• Shopping Cart
    There are no items in your cart

ASTM D 2969 : 2004 : R2014

Current

Current

The latest, up-to-date edition.

Standard Test Methods for Steel Tire Cords (Withdrawn 2023)

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

19-06-2014

€74.48
Excluding VAT

CONTAINED IN VOL. 07.01, 2015 Describes the testing of cords made from steel that are specifically designed for use in the reinforcement of pneumatic tires.

Committee
D 13
DocumentType
Test Method
Pages
17
ProductNote
Reconfirmed 2014
PublisherName
American Society for Testing and Materials
Status
Current
Supersedes

1.1These test methods cover the testing of cords made from steel that are specifically designed for use in the reinforcement of pneumatic tires. By agreement, these test methods may be used to test similar cords or filaments used for reinforcing other rubber products. The steel cords may be wound on spools or beams. The steel cords may also be woven into fabric, in which case they must be removed from the fabric prior to testing.

Note 1For other methods of testing tire cords and tire cord fabrics, refer to Methods D885, Test Methods D1871, Specifications D122, and Test Methods D2692 and D2970/D2970M. For tolerances on tire cords and tire cord fabrics, refer to Specifications D122 and Methods D885.

1.2These test methods include test procedures only; they do not establish specifications or tolerances.

1.3This test method includes the following sections:

Subject

Section

Adhesion of Steel Cords and Filaments to Elastomers

16

Brass Coating Composition and Mass

14, 15

Breaking Force (Strength)

10

Construction

12

Data Form for Reporting Test Results

Appendix X1

Elongation at Break

10

Elongation Between Defined Forces (EDF)

11

Flare

8

Lay

12

Linear Density

9

Visual Appearance

8

Nomenclature System

Annex A1

Residual Torsions

8

Straightness

8

Thickness and Out-of-Roundness

13


1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. See 14.3 and Note 11.

1.5The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

ASTM D 6320/D6320M : 2010 : R2014 Standard Test Methods for Single Filament Hose Reinforcing Wire Made from Steel (Withdrawn 2023)
ASTM D 6477 : 2013 : EDT 1 Standard Terminology Relating to Tire Cord, Bead Wire, Hose Reinforcing Wire, and Fabrics (Withdrawn 2022)

ASTM D 1871 : 2002 Standard Test Method for Adhesion Between Tire Bead Wire and Rubber
ASTM D 1871 : 2004 : R2010 Standard Test Method for Adhesion Between Tire Bead Wire and Rubber
ASTM D 2692 : 2007 Standard Test Method for Air Wicking of Tire Fabrics, Tire Cord Fabrics, Tire Cord, and Yarns
ASTM D 6477 : 2003 Standard Terminology Relating to Tire Cord, Bead Wire, Hose Reinforcing Wire, and Fabrics
ASTM D 6477 : 2022 Standard Terminology Relating to Tire Cord, Bead Wire, Hose Reinforcing Wire, and Fabrics
ASTM D 1871 : 2004 Standard Test Method for Adhesion Between Tire Bead Wire and Rubber
ASTM D 2229 : 1999 Standard Test Method for Adhesion Between Steel Tire Cords and Rubber
ASTM D 2229 : 2004 : EDT 1 Standard Test Method for Adhesion Between Steel Tire Cords and Rubber
ASTM D 1871 : 2004 : R2014 Standard Test Method for Adhesion Between Tire Bead Wire and Rubber (Withdrawn 2023)
ASTM D 122 : 1984 : EDT 1 Tolerances for Tire Fabrics Other than Tire Cord Fabrics
ASTM D 885 : 2001 Standard Test Methods for Tire Cords, Tire Cord Fabrics, and Industrial Filament Yarns Made from Man-Made Organic-Base Fibers
ASTM D 6477 : 2013 : EDT 1 Standard Terminology Relating to Tire Cord, Bead Wire, Hose Reinforcing Wire, and Fabrics (Withdrawn 2022)
ASTM D 4393 : 2000 Standard Test Method for Strap Peel Adhesion of Reinforcing Cords or Fabrics to Rubber Compounds
ASTM D 2229 : 2002 Standard Test Method for Adhesion Between Steel Tire Cords and Rubber
ASTM D 6477 : 2013 Standard Terminology Relating to Tire Cord, Bead Wire, Hose Reinforcing Wire, and Fabrics
ASTM D 2904 : 1997 Standard Practice for Interlaboratory Testing of a Textile Test Method that Produces Normally Distributed Data
ASTM D 2970/D2970M : 1998 : EDT 1 Standard Test Method for Testing Tire Cords, Tire Cord Fabrics, and Industrial Yarns Made From Glass Filaments
ASTM D 6477 : 2002 Standard Terminology Relating to Tire Cord and Fabrics
ASTM D 6477 : 2002 : REV A Standard Terminology Relating to Tire Cord and Fabrics
ASTM D 76 : 1999 Standard Specification for Tensile Testing Machines for Textiles
ASTM D 4393 : 2004 Standard Test Method for Strap Peel Adhesion of Reinforcing Cords or Fabrics to Rubber Compounds
ASTM E 663 : 1986 : R1991 : EDT 1 Practice for Flame Atomic Absorption Analysis (Withdrawn 1997)
ASTM D 2229 : 2010 Standard Test Method for Adhesion Between Steel Tire Cords and Rubber
ASTM D 2692 : 2004 Standard Test Method for Air Wicking of Tire Fabrics, Tire Cord Fabrics, Tire Cord, and Yarns
ASTM D 2692 : 1998 Standard Test Method for Air Wicking of Tire Fabrics, Tire Cord Fabrics, Tire Cord, and Yarns
ASTM D 6477 : 2011 Standard Terminology Relating to Tire Cord, Bead Wire, Hose Reinforcing Wire, and Fabrics
ASTM D 6477 : 1999 Standard Terminology Relating to Tire Cord and Fabrics
ASTM D 4393 : 2002 Standard Test Method for Strap Peel Adhesion of Reinforcing Cords or Fabrics to Rubber Compounds
ASTM D 1871 : 1998 Standard Test Methods for Adhesion of Single-Filament Steel Wire to Rubber
ASTM D 123 : 2001 Standard Terminology Relating to Textiles
ASTM D 2229 : 2010 : R2014 Standard Test Method for Adhesion Between Steel Tire Cords and Rubber (Withdrawn 2023)
ASTM D 2229 : 2004 Standard Test Method for Adhesion Between Steel Tire Cords and Rubber
ASTM D 6477 : 2004 Standard Terminology Relating to Tire Cord, Bead Wire, Hose Reinforcing Wire, and Fabrics
ASTM D 6477 : 2009 Standard Terminology Relating to Tire Cord, Bead Wire, Hose Reinforcing Wire, and Fabrics

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.