ASTM D 198 : 2015 : REDLINE
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Methods of Static Tests of Lumber in Structural Sizes
13-08-2021
English
01-09-2015
CONTAINED IN VOL. 04.10, 2016 Gives the evaluation of lumber and wood-based materials in structural sizes by various testing procedures.
Committee |
D 07
|
DocumentType |
Redline
|
Pages |
35
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy |
1.1These test methods cover the evaluation of lumber and wood-based products in structural sizes by various testing procedures.
1.2The test methods appear in the following order:
Sections | |
Flexure | 4 – 11 |
Compression (Short Specimen) | 13 – 20 |
Compression (Long Specimen) | 21 – 28 |
Tension | 29 – 36 |
Torsion | 37 – 44 |
Shear Modulus | 45 – 52 |
1.3Notations and symbols relating to the various testing procedures are given in Appendix X1.
1.4The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
ASTM D 6570 : 2004 | Standard Practice for Assigning Allowable Properties for Mechanically-Graded Lumber |
ASTM D 1990 : 2016 : REDLINE | Standard Practice for Establishing Allowable Properties for Visually-Graded Dimension Lumber from In-Grade Tests of Full-Size Specimens |
ASTM D 6874 : 2012 : REDLINE | Standard Test Methods for Nondestructive Evaluation of Wood-Based Flexural Members Using Transverse Vibration |
ASTM E 2954 : 2015 | Standard Test Method for Axial Compression Test of Reinforced Plastic and Polymer Matrix Composite Vertical Members |
ASTM D 7341 : 2014 : REDLINE | Standard Practice for Establishing Characteristic Values for Flexural Properties of Structural Glued Laminated Timber by Full-Scale Testing |
ASTM D 4945 : 2017 : REDLINE | Standard Test Method for High-Strain Dynamic Testing of Deep Foundations |
ASME A17.1 : 2016 | SAFETY CODE FOR ELEVATORS AND ESCALATORS - INCLUDES REQUIREMENTS FOR ELEVATORS, ESCALATORS, DUMBWAITERS, MOVING WALKS, MATERIAL LIFTS, AND DUMBWAITERS WITH AUTOMATIC TRANSFER DEVICES |
ASTM D 1036 : 1999 : R2012 | Standard Test Methods of Static Tests of Wood Poles |
CSA O122 : 2016 | STRUCTURAL GLUED-LAMINATED TIMBER |
CSA O437 SERIES : 1993 | STANDARDS ON OSB AND WAFERBOARD |
ISO 8375:2017 | Timber structures — Glued laminated timber — Test methods for determination of physical and mechanical properties |
AASHTO T 298 : 2015 | METHOD OF TEST FOR HIGH-STRAIN DYNAMIC TESTING OF PILES |
ASTM D 6815 : 2009 : R2015 | Standard Specification for Evaluation of Duration of Load and Creep Effects of Wood and Wood-Based Products |
ASTM D 6570 : 2004 : R2010 | Standard Practice for Assigning Allowable Properties for Mechanically Graded Lumber |
ISO 16598:2015 | Timber structures Structural classification for sawn timber |
ASTM D 1036 : 1999 : R2017 | Standard Test Methods of Static Tests of Wood Poles |
ASAE EP484.1 : 1996 | DIAPHRAGM DESIGN OF METAL-CLAD, POST-FRAME RECTANGULAR BUILDINGS |
ASTM D 7469 : 2016 : REDLINE | Standard Test Methods for End-Joints in Structural Wood Products |
ASTM D 7381:2007 | Standard Practice for Establishing Allowable Stresses for Round Timbers for Piles from Tests of Full-Size Material |
ISO 13910:2014 | Timber structures Strength graded timber Test methods for structural properties |
ASTM D 6815 : 2009 | Standard Specification for Evaluation of Duration of Load and Creep Effects of Wood and Wood-Based Products |
ASTM D 7857 : 2016 | Standard Test Method for Evaluating the Flexural Properties and Internal Bond Strength of Fire-Retarded Mat-Formed Wood Structural Composite Panels Exposed to Elevated Temperatures |
ASTM D 7032 : 2017 : REDLINE | Standard Specification for Establishing Performance Ratings for Wood-Plastic Composite and Plastic Lumber Deck Boards, Stair Treads, Guards, and Handrails |
ISO 22390:2010 | Timber structures Laminated veneer lumber Structural properties |
09/30192012 DC : 0 | BS ISO 22390-1 - TIMBER STRUCTURES - LAMINATED VENEER LUMBER (LVL) - PART 1: STRUCTURAL PROPERTIES |
ASTM D 1036 : 1999 : R2005 | Standard Test Methods of Static Tests of Wood Poles |
ASTM D 7199 : 2007 | Standard Practice for Establishing Characteristic Values for Reinforced Glued Laminated Timber (Glulam) Beams Using Mechanics-Based Models |
ASTM D 6570 : 2004 : EDT 1 | Standard Practice for Assigning Allowable Properties for Mechanically Graded Lumber |
ASTM D 143 : 2014 : REDLINE | Standard Test Methods for Small Clear Specimens of Timber |
ASTM D 7199 : 2007 : R2012 | Standard Practice for Establishing Characteristic Values for Reinforced Glued Laminated Timber (Glulam) Beams Using Mechanics-Based Models |
ASTM D 7381 : 2007 : R2013 | Standard Practice for Establishing Allowable Stresses for Round Timbers for Piles from Tests of Full-Size Material |
ASTM D 2915 : 2017 : REDLINE | Standard Practice for Sampling and Data-Analysis for Structural Wood and Wood-Based Products |
ASTM D 1036 : 1999 | Standard Test Methods of Static Tests of Wood Poles |
ASME A17.1-2016/CSA B44-16 | Safety code for elevators and escalators (Bi-national standard, with ASME A17.1) |
ASTM D 1990 : 2019 : REDLINE | Standard Practice for Establishing Allowable Properties for Visually-Graded Dimension Lumber from In-Grade Tests of Full-Size Specimens |
ASTM E 177 : 2014 : REDLINE | Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods |
ASTM D 9 : 2012 : REDLINE | Standard Terminology Relating to Wood and Wood-Based Products |
ASTM E 83 : 2016 : REDLINE | Standard Practice for Verification and Classification of Extensometer Systems |
ASTM D 4442 : 2016 : REDLINE | Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Based Materials |
ASTM D 7438 : 2013 : REDLINE | Standard Practice for Field Calibration and Application of Hand-Held Moisture Meters |
ASTM D 2395 : 2017 : REDLINE | Standard Test Methods for Density and Specific Gravity (Relative Density) of Wood and Wood-Based Materials |
ASTM E 2309 : 2005 | Standard Practices for Verification of Displacement Measuring Systems and Devices Used in Material Testing Machines |
ASTM D 2915 : 2017 : REDLINE | Standard Practice for Sampling and Data-Analysis for Structural Wood and Wood-Based Products |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.