ASTM D 2042 : 2015
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Solubility of Asphalt Materials in Trichloroethylene
Available format(s)
Hardcopy , PDF
Superseded date
28-02-2022
Superseded by
Language(s)
English
Published date
13-07-2015
Important note : Users cannot be edited or removed once added to your Multi user PDF.| Committee |
D 04
|
| DocumentType |
Test Method
|
| Pages |
3
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This test method covers the determination of the degree of solubility in trichloroethylene of asphalt materials having little or no mineral matter.
Note 1:This method is not applicable to tars and their distillation residues or highly cracked petroleum products. For methods covering tars, pitches, and other highly cracked petroleum products, and the use of other solvents, see Test Methods D4, D2318, and D2764.
1.2The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.3The text of this standard references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific precaution statements are given in Section 7.
| ASTM D 244 : 2009 : R2017 | Standard Test Methods and Practices for Emulsified Asphalts |
| ASTM D 2521/D2521M : 1976 : R2014 : EDT 1 | Standard Specification for Asphalt Used in Canal, Ditch, and Pond Lining |
| ASTM D 5505 : 2014 | Standard Practice for Classifying Emulsified Recycling Agents |
| ASTM D 3141/D3141M : 2015 | Standard Specification for Asphalt for Undersealing Portland-Cement Concrete Pavements |
| ASTM D 6154 : 2015 | Standard Specification for Chemically Modified Asphalt Cement for Use in Pavement Construction |
| ASTM D 8239 : 2018 | Standard Specification for Performance-Graded Asphalt Binder Using the Multiple Stress Creep and Recovery (MSCR) Test |
| ASTM D 2028/D2028M : 2015 | Standard Specification for Cutback Asphalt (Rapid-Curing Type) |
| ASTM A 849 : 2015 | Standard Specification for Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe |
| ASTM D 312/D312M : 2016 : REV A | Standard Specification for Asphalt Used in Roofing |
| ASTM D 6373 : 2016 | Standard Specification for Performance Graded Asphalt Binder |
| ASTM D 3381/D3381M : 2018 | Standard Specification for Viscosity-Graded Asphalt Binder for Use in Pavement Construction |
| ASTM D 2027/D2027M : 2013 | Standard Specification for Cutback Asphalt (Medium-Curing Type) |
| ASTM D 2397/D2397M : 2019 | Standard Specification for Cationic Emulsified Asphalt |
| ASTM D 946/D946M : 2015 | Standard Specification for Penetration-Graded Asphalt Binder for Use in Pavement Construction |
| ASTM D 2026/D2026M : 2015 | Standard Specification for Cutback Asphalt (Slow-Curing Type) |
| ASTM D 8125 : 2018 | Standard Specification for Re-Refined Engine Oil Bottoms (REOB)/Vacuum Tower Asphalt Extender (VTAE) |
| ASTM D 7553 : 2015 | Standard Test Method for Solubility of Asphalt Materials in N-Propyl Bromide |
| ASTM D 8051/D8051M : 2016 | Standard Specification for Wax-Modified Asphalt Used in Roofing |
| ASTM D 449/D449M : 2003 : R2014 : EDT 1 | Standard Specification for Asphalt Used in Dampproofing and Waterproofing |
| ASTM D 977 : 2019 | Standard Specification for Emulsified Asphalt |
| ASTM D 5505 : 2014 : R2020 | Standard Practice for Classifying Emulsified Recycling Agents |
| ASTM D 6154 : 2015 : R2021 : EDT 1 | Standard Specification for Chemically Modified Asphalt Cement for Use in Pavement Construction |
| ASTM D 2397/D2397M : 2020 | Standard Specification for Cationic Emulsified Asphalt |
| ASTM D 946/D946M : 2020 | Standard Specification for Penetration-Graded Asphalt Binder for Use in Pavement Construction |
| ASTM D 2026/D2026M : 2015 : R2021 : EDT 1 | Standard Specification for Cutback Asphalt (Slow-Curing Type) |
| ASTM D 6373 : 2021 : REV A | Standard Specification for Performance-Graded Asphalt Binder |
| ASTM D 977 : 2020 | Standard Specification for Emulsified Asphalt |
| ASTM D 8239 : 2021 : REV A | Standard Specification for Performance-Graded Asphalt Binder Using the Multiple Stress Creep and Recovery (MSCR) Test |
