• Shopping Cart
    There are no items in your cart

ASTM D 2570 : 2016

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

Standard Test Method for Simulated Service Corrosion Testing of Engine Coolants

Available format(s)

Hardcopy , PDF

Superseded date

03-10-2024

Superseded by

ASTM D 2570 : 2024

Language(s)

English

Published date

01-04-2016

€67.30
Excluding VAT

1.1 This test method evaluates the effect of a circulating engine coolant on metal test specimens and automotive cooling system components under controlled, essentially isothermal laboratory conditions.

Committee
D 15
DocumentType
Test Method
Pages
7
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

1.1This test method evaluates the effect of a circulating engine coolant on metal test specimens and automotive cooling system components under controlled, essentially isothermal laboratory conditions.

1.2This test method specifies test material, cooling system components, type of coolant, and coolant flow conditions that are considered typical of current automotive use.

1.3The values stated in foot-pound-second units are to be regarded as the standard. The values given in parentheses (SI units) are approximate equivalents for information only.

1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific precautionary statements are given in Section 6.

ASTM D 7518 : 2010 : R2015 : EDT 1 Standard Specification for 1,3 Propanediol (PDO) Base Engine Coolant for Automobile and Light-Duty Service
ASTM D 3306 : 2019 Standard Specification for Glycol Base Engine Coolant for Automobile and Light-Duty Service
ASTM G 162 : 2018 Standard Practice for Conducting and Evaluating Laboratory Corrosion Tests in Soils
ASTM D 5752 : 2010 : R2017 Standard Specification for Supplemental Coolant Additives (SCAs) for Use in Precharging Coolants for Heavy-Duty Engines
ASTM D 7714 : 2011 : R2016 : EDT 1 Standard Specification for Glycerin Base Engine Coolant for Automobile and Light-Duty Service
ASTM D 4985 : 2010 : R2015 Standard Specification for Low Silicate Ethylene Glycol Base Engine Coolant for Heavy Duty Engines Requiring a Pre-Charge of Supplemental Coolant Additive (SCA)
ASTM D 7518 : 2020 Standard Specification for 1,3 Propanediol (PDO) Base Engine Coolant for Automobile and Light-Duty Service
ASTM D 7714 : 2011 : R2021 Standard Specification for Glycerin Base Engine Coolant for Automobile and Light-Duty Service
ASTM G 162 : 2023 Standard Practice for Conducting and Evaluating Laboratory Corrosion Tests in Soils
ASTM D 8034/D8034M : 2024 Standard Test Method for Simulated Service Corrosion Testing of Non-Aqueous Engine Coolants

