ASTM D 1415 : 2006
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Rubber Property—International Hardness
Hardcopy , PDF
11-11-2014
English
01-10-2006
CONTAINED IN VOL. 09.01, 2015 Defines a procedure for measuring the hardness of vulcanized or thermoplastic rubber.
Committee |
D 11
|
DevelopmentNote |
Supersedes ASTM D 314. (02/2002)
|
DocumentType |
Test Method
|
Pages |
7
|
ProductNote |
Reconfirmed 2006
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1 This test method covers a procedure for measuring the hardness of vulcanized or thermoplastic rubber. The hardness is obtained by the difference in penetration depth of a specified dimension ball under two conditions of contact with the rubber: (1) with a small initial force and (2) with a much larger final force. The differential penetration is taken at a specified time and converted to a hardness scale value.
1.2 This test method is technically similar to ISO 48.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
ASTM D 1414 : 2015 | Standard Test Methods for Rubber O-Rings |
ASTM D 378 : 2010 : R2016 | Standard Test Methods for Rubber (Elastomeric) Conveyor Belting, Flat Type |
ASTM D 1566 : 2019 | Standard Terminology Relating to Rubber |
ASTM F 2468 : 2005 : R2019 | Standard Classification for Specifying Silicone Adhesives and Sealants for Transportation Applications |
ASTM D 7121 : 2005 : R2018 | Standard Test Method for Rubber Property—Resilience Using Schob Type Rebound Pendulum |
ASTM D 471 : 2016 : REV A | Standard Test Method for Rubber Property—Effect of Liquids |
ASTM C 505M : 2019 | Standard Specification for Nonreinforced Concrete Irrigation Pipe With Rubber Gasket Joints (Metric) |
ASTM C 505 : 2019 | Standard Specification for Nonreinforced Concrete Irrigation Pipe with Rubber Gasket Joints |
ASTM D 3847 : 2001 : R2018 | Standard Practice for Rubber—Directions for Achieving Subnormal Test Temperatures |
ASTM D 2240 : 2015 : EDT 1 | Standard Test Method for Rubber Property—Durometer Hardness |
ASTM D 380 : 1994 : R2012 | Standard Test Methods for Rubber Hose |
ASTM F 1957 : 1999 : R2017 | Standard Test Method for Composite Foam Hardness-Durometer Hardness |
ASTM D 6284 : 2017 | Standard Test Method for Rubber Property—Effect of Aqueous Solutions with Available Chlorine and Chloramine |
ASTM C 1187 : 2015 | Standard Guide for Establishing Surveillance Test Program for Boron-Based Neutron Absorbing Material Systems for Use in Nuclear Fuel Storage Racks In a Pool Environment |
ASTM D 120 : 2014 : REV A | Standard Specification for Rubber Insulating Gloves |
ASTM D 3319 : 2011 : R2017 | Standard Practice for the Accelerated Polishing of Aggregates Using the British Wheel |
ASTM D 3667 : 2016 | Standard Specification for Rubber Seals Used in Flat-Plate Solar Collectors |
ASTM D 3903 : 2015 | Standard Specification for Rubber Seals Used in Air-Heat Transport of Solar Energy Systems |
ASTM D 3832 : 1979 : R2017 | Standard Specification for Rubber Seals Contacting Liquids in Solar Energy Systems |
ASTM D 4014 : 2003 : R2018 | Standard Specification for Plain and Steel-Laminated Elastomeric Bearings for Bridges |
ASTM C 564 : 2014 | Standard Specification for Rubber Gaskets for Cast Iron Soil Pipe and Fittings |
ASTM F 477 : 2014 | Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe |
ASTM D 1330 : 2004 : R2015 : EDT 1 | Standard Specification for Rubber Sheet Gaskets |
ASTM D 3771 : 2015 | Standard Specification for Rubber Seals Used in Concentrating Solar Collectors |
ASTM D 1869 : 2015 | Standard Specification for Rubber Rings for Fiber-Reinforced Cement Pipe |
ASTM D 3767 : 2003 : R2014 | Standard Practice for Rubber—Measurement of Dimensions |
ASTM D 531 : 2015 | Standard Test Method for Rubber Property—Pusey and Jones Indentation |
ASTM D 1349 : 2014 : REDLINE | Standard Practice for Rubber—Standard Conditions for Testing |
ISO 48:2010 | Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD) |
ASTM D 4483 : 2014-02 | PRACTICE FOR EVALUATING PRECISION FOR TEST METHOD STANDARDS IN THE RUBBER AND CARBON BLACK MANUFACTURING INDUSTRIES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.