| ASTM D 3141/D3141M : 2021 | Standard Specification for Asphalt for Undersealing Portland-Cement Concrete Pavements |
| ASTM D 2027/D2027M : 2019 | Standard Specification for Cutback Asphalt (Medium-Curing Type) |
| ASTM D 449/D449M : 2003 : R2021 | Standard Specification for Asphalt Used in Dampproofing and Waterproofing |
| ASTM A 849 : 2015 : R2021 | Standard Specification for Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe |
| ASTM D 2521/D2521M : 1976 : R2021 | Standard Specification for Asphalt Used in Canal, Ditch, and Pond Lining |
| ASTM D 6152/D6152M : 2012 : R2018 | Standard Specification for SEBS-Modified Mopping Asphalt Used in Roofing |
| ASTM D 7553 : 2015 : R2021 | Standard Test Method for Solubility of Asphalt Materials in N-Propyl Bromide |
| ASTM D 7654/D7654M : 2010 : R2018 | Standard Specification for Asphalt Used in Roofing Measured by Dynamic Shear Rheometer |
| ASTM D 2028/D2028M : 2015 : R2021 : EDT 1 | Standard Specification for Cutback Asphalt (Rapid-Curing Type) |
| ASTM D 3666 : 2013 | Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials |
| ASTM D 2318 : 1998 : R2003 | Standard Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch |
| ASTM D 3666 : 2011 | Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials |
| ASTM D 2318 : 1998 : R2013 | Standard Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch |
| ASTM D 3666 : 2007 : REV A | Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials |
| ASTM D 2318 : 2014 | Standard Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch |
| ASTM D 3666 : 2009 : REV A | Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials |
| ASTM D 2764 : 1999 : R2009 | Standard Test Method for Dimethylformamide-Insoluble (DMF-I) Content of Tar and Pitch |
| ASTM D 2318 : 1998 | Standard Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch |
| ASTM D 2764 : 1999 : R2015 : EDT 1 | Standard Test Method for Dimethylformamide-Insoluble (DMF-I) Content of Tar and Pitch |
| ASTM D 3666 : 2005 | Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials |
| ASTM D 3666 : 2003 : REV A | Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials |
| ASTM D 3666 : 2000 | Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials |
| ASTM D 2318 : 1998 : R2008 | Standard Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch |
| ASTM D 3666 : 2007 | Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials |
| ASTM D 3666 : 2007 : EDT 2 | Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials |
| ASTM D 3666 : 2016 | Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials |
| ASTM D 2764 : 1999 | Standard Test Method for Dimethylformamide-Insoluble (DMF-I) Content of Tar and Pitch |
| ASTM D 3666 : 2003 | Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials |
| ASTM D 2764 : 2020 | Standard Test Method for Dimethylformamide-Insoluble (DMF-I) Content of Tar and Pitch |
| ASTM D 2318 : 2015 | Standard Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch |
| ASTM D 3666 : 2001 | Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials |
| ASTM D 2318 : 2020 | Standard Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch |
| ASTM D 3666 : 2006 | Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials |
| ASTM D 2318 : 2014 : EDT 1 | Standard Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch |
| ASTM D 3666 : 2004 | Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials |
| ASTM D 2764 : 1999 : R2004 : EDT 1 | Standard Test Method for Dimethylformamide-Insoluble (DMF-I) Content of Tar and Pitch |
| ASTM D 3666 : 2005 : REV A | Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials |
| ASTM D 3666 : 2007 : REV A : EDT 1 | Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials |
| ASTM D 3666 : 2009 | Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials |
| ASTM D 3666 : 2002 | Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.