ASTM D 2158 : 2016 : REV A : EDT 1
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Residues in Liquefied Petroleum (LP) Gases
Hardcopy , PDF
13-08-2021
English
22-02-2018
Committee |
D 02
|
DocumentType |
Test Method
|
Pages |
6
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This test method covers the determination of extraneous materials weathering above 38 °C that are present in liquefied petroleum gases. The extraneous materials will generally be dissolved in the LPG, but may have phase-separated in some instances.
1.2Liquefied petroleum gases that contain certain anti-icing additives can give erroneous results by this test method.
1.3Although this test method has been used to verify cleanliness and lack of heavy contaminants in propane for many years, it might not be sensitive enough to protect some equipment from operational problems or increased maintenance. A more sensitive test, able to detect lower levels of dissolved contaminants, could be required for some applications.
1.4The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.6This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM D 7756 : 2019 | Standard Test Method for Residues in Liquefied Petroleum (LP) Gases by Gas Chromatography with Liquid, On-Column Injection |
ASTM D 7828 : 2012 | Standard Test Method for Determination of Residue Composition in Liquefied Petroleum Gas (LPG) Using Automated Thermal Desorption/Gas Chromatography (ATD/GC) (Withdrawn 2021) |
ASTM D 1835 : 2018 : REV A | Standard Specification for Liquefied Petroleum (LP) Gases |
ASTM D 2598 : 2016 | Standard Practice for Calculation of Certain Physical Properties of Liquefied Petroleum (LP) Gases from Compositional Analysis |
ASTM D 7901 : 2014 : REV B | Standard Specification for Dimethyl Ether for Fuel Purposes |
ASTM D 7901 : 2020 | Standard Specification for Dimethyl Ether for Fuel Purposes |
ASTM D 2598 : 2021 | Standard Practice for Calculation of Certain Physical Properties of Liquefied Petroleum (LP) Gases from Compositional Analysis |
ASTM E 2877 : 2012 : EDT 1 | Standard Guide for Digital Contact Thermometers |
ASTM D 1796 : 2011 | Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure) |
ASTM D 1835 : 1997 | Standard Specification for Liquefied Petroleum (LP) Gases |
ASTM E 2251 : 2007 | Standard Specification for Liquid-in-Glass ASTM Thermometers with Low-Hazard Precision Liquids |
ASTM E 2251 : 2003 : REV A | Standard Specification for Liquid-in-Glass ASTM Thermometers with Low-Hazard Precision Liquids |
ASTM D 1835 : 2018 : REV A | Standard Specification for Liquefied Petroleum (LP) Gases |
ASTM D 1835 : 2012 | Standard Specification for Liquefied Petroleum (LP) Gases |
ASTM D 1796 : 2004 : R2009 | Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure) |
ASTM E 2251 : 2003 | Standard Specification for Liquid-in-Glass ASTM Thermometers with Low-Hazard Precision Liquids |
ASTM D 1796 : 1997 | Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure) |
ASTM D 1835 : 2003 : REV A | Standard Specification for Liquefied Petroleum (LP) Gases |
ASTM E 2251 : 2010 | Standard Specification for Liquid-in-Glass ASTM Thermometers with Low-Hazard Precision Liquids |
ASTM D 1796 : 1997 : EDT 1 | Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure) |
ASTM E 2251 : 2011 | Standard Specification for Liquid-in-Glass ASTM Thermometers with Low-Hazard Precision Liquids |
ASTM E 2877 : 2012 : R2019 | Standard Guide for Digital Contact Thermometers |
ASTM E 2251 : 2014 | Standard Specification for Liquid-in-Glass ASTM Thermometers with Low-Hazard Precision Liquids |
ASTM D 1835 : 2003 | Standard Specification for Liquefied Petroleum (LP) Gases |
ASTM D 1835 : 2013 | Standard Specification for Liquefied Petroleum (LP) Gases |
ASTM D 1835 : 2020 | Standard Specification for Liquefied Petroleum (LP) Gases |
ASTM D 1835 : 2018 | Standard Specification for Liquefied Petroleum (LP) Gases |
ASTM E 2877 : 2012 | Standard Guide for Standard Guide for Digital Contact Thermometers |
ASTM D 1835 : 2016 | Standard Specification for Liquefied Petroleum (LP) Gases |
ASTM D 1796 : 2011 : R2016 | Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure) |
ASTM D 1835 : 2011 | Standard Specification for Liquefied Petroleum (LP) Gases |
ASTM D 1796 : 1997 : R2002 | Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure) |
ASTM D 1796 : 2004 | Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure) |
ASTM D 1796 : 2011 : EDT 1 | Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure) |
ASTM D 1796 : 1983 : R1990 : EDT 1 | Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure) |
ASTM E 1137 : 1997 | Standard Specification for Industrial Platinum Resistance Thermometers |
ASTM D 1835 : 2005 | Standard Specification for Liquefied Petroleum (LP) Gases |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.