ASTM D 156 : 2015 : REDLINE
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Saybolt Color of Petroleum Products (Saybolt Chromometer Method)
Available format(s)
PDF
Superseded date
20-10-2023
Superseded by
Language(s)
English
Published date
27-04-2015
Important note : Users cannot be edited or removed once added to your Multi user PDF.CONTAINED IN VOL. 05.01, 2015 Specifies the determination of the color of refined oils such as undyed motor and aviation gasoline, jet propulsion fuels, naphthas and kerosine, and, in addition, petroleum waxes and pharmaceutical white oils.
| Committee |
D 02
|
| DocumentType |
Redline
|
| Pages |
6
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy |
1.1This test method covers the determination of the color of refined oils such as undyed motor and aviation gasoline, jet propulsion fuels, naphthas and kerosine, and, in addition, petroleum waxes and pharmaceutical white oils.
Note 1:For determining the color of petroleum products darker than Saybolt Color − 16, see Test Method D1500.
1.2This test method reports results specific to this test method and recorded as, “Saybolt Color units.”
1.3The values stated in inch-pound units or in SI units and which are not in parentheses are to be regarded as the standard. The values given in parentheses are for information only.
Note 2:Oil tubes and apparatus used in this test method have traditionally been marked in inches, (the tube is required to be etched with 1/8in. divisions.) The Saybolt Color Numbers are aligned with inch, 1/2in., 1/4in., and 1/8in. changes in the depth of oil. These fractional inch changes do not readily correspond to SI equivalents and in view of the preponderance of apparatus already in use and marked in inches, the inch/pound unit is regarded as the standard. However the test method does use SI units of length when the length is not directly related to divisions on the oil tube and Saybolt Color Numbers. The test method uses SI units for temperature.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| Standards | Relationship |
| UNE 51002:1978 | Identical |
| SAE AMS3165F | Solvent, Petroleum Aromatic |
| MIL C 7024 : D | CALIBRATING FLUID, AIRCRAFT FUEL SYSTEM COMPONENTS |
| DEFSTAN 91-87/6(2009) : 2009 | TURBINE FUEL, AVIATION KEROSINE TYPE, CONTAINING FUEL SYSTEM ICING INHIBITOR - NATO CODE: F-34 - JSD: AVTUR/FSII |
| API 555 : 2013 | PROCESS ANALYZERS |
| DEFSTAN 91-86/6(2009) : 2009 | TURBINE FUEL, AVIATION KEROSINE TYPE: HIGH FLASH TYPE, CONTAINING FUEL SYSTEM ICING INHIBITOR NATO CODE: F-44 JSD: AVCAT/FSII |
| MIL T 83133 : D | TURBINE FUELS, AVIATION, KEROSENE TYPES, NATO F-34 (JP-8) AND NATO F-35 |
| MIL-DTL-83133 Revision J:2015 | TURBINE FUEL, AVIATION, KEROSENE TYPE, JP-8 (NATO F-34), NATO F-35, AND JP-8+100 (NATO F-37) |
| DEFSTAN 91-91/7(2011) : 2011 | TURBINE FUEL, KEROSINE TYPE, JET A-1 NATO CODE: F-35 JOINT SERVICE DESIGNATION: AVTUR |
| MIL-PRF-680 Revision C:2010 | DEGREASING SOLVENT |
| MIL-DTL-5624 Revision W:2016 | TURBINE FUEL, AVIATION, GRADES JP-4 AND JP-5 |
| MIL-PRF-7024 Revision F:2012 | CALIBRATING FLUIDS, AIRCRAFT FUEL SYSTEM COMPONENTS |
