ASTM D 1475 : 2013 : R2025
Current
The latest, up-to-date edition.
Standard Test Method for Density of Liquid Coatings, Inks, and Related Products
English
01-05-2025
| Committee |
D 01
|
| DocumentType |
Test Method
|
| Pages |
4
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1This test method covers the measurement of density of paints, inks, varnishes, lacquers, and components thereof, other than pigments, when in fluid form.
1.2For higher precision when working with nonpigmented materials (drying oils, varnishes, resins and related materials), Test Method D1963 can be used to determine specific gravity and, thence, density.
1.3The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.3.1Exception—The values for density are to be stated in inch-pound units.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. A specific precaution statement is given in 8.1.1.1.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM E 1797 : 2012 : R2017 : EDT 1 | Standard Specification for Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
| ASTM F 940 : 1999 : R2019 : EDT 1 | Standard Practice for Quality Control Receipt Inspection Procedures for Protective Coatings (Paint), Used in Marine Construction and Shipbuilding |
| ASTM G 195 : 2022 | Standard Guide for Conducting Wear Tests Using a Rotary Platform Abraser |
| ASTM F 718 : 2022 | Standard Specification for Shipbuilders and Marine Paints and Coatings Product/Procedure Data Sheet |
| ASTM C 156 : 2020 | Standard Test Method for Water Loss [from a Mortar Specimen] Through Liquid Membrane-Forming Curing Compounds for Concrete |
| ASTM D 5913 : 1996 : R2019 | Standard Test Method for Evaluation of Cleanability of Paint Brushes |
| ASTM D 3105 : 2017 : R2024 | Standard Index of Methods for Testing Elastomeric and Plastomeric Roofing and Waterproofing Materials |
| ASTM D 5324 : 2016 : R2022 | Standard Guide for Testing Water-Borne Architectural Coatings |
| ASTM D 7680 : 2010 : R2020 | Standard Practice for Preparing Prints of Paste Printing Inks by a Motor-Driven Printability Tester |
| ASTM D 8163 : 2018 : R2023 | Standard Test Method for Determination of Strength of Colorants and Bases for Architectural, Marine, Maintenance, Commercial, and Industrial Coatings |
| ASTM D 5201 : 2005 : REV A : R2020 | Standard Practice for Calculating Formulation Physical Constants of Paints and Coatings |
| ASTM C 1241 : 2014 : R2022 | Standard Test Method for Volume Shrinkage of Latex Sealants During Cure |
| ASTM D 16 : 2024 | Standard Terminology for Paint, Related Coatings, Materials, and Applications |
| ASTM C 461 : 2023 | Standard Test Methods for Mastics and Coatings Used With Thermal Insulation |
| ASTM D 7073 : 2020 | Standard Guide for Application and Evaluation of Brush and Roller Applied Paint Films |
| ASTM E 1868 : 2010 : R2021 | Standard Test Methods for Loss-On-Drying by Thermogravimetry |
| ASTM D 2805 : 2011 : R2023 | Standard Test Method for Hiding Power of Paints by Reflectometry |
| ASTM D 3288/D3288M : 2020 | Standard Test Methods for Magnet-Wire Enamels |
| ASTM D 3794 : 2022 | Standard Guide for Testing Coil Coatings |
| ASTM D 5286 : 2020 | Standard Test Methods for Determination of Transfer Efficiency Under General Production Conditions for Spray Application of Paints |
| ASTM D 4213 : 2024 | Standard Test Method for Scrub Resistance of Paints by Abrasion Weight Loss |
| ASTM E 1795 : 2025 | Standard Specification for Non-Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
| ASTM D 6532 : 2000 : R2022 | Standard Test Method for Evaluation of the Effect of Clear Water Repellent Treatments on Water Absorption of Hydraulic Cement Mortar Specimens |
