• Shopping Cart
    There are no items in your cart

ASTM D 276 : 2012

Withdrawn

Withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

Standard Test Methods for Identification of Fibers in Textiles (Withdrawn 2021)

Available format(s)

Hardcopy , PDF

Withdrawn date

22-01-2021

Language(s)

English

Published date

16-03-2012

€74.48
Excluding VAT

1.1 These test methods cover the identification of the following textile fibers used commercially in the United States.

Committee
D 13
DocumentType
Test Method
Pages
14
PublisherName
American Society for Testing and Materials
Status
Withdrawn
Supersedes

1.1 These test methods cover the identification of the following textile fibers used commercially in the United States:

Acetate (secondary)Nylon
Acrylic Nytril
Anidex Olefin
Aramid Polycarbonate
AsbestosPolyester
Cotton Ramie
Cuprammonium rayonRayon (viscose)
Flax Saran
FluorocarbonSilk
Glass Spandex
Hemp Triacetate
Jute Vinal
LycocellVinyon
ModacrylicWool
Novoloid

1.2 Man-made fibers are listed in 1.1 under the generic names approved by the Federal Trade Commission and listed in Terminology D123, Annex A1 (except for fluorocarbon and polycarbonate). Many of the generic classes of man-made fibers are produced by several manufacturers and sold under various trademark names as follows (Note 1):

Acetate Acele®, Aviscon®, Celanese®, Chromspun®, Estron®
Acrylic Acrilan®, Courtelle®, Creslan®, Dralon®, Orlon®, Zefran®
Anidex Anim/8®
Aramid Kevlar®, Nomex®, Technora®, TeijinConex®, Twaron®
CuprammoniumBemberg®
FluorocarbonTeflon®
Glass Fiberglas®, Garan®, Modiglass®, PPG®, Ultrastrand®
Lyocell Tencel®
ModacrylicDynel®, Kanecaron®, Monsanto SEF®, Verel®
NovoloidKynol®
Polyamide
(Nylon) 6Caprolan®,Enka®, Perlon®, Zefran®, Enkalon®
Polyamide
(Nylon) 6, 6Antron®, Blue C®, Cantrece®, Celanese Phillips®, Enka®Nylon
Polyamide
(Nylon) (other)Rilsan®(nylon 11), Qiana®, StanylEnka®,(Nylon 4,6)
Nytril Darvan®
Olefin Durel®, Herculon®, Marvess®, Polycrest®
PolyesterAvlin®, Beaunit®, Blue C®, Dacron®, Encron®, Fortrel®, Kodel®, Quintess®, Spectran®, Trevira®, Vyoron®, Zephran®, Diolen®, Vectran®
Rayon Avril®, Avisco®, Dynacor®, Enka®, Fiber 700®, Fibro®, Nupron®, Rayflex®, Suprenka®, Tyrex®, Tyron®, Cordenka®
Saran Enjay®, Saran®
Spandex Glospun®, Lycra®, Numa®, Unel®
TriacetateArnel®
Vinyon Avisco®, Clevyl®, Rhovyl®, Thermovyl®, Volpex®

Note 1—The list of trademarks in 1.2 contains only examples and does not include all brands produced in the United States or abroad and imported for sale in the United States. The list does not include examples of fibers from two (or more) generic classes of polymers spun into a single filament. Additional information on fiber types and trademarks is given in Refs (1, 2, and 3).

1.3 Most manufacturers offer a variety of fiber types of a specific generic class. Differences in tenacity, linear density, bulkiness, or the presence of inert delustrants normally do not interfere with analytic tests, but chemical modifications (for such purposes as increased dyeability with certain dyestuffs) may affect the infrared spectra and some of the physical properties, particularly the melting point. Many generic classes of fibers are sold with a variety of cross-section shapes designed for specific purposes. These differences will be evident upon microscopical examination of the fiber and may interfere with the measurements of refractive indices and birefringence.

1.4 Microscopical examination is indispensable for positive identification of the several types of cellulosic and animal fibers, because the infrared spectra and solubilities will not distinguish between species. Procedures for microscopic identification are published in AATCC Method 20 and in References (4-12).

1.5 Analyses by infrared spectroscopy and solubility relationships are the preferred methods for identifying man-made fibers. The analysis scheme based on solubility is very reliable. The infrared technique is a useful adjunct to the solubility test method. The other methods, especially microscopical examination are generally not suitable for positive identification of most man-made fibers and are useful primarily to support solubility and infrared spectra identifications.

1.6 These test methods include the following sections:

Section
Scope1
Referenced Documents2
Terminology3
Summary of Test Methods4
Significance and Use5
Sampling, Selection, Preparation and Number of Specimens6
Reference Standards7
Purity of Reagents8
Fiber Identification by
Microscopic Examination9,10
Solubility Relationships11-16
Infrared Spectroscopy17-23
Physical Properties to Confirm Identification
Density24-27
Melting Point28-33
Birefringence by Difference of 34 and 35
Refractive Indices

1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. See Note 3.

ASTM D 1217 : 2015 Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer
ASTM D 1217 : 1993 : R1998 Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer
ASTM D 1776 : 1998 : EDT 1 Standard Practice for Conditioning and Testing Textiles
ASTM D 1217 : 2020 Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer
ASTM D 1776 : 1967 : EDT 1 Standard Method Of Conditioning Textiles And Textile Products For Testing
ASTM D 1217 : 1993 : R2007 Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer
ASTM D 1776 : 2004 Standard Practice for Conditioning and Testing Textiles
ASTM D 1776 : 2008 : EDT 1 Standard Practice for Conditioning and Testing Textiles
ASTM D 1776 : 2008 Standard Practice for Conditioning and Testing Textiles
ASTM D 1217 : 2012 Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer
ASTM D 1217 : 1993 : R2003 : EDT 1 Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.