ASTM D 3061 : 1997 : R2008
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Guide for Three-Piece Steel and Tinplate Straight-Wall and Necked-In Aerosol Cans
Hardcopy , PDF
11-11-2014
English
01-10-2008
Important note : Users cannot be edited or removed once added to your Multi user PDF.CONTAINED IN VOL. 15.09, 2015 Defines guidelines which are suggested for U.S. three-piece steel and tin-plate aerosol cans of straight-wall and necked-in design.
| Committee |
D 10
|
| DocumentType |
Guide
|
| Pages |
6
|
| ProductNote |
Reconfirmed 2008 Reconfirmed 2014
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1 In the interest of uniformity and quality, the aerosol industry has developed dimensional guidelines which are suggested for U.S. three-piece steel and tin-plate aerosol cans of straight-wall and necked-in design. Domestic can makers uniformly agreed to comply with these guidelines and were instrumental in their development. A series of standard methods and gages were also developed to uniformly determine specific dimensions. The tolerances established for these dimensions allow for can manufacturing and filling process variations.
1.2 It is the purpose of this guide to provide a listing of currently manufactured aerosol can sizes as well as industry voluntary dimensional guidelines.
1.3 Table 1 and Table 2 present the sales code diameter and height of straight-wall and necked-in three-piece aerosol cans. The units in parentheses are in SI format, an alternate reference using dimensions suggested by the Metric Working Group of the Can Makers Institute. They are based on International Organization for Standardization (ISO) inside diameters to the nearest whole millimetre. Can heights are based on heights over the double seam (CSMA Dimension D) converted to the nearest whole millimetre.
1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
TABLE 1 Sales Code Height for Various Diameters of
Straight-Wall Aerosol Cans (SI)
| 202 (52 mm) by | 207.5 (60 mm) by | 211 (65 mm) by | 300 (73 mm) by |
|---|---|---|---|
| 214 ( 73) | 509 (141) | 413 (122) | 709 (192) |
| 306 ( 85) | 605 (160) | 600 (152) | |
| 314 ( 98) | 701 (179) | 604 (158) | |
| 406 (111) | 703 (182) | 612 (171) | |
| 505 (134) | 708 (190) | 713 (198) | |
| 509 (141) | 713 (198) | 908 (241) | |
| 700 (177) | |||
| 708 (190) |
TABLE 2 Sales Code Height for Various Diameters of Necked-In Aerosol Cans (SI)
| 111/112 by (45 mm) | 200/202 by (52 mm) | 202/205 by (57 mm) | 207.5/211 by (65 mm) | 211/214 by (70 mm) |
|---|---|---|---|---|
| 214 ( 73) | 214 ( 73) | 410 (117) | 413 (122) | 315 (100) |
| 312 ( 95) | 314 ( 98) | 604 (158) | 604 (158) | 413 (122) |
| 410 (117) | 406 (111) | 608 (165) | 612 (171) | 714 (200) |
| 508 (139) | 509 (141) | 701 (179) | 713 (198) | 804 (209) |
| 608 (165) | 514 (149) | 704 (184) | 1006 (263) | |
| 700 (177) | 710 (193) | |||
| 708 (190) | 802 (206) | |||
| 803 (207) |
| ASTM D 2652 : 2011 : REDLINE | Standard Terminology Relating to Activated Carbon |
| ASME N45.2.6 : 1978 | QUALIFICATIONS OF INSPECTION, EXAMINATION, AND TESTING PERSONNEL FOR NUCLEAR POWER PLANTS |
| MIL-STD-45662 Revision A:1988 | CALIBRATION SYSTEMS REQUIREMENTS |
| MIL-F-51079 Revision D:1985 | FILTER MEDIUM, FIRE RESISTANT, HIGH EFFICIENCY |
| MIL-F-51068 Revision F:1986 | FILTERS, PARTICULATE (HIGH-EFFICIENCY FIRE RESISTANT) |
| CFR 49(PTS100-185) : 0 | TRANSPORTATION |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.