ASTM D 1997 : 2013
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Laboratory Determination of the Fiber Content of Peat Samples by Dry Mass
Hardcopy , PDF
30-07-2020
English
01-06-2013
Important note : Users cannot be edited or removed once added to your Multi user PDF.| Committee |
D 18
|
| DocumentType |
Test Method
|
| Pages |
3
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This test method covers the laboratory determination of the fiber content of peat (as defined in Classification D4427) by dry mass. It also may be used for non-peat organic soil materials.
1.2Because this test method is simple and requires no sophisticated equipment to perform, it is especially recommended for routine reconnaissance work, where large numbers of samples need to be tested and mineral contents are low.
1.3The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. Alternate sieve designations in parentheses are as provided in Specification E11. Use Practice D6026 for determining significant digits to report.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| ASTM F 2396 : 2011 | Standard Guide for Construction of High Performance Sand-Based Rootzones for Athletic Fields |
| ASTM D 4427 : 2018 | Standard Classification of Peat Samples by Laboratory Testing |
| ASTM F 2747 : 2019 | Standard Guide for Construction of Sand-based Rootzones for Golf Putting Greens and Tees |
| ASTM F 2396 : 2011 : R2019 | Standard Guide for Construction of High Performance Sand-Based Rootzones for Athletic Fields |
| ASTM D 2974 : 2020 | Standard Test Methods for Determining the Water (Moisture) Content, Ash Content, and Organic Material of Peat and Other Organic Soils |
| ASTM D 3740 : 2012 | Standard Practice for Minimum Requirements for Agencies Engaged in Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction |
| ASTM D 3740 : 2019 | Standard Practice for Minimum Requirements for Agencies Engaged in Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction |
| ASTM D 3740 : 2004 : REV A : EDT 1 | Standard Practice for Minimum Requirements for Agencies Engaged in the Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction |
| ASTM D 2974 : 2007 : REV A | Standard Test Methods for Moisture, Ash, and Organic Matter of Peat and Other Organic Soils |
| ASTM D 3740 : 2008 | Standard Practice for Minimum Requirements for Agencies Engaged in Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction |
| ASTM D 6026 : 2013 | Standard Practice for Using Significant Digits in Geotechnical Data |
| ASTM D 4427 : 1992 : R2007 | Standard Classification of Peat Samples by Laboratory Testing |
| ASTM D 6026 : 2006 | Standard Practice for Using Significant Digits in Geotechnical Data |
| ASTM D 3740 : 1999 : REV C | Standard Practice for Minimum Requirements for Agencies Engaged in the Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction |
| ASTM D 4427 : 2013 : R2017 | Standard Classification of Peat Samples by Laboratory Testing |
| ASTM D 2974 : 2020 : EDT 1 | Standard Test Methods for Determining the Water (Moisture) Content, Ash Content, and Organic Material of Peat and Other Organic Soils |
| ASTM D 4427 : 2013 | Standard Classification of Peat Samples by Laboratory Testing |
| ASTM D 2974 : 2000 | Standard Test Methods for Moisture, Ash, and Organic Matter of Peat and Other Organic Soils |
| ASTM D 4427 : 1992 : R1997 | Standard Classification of Peat Samples by Laboratory Testing |
| ASTM D 6026 : 1999 | Standard Practice for Using Significant Digits in Geotechnical Data |
| ASTM D 2974 : 2007 | Standard Test Methods for Moisture, Ash, and Organic Matter of Peat and Other Organic Soils |
| ASTM D 3740 : 2011 | Standard Practice for Minimum Requirements for Agencies Engaged in Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction |
| ASTM D 4427 : 1992 : R2002 : EDT 1 | Standard Classification of Peat Samples by Laboratory Testing |
| ASTM D 6026 : 2001 : EDT 1 | Standard Practice for Using Significant Digits in Geotechnical Data |
| ASTM D 3740 : 2010 | Standard Practice for Minimum Requirements for Agencies Engaged in Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction |
| ASTM D 6026 : 1996 | Standard Practice for Using Significant Digits in Geotechnical Data |
| ASTM D 3740 : 2004 : REV A | Standard Practice for Minimum Requirements for Agencies Engaged in the Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction |
| ASTM D 2974 : 2014 | Standard Test Methods for Moisture, Ash, and Organic Matter of Peat and Other Organic Soils |
| ASTM D 3740 : 2001 | Standard Practice for Minimum Requirements for Agencies Engaged in the Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction |
| ASTM D 2974 : 2013 | Standard Test Methods for Moisture, Ash, and Organic Matter of Peat and Other Organic Soils |
| ASTM D 4427 : 2007 | Standard Classification of Peat Samples by Laboratory Testing |
| ASTM D 3740 : 2012 : REV A | Standard Practice for Minimum Requirements for Agencies Engaged in Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction |
| ASTM D 3740 : 2003 | Standard Practice for Minimum Requirements for Agencies Engaged in the Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction |
| ASTM D 6026 : 2001 | Standard Practice for Using Significant Digits in Geotechnical Data |
| ASTM D 4427 : 2018 | Standard Classification of Peat Samples by Laboratory Testing |
| ASTM D 3740 : 2004 | Standard Practice for Minimum Requirements for Agencies Engaged in the Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.