| ASTM D 3925 : 2002 : R2022 | Standard Practice for Sampling Liquid Paints and Related Pigmented Coatings |
| ASTM D 6686 : 2001 : R2019 | Standard Test Method for Evaluation of Tannin Stain Resistance of Coatings |
| ASTM D 4733 : 2024 | Standard Test Methods for Solventless Electrical Insulating Varnishes |
| ASTM D 6266 : 2000 : REV A : R2023 | Standard Test Method for Determining the Amount of Volatile Organic Compound (VOC) Released From Waterborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement) |
| ASTM D 8008 : 2020 | Standard Practice for Representative Field Sampling of Traffic Paints |
| ASTM D 5146 : 2010 : R2019 | Standard Guide to Testing Solvent-Borne Architectural Coatings |
| ASTM D 7088 : 2017 : R2023 | Standard Practice for Resistance to Hydrostatic Pressure for Coatings Used in Below Grade Applications Applied to Masonry |
| ASTM D 6886 : 2024 | Standard Test Method for Determination of the Weight Percent Individual Volatile Organic Compounds in Air-Dry Low VOC Coatings by Gas Chromatography |
| ASTM D 1823 : 2024 | Standard Test Method for Apparent Viscosity of Plastisols and Organosols at High Shear Rates by Extrusion Viscometer |
| ASTM D 4143 : 2016 : R2022 | Standard Guide for Testing Latex Vehicles |
| ASTM D 6511/D6511M : 2018 : R2024 | Standard Test Methods for Solvent Bearing Bituminous Compounds |
| ASTM D 5860 : 1995 : R2022 | Standard Test Method for Evaluation of the Effect of Water Repellent Treatments on Freeze-Thaw Resistance of Hydraulic Cement Mortar Specimens |
| ASTM D 6763 : 2016 : R2022 | Standard Guide for Testing Exterior Wood Stains and Clear Water Repellents |
| ASTM D 3960 : 2025 | Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings |
| ASTM D 5066 : 1991 : R2023 | Standard Test Method for Determination of the Transfer Efficiency Under Production Conditions for Spray Application of Automotive Paints—Weight Basis |
| ASTM D 5150 : 2024 | Standard Test Method for Hiding Power of Architectural Paints Applied by Roller |
| ASTM D 3806 : 2019 : REV A | Standard Test Method of Small-Scale Evaluation of Fire-Retardant Paints (2-Foot Tunnel Method) |
| ASTM D 7489 : 2024 | Standard Practice for Evaluating Touch-Up Properties of Architectural Coatings under Various Environmental Conditions |
| ASTM D 4142 : 1989 : R2022 | Standard Guide for Testing Epoxy Resins |
| ASTM D 2697 : 2022 | Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings |
| ASTM D 4958 : 2024 | Standard Test Method for Comparison of the Brush Drag of Latex Paints |
| ASTM D 6577 : 2024 : REV A | Standard Guide for Testing Industrial Protective Coatings |
| ASTM C 1183/C1183M : 2013 : R2024 | Standard Test Method for Extrusion Rate of Elastomeric Sealants |
| ASTM D 6904 : 2003 : R2022 | Standard Practice for Resistance to Wind-Driven Rain for Exterior Coatings Applied on Masonry |
| ASTM D 4060 : 2025 | Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser |
| ASTM D 7072 : 2004 : R2019 | Standard Practice for Evaluating Accelerated Efflorescence of Latex Coatings |
| ASTM D 2205 : 2020 | Standard Guide for Selection of Tests for Traffic Paints |
| ASTM D 115 : 2017 : R2024 | Standard Test Methods for Testing Solvent Containing Varnishes Used for Electrical Insulation |
| ASTM D 3730 : 2017 : R2022 | Standard Guide for Testing High-Performance Interior Architectural Wall Coatings |
| ASTM D 6093 : 1997 : R2022 | Standard Test Method for Percent Volume Nonvolatile Matter in Clear or Pigmented Coatings Using a Helium Gas Pycnometer |
| ASTM D 6583 : 2013 : R2019 | Standard Test Method for Porosity of Paint Film by Mineral Oil Absorption |
| ASTM D 333 : 2001 : R2021 | Standard Guide for Clear and Pigmented Lacquers |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.