ASTM D 1976 : 2018
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Elements in Water by Inductively-Coupled Plasma Atomic Emission Spectroscopy
Hardcopy , PDF
08-09-2020
English
01-07-2018
Committee |
D 19
|
DocumentType |
Test Method
|
Pages |
15
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This test method covers the determination of dissolved, total-recoverable, or total elements in drinking water, ground water, surface water, domestic, commercial or industrial wastewaters,2,3 within the following concentration ranges:
1.2It is the user's responsibility to ensure the validity of the test method for waters of untested matrices.
1.3The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see Note 2 and Section 9.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM D 7260 : 2019 | Standard Practice for Optimization, Calibration, and Validation of Inductively Coupled Plasma-Atomic Emission Spectrometry (ICP-AES) for Elemental Analysis of Petroleum Products and Lubricants |
ASTM A 1095 : 2015 : R2019 | Standard Specification for High-Silicon Molybdenum Ferritic Iron Castings |
ASTM D 7728 : 2018 | Standard Guide for Selection of ASTM Analytical Methods for Implementation of International Cyanide Management Code Guidance |
ASTM D 5127 : 2013 : R2018 | Standard Guide for Ultra-Pure Water Used in the Electronics and Semiconductor Industries |
ASTM D 3920 : 2018 | Standard Test Method for Strontium in Water |
ASTM D 4309 : 2018 | Standard Practice for Sample Digestion Using Closed Vessel Microwave Heating Technique for the Determination of Total Metals in Water |
ASTM D 3866 : 2018 | Standard Test Methods for Silver in Water |
ASTM D 4382 : 2018 | Standard Test Method for Barium in Water, Atomic Absorption Spectrophotometry, Graphite Furnace |
ASTM D 1687 : 2017 | Standard Test Methods for Chromium in Water |
ASTM D 1688 : 2017 | Standard Test Methods for Copper in Water |
ASTM D 1691 : 2017 | Standard Test Methods for Zinc in Water |
ASTM D 1971 : 2016 | Standard Practices for Digestion of Water Samples for Determination of Metals by Flame Atomic Absorption, Graphite Furnace Atomic Absorption, Plasma Emission Spectroscopy, or Plasma Mass Spectrometry |
ASTM E 1915 : 2013 | Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials for Carbon, Sulfur, and Acid-Base Characteristics |
ASTM D 3372 : 2017 | Standard Test Method for Molybdenum in Water |
ASTM D 3373 : 2017 | Standard Test Method for Vanadium in Water |
ASTM D 3557 : 2017 | Standard Test Methods for Cadmium in Water |
ASTM D 858 : 2017 | Standard Test Methods for Manganese in Water |
ASTM D 6469 : 2017 | Standard Guide for Microbial Contamination in Fuels and Fuel Systems |
ASTM E 2941 : 2014 | Standard Practices for Extraction of Elements from Ores and Related Metallurgical Materials by Acid Digestion |
ASTM D 8006 : 2016 | Standard Guide for Sampling and Analysis of Residential and Commercial Water Supply Wells in Areas of Exploration and Production (E&P) Operations |
ASTM E 2242 : 2002 | Standard Test Method for Column Percolation Extraction of Mine Rock by the Meteoric Water Mobility Procedure |
ASTM D 8006 : 2016 | Standard Guide for Sampling and Analysis of Residential and Commercial Water Supply Wells in Areas of Exploration and Production (E&P) Operations |
ASTM E 1915 : 1999 | Standard Test Method for Analysis of Metal Bearing Ores and Related Materials by Combustion Infrared Absorption Spectrometry |
ASTM D 5673 : 2015 | Standard Test Method for Elements in Water by Inductively Coupled Plasma—Mass Spectrometry |
ASTM D 5744 : 1996 | Standard Test Method for Accelerated Weathering of Solid Materials Using a Modified Humidity Cell |
ASTM D 1066 : 2018 | Standard Practice for Sampling Steam |
ASTM D 1066 : 2018 : EDT 1 | Standard Practice for Sampling Steam |
ASTM D 5673 : 1996 | Standard Test Method for Elements in Water by Inductively Coupled Plasma—Mass Spectrometry |
ASTM D 2777 : 1998 | Standard Practice for Determination of Precision and Bias of Applicable Methods of Committee D-19 on Water |
ASTM D 1129 : 1999 : REV A | Standard Terminology Relating to Water |
ASTM D 1066 : 1997 : R2001 | Standard Practice for Sampling Steam |
ASTM D 6234 : 1998 | Standard Test Method for Shake Extraction of Mining Waste by the Synthetic Precipitation Leaching Procedure |
ASTM D 3370 : 1976 | Standard Practices for Sampling Water |
ASTM D 1193 : 1970 | Standard Specification For Reagent Water |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.