ASTM D 2598 : 2016
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practice for Calculation of Certain Physical Properties of Liquefied Petroleum (LP) Gases from Compositional Analysis
Hardcopy , PDF
13-05-2021
English
14-10-2016
This practice covers, by compositional analysis, the approximate determination of the following physical characteristics of commercial propane, special-duty propane, commercial propane/butane mixtures, and commercial butane (covered by Specification D1835): vapor pressure, relative density, and motor octane number (MON).
Committee |
D 02
|
DocumentType |
Standard Practice
|
Pages |
3
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This practice covers, by compositional analysis, the approximate determination of the following physical characteristics of commercial propane, special-duty propane, commercial propane/butane mixtures, and commercial butane (covered by Specification D1835): vapor pressure, relative density, and motor octane number (MON).
1.1.1This practice is not applicable to any product exceeding specifications for nonvolatile residues. (See Test Method D2158.)
1.1.2For calculating motor octane number, this practice is applicable only to mixtures containing 20 % or less of propene.
1.1.3For calculated motor octane number, this practice is based on mixtures containing only components shown in Table 1.
1.2The values stated in SI units are to be regarded as standard.
1.2.1Exceptions:
1.2.1.1Non-SI units in parentheses are given for information only.
1.2.1.2Motor octane number and relative density are given in MON numbers and dimensionless units, respectively.
ASTM F 400 : 2020 | Standard Consumer Safety Specification for Lighters |
ASTM F 2201 : 2020 | Standard Consumer Safety Specification for Utility Lighters |
ASTM F 400 : 2019 | Standard Consumer Safety Specification for Lighters |
ASTM D 2163 : 2014 : R2019 | Standard Test Method for Determination of Hydrocarbons in Liquefied Petroleum (LP) Gases and Propane/Propene Mixtures by Gas Chromatography |
ASTM F 2201 : 2019 | Standard Consumer Safety Specification for Utility Lighters |
ASTM D 7756 : 2019 | Standard Test Method for Residues in Liquefied Petroleum (LP) Gases by Gas Chromatography with Liquid, On-Column Injection |
ASTM D 1835 : 2018 : REV A | Standard Specification for Liquefied Petroleum (LP) Gases |
ASTM D 2158 : 2005 | Standard Test Method for Residues in Liquefied Petroleum (LP) Gases |
ASTM D 1657 : 1989 | Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Thermohydrometer (Withdrawn 1998) |
ASTM D 2421 : 2002 : R2007 | Standard Practice for Interconversion of Analysis of C<i><inf>5</inf></i> and Lighter Hydrocarbons to Gas-Volume, Liquid-Volume, or Mass Basis |
ASTM D 2158 : 2016 | Standard Test Method for Residues in Liquefied Petroleum (LP) Gases |
ASTM D 1657 : 2002 : R2007 | Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer |
ASTM D 1267 : 2002 : R2007 | Standard Test Method for Gage Vapor Pressure of Liquefied Petroleum (LP) Gases (LP-Gas Method) |
ASTM D 1835 : 1997 | Standard Specification for Liquefied Petroleum (LP) Gases |
ASTM D 2421 : 1995 | Standard Practice for Interconversion of Analysis of C<sub>5</sub> and Lighter Hydrocarbons to Gas-Volume, Liquid-Volume, or Weight Basis |
ASTM D 2158 : 2004 | Standard Test Method for Residues in Liquefied Petroleum (LP) Gases |
ASTM D 2163 : 2014 : EDT 1 | Standard Test Method for Determination of Hydrocarbons in Liquefied Petroleum (LP) Gases and Propane/Propene Mixtures by Gas Chromatography |
ASTM D 2163 : 2007 | Standard Test Method for Determination of Hydrocarbons in Liquefied Petroleum (LP) Gases and Propane/Propene Mixtures by Gas Chromatography |