ASTM D 3306 : 2014 Standard Specification for Glycol Base Engine Coolant for Automobile and Light-Duty Service
ASTM D 1287 : 2011 : R2020 Standard Test Method for pH of Engine Coolants and Antirusts
ASTM D 1384 : 2001 Standard Test Method for Corrosion Test for Engine Coolants in Glassware
ASTM D 1384 : 2024 Standard Test Method for Corrosion Test for Engine Coolants in Glassware
ASTM D 1287 : 1991 : R1997 : EDT 1 Standard Test Method for pH of Engine Coolants and Antirusts
ASTM D 1287 : 2009 Standard Test Method for pH of Engine Coolants and Antirusts
ASTM D 1176 : 1998 : R2008 Standard Practice for Sampling and Preparing Aqueous Solutions of Engine Coolants or Antirusts for Testing Purposes
ASTM D 4985 : 2010 : R2023 Standard Specification for Low Silicate Ethylene Glycol Base Engine Coolant for Heavy Duty Engines Requiring a Pre-Charge of Supplemental Coolant Additive (SCA)
ASTM D 1193 : 1977 : R1983 : EDT 1 Standard Specification for Reagent Water
ASTM D 1287 : 2011 Standard Test Method for pH of Engine Coolants and Antirusts
ASTM D 1121 : 2007 Standard Test Method for Reserve Alkalinity of Engine Coolants and Antirusts
ASTM D 3306 : 2003 Standard Specification for Glycol Base Engine Coolant for Automobile and Light-Duty Service
ASTM D 3306 : 2009 Standard Specification for Glycol Base Engine Coolant for Automobile and Light-Duty Service
ASTM D 1176 : 1998 : R2002 Standard Practice for Sampling and Preparing Aqueous Solutions of Engine Coolants or Antirusts for Testing Purposes
ASTM D 1121 : 2011 : R2020 Standard Test Method for Reserve Alkalinity of Engine Coolants and Antirusts
ASTM D 2847 : 1999 Standard Practice for Testing Engine Coolants in Car and Light Truck Service
ASTM D 1121 : 1967 Standard Method Of Test For Reserve Alkalinity Of Engine Antifreezes And Antirusts
ASTM D 4985 : 2003 Standard Specification for Low Silicate Ethylene Glycol Base Engine Coolant for Heavy Duty Engines Requiring a Pre-Charge of Supplemental Coolant Additive (SCA)
ASTM D 3306 : 2021 Standard Specification for Glycol Base Engine Coolant for Automobile and Light-Duty Service
ASTM D 1384 : 2005 : EDT 1 Standard Test Method for Corrosion Test for Engine Coolants in Glassware
ASTM D 4985 : 2005 Standard Specification for Low Silicate Ethylene Glycol Base Engine Coolant for Heavy Duty Engines Requiring a Pre-Charge of Supplemental Coolant Additive (SCA)
ASTM D 3306 : 2010 Standard Specification for Glycol Base Engine Coolant for Automobile and Light-Duty Service
ASTM D 1193 : 2006 : R2011 Standard Specification for Reagent Water
ASTM D 4985 : 2010 Standard Specification for Low Silicate Ethylene Glycol Base Engine Coolant for Heavy Duty Engines Requiring a Pre-Charge of Supplemental Coolant Additive (SCA)
ASTM D 2758 : 1994 : R2009 Standard Test Method for Engine Coolants by Engine Dynamometer (Withdrawn 2022)
ASTM D 2847 : 2007 : R2012 Standard Practice for Testing Engine Coolants in Car and Light Truck Service
ASTM D 3306 : 2008 : REV A Standard Specification for Glycol Base Engine Coolant for Automobile and Light-Duty Service
ASTM D 1193 : 1991 Standard Specification for Reagent Water
ASTM D 1176 : 1998 Standard Practice for Sampling and Preparing Aqueous Solutions of Engine Coolants or Antirusts for Testing Purposes
ASTM D 2847 : 2015 Standard Practice for Testing Engine Coolants in Car and Light Truck Service
ASTM D 4985 : 2009 Standard Specification for Low Silicate Ethylene Glycol Base Engine Coolant for Heavy Duty Engines Requiring a Pre-Charge of Supplemental Coolant Additive (SCA)
ASTM D 3306 : 2001 Standard Specification for Glycol Base Engine Coolant for Automobile and Light-Duty Service
ASTM D 1121 : 2011 Standard Test Method for Reserve Alkalinity of Engine Coolants and Antirusts
ASTM D 1384 : 1997 : REV A Standard Test Method for Corrosion Test for Engine Coolants in Glassware
ASTM D 1287 : 1991 : R2002 Standard Test Method for pH of Engine Coolants and Antirusts
ASTM D 1384 : 2004 Standard Test Method for Corrosion Test for Engine Coolants in Glassware
ASTM D 1121 : 1998 Standard Test Method for Reserve Alkalinity of Engine Coolants and Antirusts
ASTM D 1384 : 2005 : R2019 Standard Test Method for Corrosion Test for Engine Coolants in Glassware
ASTM D 2847 : 2022 Standard Practice for Testing Engine Coolants in Car and Light Truck Service
ASTM D 2847 : 2014 Standard Practice for Testing Engine Coolants in Car and Light Truck Service
ASTM D 2758 : 1994 : R1998 : EDT 1 Standard Test Method for Engine Coolants by Engine Dynamometer
ASTM D 1176 : 2014 : R2019 Standard Practice for Sampling and Preparing Aqueous Solutions of Engine Coolants or Antirusts for Testing Purposes
ASTM D 3306 : 2005 Standard Specification for Glycol Base Engine Coolant for Automobile and Light-Duty Service
ASTM D 1176 : 2014 Standard Practice for Sampling and Preparing Aqueous Solutions of Engine Coolants or Antirusts for Testing Purposes
ASTM D 1193 : 1970 Standard Specification For Reagent Water
ASTM D 1384 : 2005 : R2012 Standard Test Method for Corrosion Test for Engine Coolants in Glassware
ASTM D 1193 : 2006 Standard Specification for Reagent Water
ASTM D 1193 : 1999 Standard Specification for Reagent Water
ASTM D 3306 : 2019 Standard Specification for Glycol Base Engine Coolant for Automobile and Light-Duty Service
ASTM D 4985 : 2000 : REV A Standard Specification for Low Silicate Ethylene Glycol Base Engine Coolant for Heavy Duty Engines Requiring a Pre-Charge of Supplemental Coolant Additive (SCA)
ASTM D 3306 : 2000 : REV A Standard Specification for Glycol Base Engine Coolant for Automobile and Light-Duty Service
ASTM D 1384 : 2005 Standard Test Method for Corrosion Test for Engine Coolants in Glassware
ASTM D 2847 : 2007 Standard Practice for Testing Engine Coolants in Car and Light Truck Service
ASTM D 1193 : 2006 : R2018 Standard Specification for Reagent Water
ASTM D 3306 : 2008 Standard Specification for Glycol Base Engine Coolant for Automobile and Light-Duty Service
ASTM D 2758 : 1994 : R2003 Standard Test Method for Engine Coolants by Engine Dynamometer
ASTM D 3306 : 2011 Standard Specification for Glycol Base Engine Coolant for Automobile and Light-Duty Service
ASTM D 4985 : 2010 : R2015 Standard Specification for Low Silicate Ethylene Glycol Base Engine Coolant for Heavy Duty Engines Requiring a Pre-Charge of Supplemental Coolant Additive (SCA)

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.