ASTM D 1349 : 1999
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practice for Rubber-Standard Temperatures For Testing
Hardcopy , PDF
11-11-2014
English
10-02-1999
Important note : Users cannot be edited or removed once added to your Multi user PDF.| Committee |
D 11
|
| DocumentType |
Standard Practice
|
| Pages |
1
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy |
1.1 This practice establishes a list of standard temperatures from which selection may be made for any specific test or test method. Any standard or specification which specifies test temperatures not listed shall take precedence over this practice.
1.2 These temperatures do not apply to mixing, processing, or vulcanizing temperatures for rubber compounds. Any standard requiring preparation of a particular rubber compound should specify the conditions to be used.
1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.4 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| ASTM D 395 : 2018 | Standard Test Methods for Rubber Property—Compression Set |
| ASTM D 623 : 2007 : R2014 | Standard Test Methods for Rubber Property—Heat Generation and Flexing Fatigue In Compression |
| ASTM D 2632 : 2015 | Standard Test Method for Rubber Property—Resilience by Vertical Rebound |
| ASTM D 3389 : 2016 | Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform Abrader) |
| ASTM F 1957 : 1999 : R2017 | Standard Test Method for Composite Foam Hardness-Durometer Hardness |
| ASTM D 624 : 2000 : R2012 | Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers |
| ASTM D 1052 : 2009 : R2014 | Standard Test Method for Measuring Rubber Deterioration—Cut Growth Using Ross Flexing Apparatus |
| ASTM D 1460 : 1986 : R2014 | Standard Test Method for Rubber Property—Change in Length During Liquid Immersion |
| ASTM D 2000 : 2018 | Standard Classification System for Rubber Products in Automotive Applications |
| ASTM D 6515 : 2000 : R2016 | Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending |
| ASTM D 430 : 2006 : R2018 | Standard Test Methods for Rubber Deterioration—Dynamic Fatigue |
| ASTM D 865 : 2011 : R2018 | Standard Test Method for Rubber—Deterioration by Heating in Air (Test Tube Enclosure) |
| ASTM F 2042 : 2018 | Standard Guide for Silicone Elastomers, Gels, and Foams Used in Medical Applications Part II—Crosslinking and Fabrication |
| ASTM D 813 : 2007 : R2014 | Standard Test Method for Rubber Deterioration—Crack Growth |
| ASTM D 1415 : 2018 | Standard Test Method for Rubber Property—International Hardness |
| ASTM F 1035 : 2003 : R2015 | Standard Practice for Use of Rubber-Cord Pie Disk to Demonstrate the Discernment Capability of a Tire X-ray Imaging System |
| ASTM F 703 : 2018 | Standard Specification for Implantable Breast Prostheses |
| ASTM D 751 : 2019 | Standard Test Methods for Coated Fabrics |
| ASTM D 5099 : 2008 : R2017 | Standard Test Methods for Rubber—Measurement of Processing Properties Using Capillary Rheometry |
| ASTM D 6147 : 1997 : R2014 | Standard Test Method for Vulcanized Rubber and Thermoplastic Elastomer—Determination of Force Decay (Stress Relaxation) in Compression |
| ASTM D 573 : 2004 : R2015 | Standard Test Method for Rubber—Deterioration in an Air Oven |
| ASTM F 2508 : 2016 : EDT 1 | Standard Practice for Validation, Calibration, and Certification of Walkway Tribometers Using Reference Surfaces |
| ASTM D 3667 : 2016 | Standard Specification for Rubber Seals Used in Flat-Plate Solar Collectors |
| ASTM D 3903 : 2015 | Standard Specification for Rubber Seals Used in Air-Heat Transport of Solar Energy Systems |
| ASTM G 114 : 2014 | Standard Practices for Evaluating the Age Resistance of Polymeric Materials Used in Oxygen Service |
| ASTM D 7605 : 2011 : R2016 | Standard Test Method for Thermoplastic Elastomers—Measurement of Polymer Melt Rheological Properties and Congealed Dynamic Properties Using Rotorless Shear Rheometers |
| ASTM D 5289 : 2019 | Standard Test Method for Rubber Property—Vulcanization Using Rotorless Cure Meters |
| ASTM D 3832 : 1979 : R2017 | Standard Specification for Rubber Seals Contacting Liquids in Solar Energy Systems |
| ASTM F 477 : 2014 | Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe |
| ASTM F 1441 : 2003 : R2014 | Standard Specification for Soft-Tissue Expander Devices |
| ASTM D 3771 : 2015 | Standard Specification for Rubber Seals Used in Concentrating Solar Collectors |
| ASTM D 6601 : 2019 | Standard Test Method for Rubber Properties—Measurement of Cure and After-Cure Dynamic Properties Using a Rotorless Shear Rheometer |
| ASTM D 1646 : 2019 | Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer) |
| ASTM D 2084 : 2019 | Standard Test Method for Rubber Property—Vulcanization Using Oscillating Disk Cure Meter |
| ASTM D 1149 : 2018 | Standard Test Methods for Rubber Deterioration—Cracking in an Ozone Controlled Environment |
| ASTM D 531 : 2015 | Standard Test Method for Rubber Property—Pusey and Jones Indentation |
| ASTM D 3575 : 2014 | Standard Test Methods for Flexible Cellular Materials Made From Olefin Polymers |
| ASTM D 6746 : 2015 | Standard Test Method for Determination of Green Strength and Stress Relaxation of Raw Rubber or Unvulcanized Compounds |
| ASTM F 2051 : 2000 : R2014 | Standard Specification for Implantable Saline Filled Breast Prosthesis |
| ASTM D 1456 : 1986 : R2014 | Standard Test Method for Rubber Property—Elongation at Specific Stress |
| ASTM F 2468 : 2005 : R2019 | Standard Classification for Specifying Silicone Adhesives and Sealants for Transportation Applications |
| ASTM D 7121 : 2005 : R2018 | Standard Test Method for Rubber Property—Resilience Using Schob Type Rebound Pendulum |
| ASTM D 1630 : 2016 | Standard Test Method for Rubber Property—Abrasion Resistance (Footwear Abrader) |
| ASTM D 412 : 2016 | Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension |
| ASTM D 2240 : 2015 : EDT 1 | Standard Test Method for Rubber Property—Durometer Hardness |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.