ASTM D 2187 : 2017
Current
The latest, up-to-date edition.
Standard Test Methods and Practices for Evaluating Physical and Chemical Properties of Particulate Ion-Exchange Resins
Hardcopy , PDF
English
01-08-2017
Committee |
D 19
|
DocumentType |
Test Method
|
Pages |
21
|
PublisherName |
American Society for Testing and Materials
|
Status |
Current
|
Supersedes |
1.1These test methods cover the determination of the physical and chemical properties of ion-exchange resins when used for the treatment of water. They are intended for use in testing both new and used materials. The following thirteen test methods are included:
Sections | |
Test Practice A—Pretreatment | 6 – 10 |
Test Method B—Water Retention Capacity | 11 – 18 |
Test Method C—Backwashed and Settled Density | 19 – 26 |
Test Method D—Particle Size Distribution | 27 – 35 |
Test Method E—Salt-Splitting Capacity of Cation-Exchange Resins | 36 – 45 |
Test Method F—Total Capacity of Cation-Exchange Resins | 46 – 55 |
Test Method G—Percent Regeneration of Hydrogen-Form Cation-Exchange Resins | 56 – 64 |
Test Method H—Total and Salt-Splitting Capacity of Anion-Exchange Resins | 65 – 73 |
Test Practice I—Percent Regeneration of Anion Exchange Resins | 74 – 82 |
Test Practice J—Ionic Chloride Content of Anion-Exchange Resins | 83 – 90 |
Test Method K—Carbonate Content of Anion-Exchange Resins | 91 – 99 |
Test Method L—Sulfate Content of Anion Exchange Resins | 100 – 108 |
Test Practice M—Total Anion Capacity of Anion-Exchange Resins | 109 – 117 |
1.2The values stated in SI units are to be regarded as standard. The values given in parentheses are mathematical conversions to inch-pound units that are provided for information only and are not considered standard.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health and environmental practices and determine the applicability of regulatory limitations prior to use. Specific precautionary statements are given in Section 10.8.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM D 5217 : 2017 | Standard Guide for Detection of Fouling and Degradation of Particulate Ion Exchange Materials |
ASTM D 4548 : 2011 | Standard Test Method for Anion-Cation Balance of Mixed Bed Ion-Exchange Resins |
ASTM D 6302 : 1998 : R2017 | Standard Practice for Evaluating the Kinetic Behavior of Ion Exchange Resins |
ASTM D 5627 : 2017 | Standard Test Method for Water Extractable Residue from Particulate Ion-Exchange Resins |
ASTM E 11 : 2020 | Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves |
ASTM D 2687 : 1995 : R2016 | Standard Practices for Sampling Particulate Ion-Exchange Materials |
ASTM D 1129 : 2003 | Standard Terminology Relating to Water |
ASTM D 1129 : 2013 | Standard Terminology Relating to Water |
ASTM D 1129 : 2013 : R2020 | Standard Terminology Relating to Water |
ASTM D 2777 : 2012 | Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water |
ASTM E 11 : 2024 | Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves |
ASTM D 1129 : 2013 : R2020 : EDT 2 | Standard Terminology Relating to Water |
ASTM D 2687 : 1995 : R2024 | Standard Practices for Sampling Particulate Ion-Exchange Materials |
ASTM D 1193 : 1977 : R1983 : EDT 1 | Standard Specification for Reagent Water |
ASTM D 1129 : 2006 | Standard Terminology Relating to Water |
ASTM D 2777 : 2003 | Standard Practice for Determination of Precision and Bias of Applicable Methods of Committee D-19 on Water |
ASTM D 2777 : 2021 | Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water |
ASTM D 2777 : 2013 | Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water |
ASTM D 2777 : 1998 | Standard Practice for Determination of Precision and Bias of Applicable Methods of Committee D-19 on Water |
ASTM D 1129 : 2013 : R2020 : EDT 1 | Standard Terminology Relating to Water |
ASTM D 1129 : 1999 : REV A | Standard Terminology Relating to Water |
ASTM E 11 : 2022 | Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves |
ASTM D 1129 : 2006 : REV A | Standard Terminology Relating to Water |
ASTM D 1193 : 2006 : R2011 | Standard Specification for Reagent Water |
ASTM D 2687 : 1995 : R2001 | Standard Practices for Sampling Particulate Ion-Exchange Materials |
ASTM D 1129 : 2003 : REV A | Standard Terminology Relating to Water |
ASTM D 1129 : 2002 | Standard Terminology Relating to Water |
ASTM D 1293 : 1999 | Standard Test Methods for pH of Water |
ASTM D 1193 : 1991 | Standard Specification for Reagent Water |
ASTM D 1293 : 1999 : R2005 | Standard Test Methods for pH of Water |
ASTM D 1129 : 2004 | Standard Terminology Relating to Water |
ASTM D 2777 : 2008 | Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water |
ASTM D 1293 : 2018 | Standard Test Methods for pH of Water |
ASTM D 2777 : 2006 | Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water |
ASTM D 1129 : 2002 : REV A | Standard Terminology Relating to Water |
ASTM D 1193 : 1970 | Standard Specification For Reagent Water |
ASTM D 1193 : 2006 | Standard Specification for Reagent Water |
ASTM D 1293 : 2012 | Standard Test Methods for pH of Water |
ASTM D 1193 : 1999 | Standard Specification for Reagent Water |
ASTM D 1129 : 2010 | Standard Terminology Relating to Water |
ASTM D 1129 : 2006 : REV A : EDT 1 | Standard Terminology Relating to Water |
ASTM D 1129 : 2001 | Standard Terminology Relating to Water |
ASTM D 1129 : 2004 : EDT 1 | Standard Terminology Relating to Water |
ASTM D 1193 : 2006 : R2018 | Standard Specification for Reagent Water |
ASTM D 2777 : 2008 : EDT 1 | Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water |
ASTM D 1293 : 1984 : R1990 | Standard Test Methods for pH of Water |
ASTM D 2687 : 1995 : R2007 : EDT 1 | Standard Practices for Sampling Particulate Ion-Exchange Materials |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.