ASTM F 2759 : 2011 : REDLINE
|
Standard Guide for Assessment of the Ultra High Molecular Weight Polyethylene (UHMWPE) Used in Orthopedic and Spinal Devices |
CSA C68.5 : 2013
|
SHIELDED AND CONCENTRIC NEUTRAL POWER CABLE FOR DISTRIBUTION UTILITIES |
ASTM F 1986 : 2001 : R2006
|
Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Drinking-Water Systems |
ASTM F 2818 : 2010 : R2014 : EDT 1
|
Standard Specification for Specification for Crosslinked Polyethylene (PEX) Material Gas Pressure Pipe and Tubing |
ASTM F 2818 : 2010 : R2014
|
Standard Specification for Specification for Crosslinked Polyethylene (PEX) Material Gas Pressure Pipe and Tubing |
CSA C68.10 : 2014
|
SHIELDED POWER CABLE FOR COMMERCIAL AND INDUSTRIAL APPLICATIONS, 5-46 KV |
ASTM F 2214 : 2016 : REDLINE
|
Standard Test Method for In Situ Determination of Network Parameters of Crosslinked Ultra High Molecular Weight Polyethylene (UHMWPE) |
ASTM F 2805 : 2016 : REDLINE
|
Standard Specification for Multilayer Thermoplastic And Flexible Steel Pipe And Connections |
ASTM D 7567 : 2009
|
Standard Test Method for Determining Gel Content in Crosslinked Ethylene Plastics Using Pressurized Liquid Extraction (Withdrawn 2015) |
AWWA C904 : 2016
|
CROSSLINKED POLYETHYLENE (PEX) PRESSURE TUBING, 1/2 IN. (13 MM) THROUGH 3 IN. (76 MM), FOR WATER SERVICE |
ASTM F 2565 : 2013 : REDLINE
|
Standard Guide for Extensively Irradiation-Crosslinked Ultra-High Molecular Weight Polyethylene Fabricated Forms for Surgical Implant Applications |
ASTM D 3555 : 2007
|
Standard Specification for Track-Resistant Black Crosslinked Polyethylene Insulation for Wire and Cable, 90°C Operation |
ASTM F 1281 : 2017 : REDLINE
|
Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe |
EN 62788-1-6:2017
|
Measurement procedures for materials used in photovoltaic modules - Part 1-6: Encapsulants - Test methods for determining the degree of cure in Ethylene-Vinyl Acetate |
ASTM D 345 : 2002
|
Side bearings of the freight wagon bogies. General specifications |
NEMA WC 55 : 1992(R1999)
|
INSTRUMENTATION CABLES AND THERMOCOUPLE WIRE |
ASTM F 1986 : 2001 : R2011
|
Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Drinking-Water Systems (Withdrawn 2020) |
ASTM F 2968/F2968M : 2014
|
Standard Specification for Black Crosslinked Polyethylene (PEX) Pipe, Fittings and Joints For Gas Distribution Applications |
CEI EN 62788-1-6 : 1ED 2017
|
MEASUREMENT PROCEDURES FOR MATERIALS USED IN PHOTOVOLTAIC MODULES - PART 1-6: ENCAPSULANTS - TEST METHODS FOR DETERMINING THE DEGREE OF CURE IN ETHYLENE-VINYL ACETATE |
ASTM F 2854 : 2010
|
Standard Specification for Push-Fit Crosslinked Polyethylene (PEX) Mechanical Fittings for Crosslinked Polyethylene (PEX) Tubing |
API 15LE : 2008 : R2013
|
SPECIFICATION FOR POLYETHYLENE LINE PIPE (PE) |
ASTM F 2929 : 2017 : REDLINE
|
Standard Specification for Crosslinked Polyethylene (PEX) Tubing of 0.070 in. Wall and Fittings for Radiant Heating Systems up to 75 psig |
API 15LE CHINESE : 2008
|
SPECIFICATION FOR POLYETHYLENE LINE PIPE (PE) |
CSA B137 COMPENDIUM : 2017
|
THERMOPLASTIC PRESSURE PIPING COMPENDIUM |
ASTM F 1335 : 2004
|
Standard Specification for Pressure-Rated Composite Pipe and Fittings for Elevated Temperature Service (Withdrawn 2011) |
ASTM F 876 : 2017 : REDLINE
|
SPECIFICATION FOR CROSSLINKED POLYETHYLENE (PEX) TUBING |
ASTM D 3555 : 2007 : R2018
|
Standard Specification for Track-Resistant Black Crosslinked Polyethylene Insulation for Wire and Cable, 90 °C Operation |
CSA C448 SERIES : 2016
|
DESIGN AND INSTALLATION OF GROUND SOURCE HEAT PUMP SYSTEMS FOR COMMERCIAL AND RESIDENTIAL BUILDINGS |
BS EN 62788-1-6:2017
|
Measurement procedures for materials used in photovoltaic modules Encapsulants. Test methods for determining the degree of cure in Ethylene-Vinyl Acetate |
ASTM D 3555 : 2007 : R2013
|
Standard Specification for Track-Resistant Black Crosslinked Polyethylene Insulation for Wire and Cable, 90 °C Operation |
15/30309530 DC : 0
|
BS EN 62788-1-6 ED 1.0 - MEASUREMENT PROCEDURES FOR MATERIALS USED IN PHOTOVOLTAIC MODULES - PART 1-6: ENCAPSULANTS - TEST METHODS FOR DETERMINING THE DEGREE OF CURE IN ETHYLENE-VINYL ACETATE ENCAPSULATION FOR PHOTOVOLTAIC MODULES |
ASTM F 3203 : 2016
|
Standard Test Method for Determination of Gel Content of Crosslinked Polyethylene (PEX) Pipes and Tubing |
ASTM F 2854 : 2010 : R2016
|
Standard Specification for Push-Fit Crosslinked Polyethylene (PEX) Mechanical Fittings for Crosslinked Polyethylene (PEX) Tubing |
ASTM F 2905/F2905M : 2013
|
Standard Specification for Black Crosslinked Polyethylene (PEX) Line Pipe, Fittings and Joints For Oil and Gas Producing Applications |
API 15LE : 2008(R2018)
|
SPECIFICATION FOR POLYETHYLENE LINE PIPE (PE) |
ASTM F 2818:2010
|
Standard Specification for Specification for Crosslinked Polyethylene (PEX) Material Gas Pressure Pipe and Tubing |
ASTM D 2656 : 2013 : REDLINE
|
Standard Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 2001 to 35 000 V |
I.S. EN 62788-1-6:2017
|
MEASUREMENT PROCEDURES FOR MATERIALS USED IN PHOTOVOLTAIC MODULES - PART 1-6: ENCAPSULANTS - TEST METHODS FOR DETERMINING THE DEGREE OF CURE IN ETHYLENE-VINYL ACETATE |
ASTM F 3253 : 2017
|
Standard Specification for Crosslinked Polyethylene (PEX) Tubing with Oxygen Barrier for Hot- and Cold-Water Hydronic Distribution Systems |
ASTM F 1986 : 2001
|
Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Drinking-Water Systems |