ASTM D 2158 : 2011 | Standard Test Method for Residues in Liquefied Petroleum (LP) Gases |
ASTM D 2421 : 2018 | Standard Practice for Interconversion of Analysis of C<emph type="ital"><inf>5</inf ></emph> and Lighter Hydrocarbons to Gas-Volume, Liquid-Volume, or Mass Basis |
ASTM D 2158 : 1989 | Standard Test Method for Residues in Liquefied Petroleum (LP) Gases |
ASTM D 1835 : 2018 : REV A | Standard Specification for Liquefied Petroleum (LP) Gases |
ASTM D 1835 : 2012 | Standard Specification for Liquefied Petroleum (LP) Gases |
ASTM D 2421 : 2001 | Standard Practice for Interconversion of Analysis of C<sub>5</sub> and Lighter Hydrocarbons to Gas-Volume, Liquid-Volume, or Weight Basis |
ASTM D 2421 : 2002 | Standard Practice for Interconversion of Analysis of C<sub>5</sub> and Lighter Hydrocarbons to Gas-Volume, Liquid-Volume, or Weight Basis |
ASTM D 1267 : 2002 | Standard Test Method for Gage Vapor Pressure of Liquefied Petroleum (LP) Gases (LP-Gas Method) |
ASTM D 1267 : 2012 | Standard Test Method for Gage Vapor Pressure of Liquefied Petroleum (LP) Gases (LP-Gas Method) |
ASTM D 1835 : 2003 : REV A | Standard Specification for Liquefied Petroleum (LP) Gases |
ASTM D 1267 : 2018 | Standard Test Method for Gauge Vapor Pressure of Liquefied Petroleum (LP) Gases (LP-Gas Method) |
ASTM D 1835 : 2003 | Standard Specification for Liquefied Petroleum (LP) Gases |
ASTM D 1657 : 2012 : R2017 | Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer |
ASTM D 1835 : 2013 | Standard Specification for Liquefied Petroleum (LP) Gases |
ASTM D 2421 : 2013 | Standard Practice for Interconversion of Analysis of C<emph type="ital"><inf>5</inf ></emph> and Lighter Hydrocarbons to Gas-Volume, Liquid-Volume, or Mass Basis |
ASTM D 1835 : 2020 | Standard Specification for Liquefied Petroleum (LP) Gases |
ASTM D 1835 : 2018 | Standard Specification for Liquefied Petroleum (LP) Gases |
ASTM D 2158 : 2002 | Standard Test Method for Residues in Liquefied Petroleum (LP) Gases |
ASTM D 2158 : 2016 : REV A | Standard Test Method for Residues in Liquefied Petroleum (LP) Gases |
ASTM D 2163 : 1991 : R1996 | Standard Test Method for Analysis of Liquefied Petroleum (LP) Gases and Propene Concentrates by Gas Chromatography (Withdrawn 2005) |
ASTM D 1267 : 1995 | Standard Test Method for Gage Vapor Pressure of Liquefied Petroleum (LP) Gases (LP-Gas Method) |
ASTM D 1835 : 2016 | Standard Specification for Liquefied Petroleum (LP) Gases |
ASTM D 2158 : 1997 : EDT 1 | Standard Test Method for Residues in Liquefied Petroleum (LP) Gases |
ASTM D 1835 : 2011 | Standard Specification for Liquefied Petroleum (LP) Gases |
ASTM D 2158 : 2016 : REV A : EDT 1 | Standard Test Method for Residues in Liquefied Petroleum (LP) Gases |
ASTM D 2163 : 2014 | Standard Test Method for Determination of Hydrocarbons in Liquefied Petroleum (LP) Gases and Propane/Propene Mixtures by Gas Chromatography |
ASTM D 2163 : 2014 : R2019 | Standard Test Method for Determination of Hydrocarbons in Liquefied Petroleum (LP) Gases and Propane/Propene Mixtures by Gas Chromatography |
ASTM D 1657 : 2012 | Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer |
ASTM D 1657 : 2012 : EDT 1 | Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer |
ASTM D 1657 : 2002 | Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer |
ASTM D 1835 : 2005 | Standard Specification for Liquefied Petroleum (LP) Gases |
ASTM D 2421 : 2019 | Standard Practice for Interconversion of Analysis of C<emph type="ital"><inf>5</inf ></emph> and Lighter Hydrocarbons to Gas-Volume, Liquid-Volume, or Mass Basis |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.