ASTM D 1763 : 2000 : R2013
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Epoxy Resins
Hardcopy , PDF
26-07-2021
English
11-11-2013
CONTAINED IN VOL. 08.01, 2015 Covers totally reactive epoxy resins supplied as liquids or solids which can be used for castings, coatings, tooling, potting, adhesives, or reinforced applications.
Committee |
D 20
|
DocumentType |
Standard
|
Pages |
3
|
ProductNote |
Reconfirmed 2013
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This specification covers totally reactive epoxy resins supplied as liquids or solids which can be used for castings, coatings, tooling, potting, adhesives, or reinforced applications. The addition of hardeners in the proper proportions causes these resins to polymerize into infusible products. The properties of these products can be modified by the addition of various fillers, reinforcements, extenders, plasticizers, thixotropic agents, etc. The epoxy resins described also can be used as stabilizers and cross-linking agents; and they can be combined with other reactive products.
1.2It is not the function of this specification to provide engineering data or to guide the purchaser in the selection of a material for a specific end use. Ordinarily the properties listed in Table 1 and Table 2 are sufficient to characterize a material under this specification, and it is recommended that routine inspection be limited to testing for such properties.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
1.4The values stated in SI units are to be regarded as standard.
ASTM D 6489 : 1999 : R2020 | Standard Test Method for Determining the Water Absorption of Hardened Concrete Treated With a Water Repellent Coating |
ASTM D 3840 : 2019 | Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Fittings for Nonpressure Applications |
ASTM F 2207 : 2006 : R2019 | Standard Specification for Cured-in-Place Pipe Lining System for Rehabilitation of Metallic Gas Pipe |
ASTM F 602 : 2009 : R2015 | Standard Criteria for Implantable Thermoset Epoxy Plastics (Withdrawn 2024) |
ASTM D 3840 : 2014 | Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Fittings for Nonpressure Applications |
ASTM F 2027 : 2016 | Standard Guide for Characterization and Testing of Raw or Starting Materials for Tissue-Engineered Medical Products |
ASTM D 6489 : 1999 : R2012 | Standard Test Method for Determining the Water Absorption of Hardened Concrete Treated With a Water Repellent Coating |
ASTM D 1544 : 1998 | Standard Test Method for Color of Transparent Liquids (Gardner Color Scale) |
ASTM D 3892 : 2015 : R2020 | Standard Practice for Packaging/Packing of Plastics |
ASTM D 1209 : 2000 | Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale) |
ASTM D 3104 : 1999 : R2005 | Standard Test Method for Softening Point of Pitches (Mettler Softening Point Method) |
ASTM D 3892 : 1993 : R2003 | Standard Practice for Packaging/Packing of Plastics |
ASTM D 1652 : 2004 | Standard Test Method for Epoxy Content of Epoxy Resins |
ASTM D 3892 : 2015 | Standard Practice for Packaging/Packing of Plastics |
ASTM D 3104 : 1999 : R2010 | Standard Test Method for Softening Point of Pitches (Mettler Softening Point Method) |
ASTM D 1652 : 2011 : EDT 1 | Standard Test Method for Epoxy Content of Epoxy Resins |
ASTM D 3892 : 1993 : R1998 | Standard Practice for Packaging/Packing of Plastics |
ASTM D 1652 : 2011 | Standard Test Method for Epoxy Content of Epoxy Resins |
ASTM D 1544 : 2004 : R2018 | Standard Test Method for Color of Transparent Liquids (Gardner Color Scale) |
ASTM D 3104 : 2014 : REV A | Standard Test Method for Softening Point of Pitches (Mettler Softening Point Method) |
ASTM D 445 : 1988 | Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and the Calculation of Dynamic Viscosity) |
ASTM D 445 : 2019 : REV A | Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity) |
ASTM D 1209 : 2005 : EDT 1 | Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale) |
ASTM D 1652 : 2011 : R2019 | Standard Test Method for Epoxy Content of Epoxy Resins |
ISO 3673-1:1996 | Plastics Epoxy resins Part 1: Designation |
ASTM D 1544 : 2004 | Standard Test Method for Color of Transparent Liquids (Gardner Color Scale) |
ASTM D 445 : 2001 | Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (the Calculation of Dynamic Viscosity) |
ASTM D 445 : 2021 | Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity) |
ASTM D 1209 : 2005 : R2011 | Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale) |
ASTM D 3892 : 1993 : R2009 | Standard Practice for Packaging/Packing of Plastics |
ASTM D 1544 : 2004 : R2010 | Standard Test Method for Color of Transparent Liquids (Gardner Color Scale) |
ASTM D 1652 : 1997 | Standard Test Methods for Epoxy Content of Epoxy Resins |
ASTM D 1209 : 2005 | Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale) |
ASTM D 3104 : 2014 | Standard Test Method for Softening Point of Pitches (Mettler Softening Point Method) |
ASTM D 3104 : 1999 | Standard Test Method for Softening Point of Pitches (Mettler Softening Point Method) |
ASTM D 3892 : 2015 : REDLINE | PRACTICE FOR PACKAGING/PACKING OF PLASTICS |
ASTM D 3104 : 2014 : REV A : R2018 | Standard Test Method for Softening Point of Pitches (Mettler Softening Point Method) |
ASTM D 1209 : 2005 : R2019 | Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.