ASTM D 1900 : 2019
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practice for Carbon Black—Sampling Bulk Shipments
Hardcopy , PDF
26-11-2020
English
22-11-2019
Important note : Users cannot be edited or removed once added to your Multi user PDF.| Committee |
D 24
|
| DocumentType |
Standard Practice
|
| Pages |
2
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This practice covers procedures for the sampling and data reporting of bulk shipments of carbon black in three-compartment hopper rail cars and compartmented bulk hopper trailers.
Note 1:The tests to be made on the samples obtained by this practice, how many samples are taken, where they are taken, and what statistical values (if any) to report shall be determined by agreement between the purchaser and the manufacturer. This practice gives guidance for use in developing such agreements or for use when no formal agreement exists. The specific details of each procedure are described in appropriate ASTM test methods used for testing carbon black.
Note 2:Some purchasers or manufacturers may consider Flexible Intermediate Bulk Containers (FIBC) to be a bulk shipment. See Practice D1799 for guidance on sampling and reporting for this package.
1.2The values stated in SI units are to be regarded as standard. The values given in parentheses are for information only.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM D 1512 : 2015 : REV B | Standard Test Methods for Carbon Black—pH Value |
| ASTM D 1619 : 2016 : REV A | Standard Test Methods for Carbon Black—Sulfur Content |
| ASTM D 3493 : 2019 | Standard Test Method for Carbon Black—Oil Absorption Number of Compressed Sample (COAN) |
| ASTM D 6556 : 2019 | Standard Test Method for Carbon Black—Total and External Surface Area by Nitrogen Adsorption |
| ASTM D 5604 : 1996 : R2017 | Standard Test Methods for Precipitated Silica—Surface Area by Single Point B.E.T. Nitrogen Adsorption |
| ASTM D 5230 : 2014 : EDT 1 | Standard Test Method for Carbon Black—Automated Individual Pellet Hardness |
| ASTM D 1508 : 2012 : R2017 | Standard Test Method for Carbon Black, Pelleted Fines and Attrition |
| ASTM D 7724 : 2018 | Standard Test Method for Carbon Black—Non-Dispersible Matter by Mechanical Flushing (NDM) |
| ASTM D 1513 : 2005 : R2017 | Standard Test Method for Carbon Black, Pelleted—Pour Density |
| ASTM D 5817 : 2003 : REV A : R2014 | Standard Practice for Carbon Black, Pelleted—Reduction, Blending, and Drying of Gross Samples for Testing |
| ASTM D 1506 : 2015 | Standard Test Methods for Carbon Black—Ash Content |
| ASTM D 2414 : 2019 | Standard Test Method for Carbon Black—Oil Absorption Number (OAN) |
| ASTM D 1511 : 2012 : R2017 | Standard Test Method for Carbon Black—Pellet Size Distribution |
| ASTM D 1509 : 2018 | Standard Test Methods for Carbon Black—Heating Loss |
| ASTM D 1937 : 2018 | Standard Test Method for Carbon Black, Pelleted—Mass Strength |
| ASTM D 1514 : 2015 | Standard Test Method for Carbon Black—Sieve Residue |
| ASTM D 3192 : 2009 : R2019 | Standard Test Methods for Carbon Black Evaluation in NR (Natural Rubber) |
| ASTM D 6845 : 2018 | Standard Test Method for Silica, Precipitated, Hydrated—CTAB (Cetyltrimethylammonium Bromide) Surface Area |
| ASTM D 3191 : 2010 : R2014 | Standard Test Methods for Carbon Black in SBR (Styrene-Butadiene Rubber)—Recipe and Evaluation Procedures |
| ASTM D 7854 : 2018 : REV C | Standard Test Method for Carbon Black-Void Volume at Mean Pressure |
| ASTM D 1618 : 2018 | Standard Test Method for Carbon Black Extractables—Transmittance of Toluene Extract |
| ASTM D 5817 : 2019 | Standard Practice for Carbon Black, Pelleted—Reduction, Blending, and Drying of Gross Samples for Testing |
| ASTM D 5817 : 2020 | Standard Practice for Carbon Black, Pelleted—Reduction, Blending, and Drying of Gross Samples for Testing |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.