| A-A-3007 Base Document:1996 | THINNER, FOR PHENOL-FORMALDEHYDE AND MEDIUM OIL AND STYRENATED ALKYD PAINTS AND VARNISHES |
| MIL H 27516 : D | HOSE AND HOSE ASSEMBLY, NON-METALLIC, SUCTION AND DISCHARGE |
| SAE AMS3160J | Solvent, Petroleum |
| EI/JIG 1530 : 2013 | QUALITY ASSURANCE REQUIREMENTS FOR THE MANUFACTURE, STORAGE AND DISTRIBUTION OF AVIATION FUEL TO AIRPORTS |
| CGSB 1.124 : 1999 | THINNER FOR VINYL COATINGS |
| DEFSTAN 91-88/4(2009) : 2009 | TURBINE FUEL, AVIATION: WIDE CUT TYPE, CONTAINING FUEL SYSTEM ICING INHIBITOR - NATO CODE: F-40 - JSD: AVTAG/FSII |
| ASTM D 1836 : 2007 : R2013 | Standard Specification for Commercial Hexanes |
| ASTM D 7058 : 2004 : R2009 | Standard Test Method for Determination of the Red Dye Concentration and Estimation of Saybolt Color of Aviation Turbine Fuels and Kerosine Using a Portable Visible Spectrophotometer |
| ASTM D 3734 : 2005 : R2018 | Standard Specification for High-Flash Aromatic Naphthas |
| ASTM D 4871 : 2011 : R2016 | Standard Guide for Universal Oxidation/Thermal Stability Test Apparatus |
| ASTM D 235 : 2002 : R2012 | Standard Specification for Mineral Spirits (Petroleum Spirits) (Hydrocarbon Dry Cleaning Solvent) (Withdrawn 2021) |
| ASTM D 2785 : 1980 | Method of Test for Trace Quantities of Total Sulfur (Wickbold and Beckman Combustion Apparatus) (Withdrawn 1987) |
| ASTM D 1123 : 1999 : R2003 | Standard Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method |
| MIL-DTL-83133 Revision K:2018 | TURBINE FUEL, AVIATION, KEROSENE TYPE, JP-8 (NATO F-34), NATO F-35, AND JP-8+100 (NATO F-37) |
| UNE-EN 16245-2:2014 | Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 2: Specific requirements for resin, curing systems, additives and modifiers |
| ASTM D 1123 : 1999 : R2003 : EDT 1 | Standard Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method |
| ASTM D 1123 : 1999 : R2003e1 | TEST METHODS FOR WATER IN ENGINE COOLANT CONCENTRATE BY THE KARL FISCHER REAGENT METHOD |
| MIL-DTL-25524 Revision F:2015 | TURBINE FUEL, AVIATION, THERMALLY STABLE (JPTS) |
| CGSB-1.70 : 1999 | HIGH-SOLVENCY THINNER |
| ASTM E 284 : 2017 : REDLINE | Standard Terminology of Appearance |
| DEFSTAN 91-91/5(2005) : 2005 | TURBINE FUEL, AVIATION KEROSINE TYPE, JET A-1 NATO CODE: F-35 JOINT SERVICE DESIGNATION: AVTUR |
| DIN EN 16245-2:2013-08 | Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 2: Specific requirements for resin, curing systems, additives and modifiers |
| ASTM D 7058 : 2004 : R2014 | Standard Test Method for Determination of the Red Dye Concentration and Estimation of Saybolt Color of Aviation Turbine Fuels and Kerosine Using a Portable Visible Spectrophotometer |
| API 1543 : 2009 | DOCUMENTATION, MONITORING AND LABORATORY TESTING OF AVIATION FUEL DURING SHIPMENT FROM REFINERY TO AIRPORT |
| MIL-HDBK-510 Revision A:2014 | AEROSPACE FUELS CERTIFICATION |
| MIL PRF 5624 : S | TURBINE FUEL, AVIATION, GRADES JP-4, JP-5 AND JP-5/JP-8 ST |
| MIL T 5624 : R | TURBINE FUEL, AVIATION, GRADES JP 4 AND JP 5 |
| TT-N-97 Revision D:2007 | Naphtha; Aromatic |
| MIL H 17902 : F | HOSE, END FITTINGS AND HOSE ASSEMBLIES, SYNTHETIC RUBBER, AIRCRAFT FUELS |
| MIL H 6615 : E | HOSE ASSEMBLIES, RUBBER, FUEL AND WATER, WITH DETACHABLE COUPLINGS, LOW TEMPERATURE |
