• Shopping Cart
    There are no items in your cart

ASTM D 1945 : 2014 : R2019

Current

Current

The latest, up-to-date edition.

Standard Test Method for Analysis of Natural Gas by Gas Chromatography

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

26-09-2023

€61.92
Excluding VAT

Committee
D 03
DocumentType
Test Method
Pages
17
PublisherName
American Society for Testing and Materials
Status
Current
Supersedes

1.1This test method covers the determination of the chemical composition of natural gases and similar gaseous mixtures within the range of composition shown in Table 1. This test method may be abbreviated for the analysis of lean natural gases containing negligible amounts of hexanes and higher hydrocarbons, or for the determination of one or more components, as required.

1.2The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

ASTM D 8080 : 2021 Standard Specification for Compressed Natural Gas (CNG) and Liquefied Natural Gas (LNG) Used as a Motor Vehicle Fuel
ASTM D 7833 : 2020 Standard Test Method for Determination of Hydrocarbons and Non-Hydrocarbon Gases in Gaseous Mixtures by Gas Chromatography
ASTM D 7165 : 2022 Standard Practice for Gas Chromatograph Based On-line/At-line Analysis for Sulfur Content of Gaseous Fuels
ASTM D 5504 : 2020 Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence
ASTM D 2426 : 2023 Standard Test Method for Butadiene Dimer and Styrene in Butadiene Concentrates by Gas Chromatography
ASTM D 8487 : 2023 Standard Specification for Natural Gas, Hydrogen Blends for Use as a Motor Vehicle Fuel
ASTM D 7940 : 2021 Standard Practice for Analysis of Liquefied Natural Gas (LNG) by Fiber-Coupled Raman Spectroscopy
ASTM D 7164 : 2021 Standard Practice for On-line/At-line Heating Value Determination of Gaseous Fuels by Gas Chromatography
ASTM D 6332 : 2012 : R2021 Standard Guide for Testing Systems for Measuring Dynamic Responses of Carbon Monoxide Detectors to Gases and Vapors
ASTM D 8488 : 2022 Standard Test Method for Determination of Hydrogen Sulfide (H<inf>2</inf>S) in Natural Gas by Tunable Diode Laser Spectroscopy (TDLAS)
ASTM D 3588 : 1998 : R2017 : EDT 1 Standard Practice for Calculating Heat Value, Compressibility Factor, and Relative Density of Gaseous Fuels
ASTM D 7800/D7800M : 2023 Standard Test Method for Determination of Elemental Sulfur in Natural Gas
ASTM D 6968 : 2003 : R2015 Standard Test Method for Simultaneous Measurement of Sulfur Compounds and Minor Hydrocarbons in Natural Gas and Gaseous Fuels by Gas Chromatography and Atomic Emission Detection (Withdrawn 2024)
ASTM D 3588 : 1998 : R2017 Standard Practice for Calculating Heat Value, Compressibility Factor, and Relative Density of Gaseous Fuels
ASTM D 5287 : 2008 : R2015 Standard Practice for Automatic Sampling of Gaseous Fuels (Withdrawn 2024)
ASTM D 2426 : 2019 Standard Test Method for Butadiene Dimer and Styrene in Butadiene Concentrates by Gas Chromatography
ASTM D 7940 : 2014 Standard Practice for Analysis of Liquefied Natural Gas (LNG) by Fiber-Coupled Raman Spectroscopy
ASTM D 7164 : 2010 : R2015 Standard Practice for On-line/At-line Heating Value Determination of Gaseous Fuels by Gas Chromatography
ASTM D 6332 : 2012 : R2017 Standard Guide for Testing Systems for Measuring Dynamic Responses of Carbon Monoxide Detectors to Gases and Vapors
ASTM D 6228 : 2019 Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Flame Photometric Detection
ASTM D 7800/D7800M : 2014 Standard Test Method for Determination of Elemental Sulfur in Natural Gas (Withdrawn 2023)
ASTM D 7833 : 2014 Standard Test Method for Determination of Hydrocarbons and Non-Hydrocarbon Gases in Gaseous Mixtures by Gas Chromatography
ASTM D 5504 : 2012 Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence
ASTM D 7165 : 2010 : R2015 Standard Practice for Gas Chromatograph Based On-line/At-line Analysis for Sulfur Content of Gaseous Fuels

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.