| CGSB-1.4 : 2000 CORR 2000 | PETROLEUM SPIRITS THINNER |
| ASTM D 3734 : 2005 | Standard Specification for High-Flash Aromatic Naphthas |
| MIL F 46162 : D | FUEL, DIESEL, REFEREE GRADE |
| MIL L 5020 : C | LIQUID, COMPASS, AIRCRAFT |
| CGSB-1.2 : 1998 | BOILED LINSEED OIL |
| MIL-PRF-38299 Revision E:2011 | FLUID, PURGING, FOR PRESERVING FUEL TANKS OF JET AIRCRAFT |
| MIL-DTL-87107 Revision E:2012 | Propellant, High Density Synthetic Hydrocarbon Type, Grade JP-10 |
| A-A-1788 Base Document:1997 | VARNISH, OIL: INTERIOR |
| CGSB-1.110 : M1991 CORR 1991 | GENERAL PURPOSE THINNER FOR LACQUERS |
| ASTM D 7058:2004 | Standard Test Method for Determination of the Red Dye Concentration and Estimation of Saybolt Color of Aviation Turbine Fuels and Kerosine Using a Portable Visible Spectrophotometer |
| I.S. EN 16766:2017 | BIO-BASED SOLVENTS - REQUIREMENTS AND TEST METHODS |
| SAE AMS2629E | Fluid, Jet Reference |
| ASTM D 3734 : 2005 : R2010 | Standard Specification for High-Flash Aromatic Naphthas |
| ASTM D 3735 : 2007 | Standard Specification for VMP Naphthas |
| ASTM E 805 :2012 | Standard Practice for Identification of Instrumental Methods of Color or Color-Difference Measurement of Materials |
| ASTM D 268 : 2001 : R2007 | Standard Guide for Sampling and Testing Volatile Solvents and Chemical Intermediates for Use in Paint and Related Coatings and Material |
| ASTM D 1209 : 2005 | Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale) |
| ASTM D 268 : 2001 : R2012 | Standard Guide for Sampling and Testing Volatile Solvents and Chemical Intermediates for Use in Paint and Related Coatings and Material (Withdrawn 2021) |
| CGSB 1.136 : 1992 | ANTIBLUSH THINNER FOR CELLULOSE NITRATE LACQUER |
| PD CEN/TS 16766:2015 | Bio-based solvents. Requirements and test methods |
| S.R. CEN/TS 16766:2015 | BIO-BASED SOLVENTS - REQUIREMENTS AND TEST METHODS |
| MIL-HDBK-510-1 Revision A:2010 | AEROSPACE FUELS CERTIFICATION |
| MIL-PRF-23236 Revision D:2009 | Coating Systems for Ship Structures |
| DWA-M 143-20:2018 | TEST METHOD FOR DROP IMPACT RESISTANCE OF BLOW-MOLDED THERMOPLASTIC CONTAINERS |
| BS EN 16766:2017 | Bio-based solvents. Requirements and test methods |
| ASTM D 1569 : 2005 : R2014 | Standard Test Methods for Detergent Alkylate (Withdrawn 2023) |
| MIL-I-36698 Revision A:1975 | IMMERSION OIL, MICROSCOPY |
| MIL-DTL-27516 Revision G:2011 | Hose and Hose Assembly, Nonmetallic, Suction and Discharge |
| ASTM D 3735 : 2007 : R2012 | Standard Specification for VM&P Naphthas (Withdrawn 2021) |
| ASTM D 235 : 2002 | Standard Specification for Mineral Spirits (Petroleum Spirits) (Hydrocarbon Dry Cleaning Solvent) |
| ASTM D 1209 : 2005 : EDT 1 | Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale) |
| ASTM E 805 : 2012 : REV A | Standard Practice for Identification of Instrumental Methods of Color or Color-Difference Measurement of Materials |
| I.S. EN 16245-2:2013 | FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 2: SPECIFIC REQUIREMENTS FOR RESIN, CURING SYSTEMS, ADDITIVES AND MODIFIERS |
| CGSB 1.164 : 1999 | SOLVENT FOR VINYL PRETREATMENT COATING |
| ASTM D 2884 : 1993 : R1998 | Standard Test Method for Yield Stress of Heterogeneous Propellants by Cone Penetration Method |
| ASTM D 1500 : 2012 : R2017 | Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale) |
| ASTM D 7618 : 2013 : R2017 | Standard Specification for Ethyl Tertiary-Butyl Ether (ETBE) for Blending with Aviation Spark-Ignition Engine Fuel |
| ASTM D 128 : 1998 | Standard Test Methods for Analysis of Lubricating Grease |
| ASTM D 235 : 2002 : R2007 | Standard Specification for Mineral Spirits (Petroleum Spirits) (Hydrocarbon Dry Cleaning Solvent) |
| ASTM D 2884 : 1993 : R2002 | Standard Test Method for Yield Stress of Heterogeneous Propellants by Cone Penetration Method |
| ASTM D 7618 : 2013 | Standard Specification for Ethyl Tertiary-Butyl Ether (ETBE) for Blending with Aviation Spark-Ignition Engine Fuel |
| ASTM D 7847 : 2017 : REDLINE | Standard Guide for Interlaboratory Studies for Microbiological Test Methods |
| ASTM D 1209 : 2005 : R2011 | Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale) |
| EN 16245-2:2013 | Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 2: Specific requirements for resin, curing systems, additives and modifiers |
| UNI EN 16245-2 : 2013 | FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 2: SPECIFIC REQUIREMENTS FOR RESIN, CURING SYSTEMS, ADDITIVES AND MODIFIERS |
| ASTM E 805 : 2012 : REV A : R2017 | Standard Practice for Identification of Instrumental Methods of Color or Color-Difference Measurement of Materials |
| BS EN 16245-2:2013 | Fibre-reinforced plastic composites. Declaration of raw material characteristics Specific requirements for resin, curing systems, additives and modifiers |
| MIL-DTL-17902 Revision G:2013 | HOSE, END FITTINGS AND HOSE ASSEMBLIES, SYNTHETIC RUBBER, AIRCRAFT FUELS |
| MIL-DTL-6615 Revision G:2008 | Hose Assemblies, Rubber, Fuel and Nonpotable Water, with Reattachable Couplings, Low Temperature, General Specification for |
| ASTM D 128 : 1998 : R2014 : EDT 1 | Standard Test Methods for Analysis of Lubricating Grease |
| ASTM D 6045 : 2012 | Standard Test Method for Color of Petroleum Products by the Automatic Tristimulus Method |
| CGSB-1.94 : M89 | XYLENE THINNER (XYLOL) |
| ASTM D 6045 : 2012 : R2017 | Standard Test Method for Color of Petroleum Products by the Automatic Tristimulus Method |
| ASTM UOP 793 : 2012 | Color Stability of Petroleum Distillates |
| MIL H 26521 : J | HOSE ASSEMBLY, NONMETALLIC, FUEL, COLLAPSIBLE, LOW TEMPERATURE WITH NON-REUSABLE COUPLINGS |
| DEFSTAN 91-91/8(2016) : 2016 | TURBINE FUEL, AVIATION KEROSINE TYPE, JET A-1 NATO CODE: F-35 JOINT SERVICE DESIGNATION: AVTUR |
| MIL-P-82522 Revision C:1990 | PROPELLANT, JET ENGINE, T-H DIMER, GRADE RJ-4 |
| MIL P 87107 : C | PROPELLANT, HIGH DENSITY SYNTHETIC HYDROCARBON TYPE, GRADE JP-9 AND JP-10 |
| ASTM D 1123 : 1999 | Standard Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method |
| ASTM D 1569 : 2005 | Standard Test Methods for Detergent Alkylate |
| DEFSTAN 91-87/5(2005) : 2005 | TURBINE FUEL, AVIATION KEROSINE TYPE: CONTAINING FUEL SYSTEM ICING INHIBITOR NATO CODE: F-34 JOINT SERVICE DESIGNATION: AVTUR/FSII |
| ASTM D 128 : 1998 : R2003 : EDT 1 | Standard Test Methods for Analysis of Lubricating Grease |
| DEFSTAN 91-091/9(2016) : 2016 | TURBINE FUEL, AVIATION KEROSINE TYPE, JET A-1 NATO CODE: F-35 JOINT SERVICE DESIGNATION: AVTUR |
| ASTM D 268 : 2001 | Standard Guide for Sampling and Testing Volatile Solvents and Chemical Intermediates for Use in Paint and Related Coatings and Material |
| ASTM D 128 : 1998 : R2008 | Standard Test Methods for Analysis of Lubricating Grease |
| ASTM D 1123 : 1999 : R2009 | Standard Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method |
| ASTM D 1655 : 2018-01 | SPECIFICATION FOR AVIATION TURBINE FUELS |
| EN 16766:2017 | Bio-based solvents - Requirements and test methods |
| EI 1590 : 2014 | SPECIFICATIONS AND QUALIFICATION PROCEDURES FOR AVIATION FUEL MICROFILTERS |
| EI 1598 : 2012 | DESIGN, FUNCTIONAL REQUIREMENTS AND LABORATORY TESTING PROTOCOLS FOR ELECTRONIC SENSORS TO MONITOR FREE WATER AND/OR PARTICULATE MATTER IN AVIATION FUEL |
| EI 1581 : 2016 | SPECIFICATIONS AND LABORATORY QUALIFICATION PROCEDURES FOR AVIATION FUEL FILTER/WATER SEPARATORS |
| CGSB-1.5 : M91(R1999) | LOW FLASH PETROLEUM SPIRITS THINNER |
| DEFSTAN 91-88/3(2005) : 2005 | TURBINE FUEL, AVIATION: WIDE CUT TYPE, CONTAINING FUEL SYSTEM ICING INHIBITOR NATO CODE: F-40 JOINT SERVICE DESIGNATION: AVTAG/FSII |
| MIL-DTL-5020 Revision F:2015 | Liquid, Compass, Aircraft |
| ASTM D 2889 : 1995 : R2015 | Standard Test Method for Calculation of True Vapor Pressures of Petroleum Distillate Fuels |
| ASTM D 128 : 1998 : R2014 | Standard Test Methods for Analysis of Lubricating Grease |
| ASTM D 4871 : 2011 | Standard Guide for Universal Oxidation/Thermal Stability Test Apparatus |
| MIL-E-37007 Revision A:1975 | EMBEDDING COMPOUND, LABORATORY, PARAFFIN AND PLASTIC POLYMERS |
| MIL-DTL-26521 Revision L:2014 | Hose Assembly, Nonmetallic, Fuel, Collapsible, Low Temperature with Non-Reusable Couplings |
| DEFSTAN 91-91/6(2008) : 2008 | TURBINE FUEL, AVIATION KEROSINE TYPE, JET A-1 NATO CODE: F-35 JOINT SERVICE DESIGNATION: AVTUR |
| O-E-751 Revision D:2015 | ETHER, PETROLEUM; TECHNICAL GRADE |
| BS 2000-146(1993) : 1993 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - DETERMINATION OF FOAMING CHARACTERISTICS OF LUBRICATING OILS |
| MIL-DTL-46162 Revision E:2002 | FUEL, DIESEL, REFEREE GRADE |
| DEFSTAN 91-86/5(2005) : 2005 | TURBINE FUEL, AVIATION KEROSINE TYPE: HIGH FLASH TYPE, CONTAINING FUEL SYSTEM ICING INHIBITOR NATO CODE: F-44 JOINT SERVICE DESIGNATION: AVCAT/FSII |
| MIL-DTL-87173 Revision C:2014 | PROPELLANT, PRIMING FLUID ALCM, GRADE PF-1 |
| SAE AMS3161C | Oil, Odorless Heavy Solvent |
| ASTM D 1500 : 2012 | Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale) |
| EI/JIG 1530 : 2019 | Quality assurance requirements for the manufacture, storage and distribution of aviation fuel to airports (A4) |
| SAE J357_201601 | Physical and Chemical Properties of Engine Oils |
| ASTM D 3699 : 2013-05 | SPECIFICATION FOR KEROSINE |
| ASTM D 1123 : 1999 : R2015 | Standard Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method |
| ASTM D 1836 : 2007 | Standard Specification for Commercial Hexanes |
| CEN/TS 16766:2015 | Bio-based solvents - Requirements and test methods |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.