ASTM D 3195 : 1990 : R2004
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practice for Rotameter Calibration
Hardcopy , PDF
11-11-2014
English
01-10-2004
Important note : Users cannot be edited or removed once added to your Multi user PDF.CONTAINED IN VOL. 11.03, 2005 Outlines the calibration of variable-area flowmeters (rotameters) used for evaluating air sample volumes at or close to ambient conditions of temperature and pressure in the analysis of atmospheres for pollutant content.
| Committee |
D 22
|
| DocumentType |
Standard Practice
|
| Pages |
4
|
| ProductNote |
Reconfirmed 2004
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1 This practice covers the calibration of variable-area flowmeters (rotameters) used to determine air sample volumes at or close to ambient conditions of pressure and temperature, in the analysis of atmospheres for pollutant content.
This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| ASTM E 2543 : 2008 : R2014 | Standard Specification for Portable Air Heaters Used at Personnel Decontamination Stations and Shelters |
| ASTM D 6348 : 2012 : EDT 1 | Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy |
| ASTM D 7614 : 2012 | Standard Test Method for Determination of Total Suspended Particulate (TSP) Hexavalent Chromium in Ambient Air Analyzed by Ion Chromatography (IC) and Spectrophotometric Measurements |
| ASTM D 2914 : 2015 | Standard Test Methods for Sulfur Dioxide Content of the Atmosphere (West-Gaeke Method) |
| ASTM D 5742 : 2016 | Standard Test Method for Determination of Butane Activity of Activated Carbon |
| ASTM D 7049 : 2017 | Standard Test Method for Metalworking Fluid Aerosol in Workplace Atmospheres |
| ASTM D 4532 : 2015 | Standard Test Method for Respirable Dust in Workplace Atmospheres Using Cyclone Samplers |
| ASTM D 3154 : 2014 | Standard Test Method for Average Velocity in a Duct (Pitot Tube Method) |
| ASTM D 6420 : 2018 | Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry |
| ASTM D 3609 : 2000 : R2014 | Standard Practice for Calibration Techniques Using Permeation Tubes |
| ASTM D 4185 : 2017 | Standard Test Method for Measurement of Metals in Workplace Atmospheres by Flame Atomic Absorption Spectrophotometry |
| ASTM D 7743 : 2012 | Standard Test Method for Measuring the Minimum Fluidization Velocities of Free Flowing Powders |
| ASTM D 3608 : 2019 | Standard Test Method for Nitrogen Oxides (Combined) Content in the Atmosphere by the Griess-Saltzman Reaction |
| ASTM E 1333 : 2014 | Standard Test Method for Determining Formaldehyde Concentrations in Air and Emission Rates from Wood Products Using a Large Chamber |
| ASTM D 5197 : 2016 | Standard Test Method for Determination of Formaldehyde and Other Carbonyl Compounds in Air (Active Sampler Methodology) |
| ASTM D 6007 : 2014 | Standard Test Method for Determining Formaldehyde Concentrations in Air from Wood Products Using a Small-Scale Chamber |
| ASTM D 6832 : 2013 : R2018 | Standard Test Method for the Determination of Hexavalent Chromium in Workplace Air by Ion Chromatography and Spectrophotometric Measurement Using 1,5-diphenylcarbazide |
| ASTM D 5207 : 2014 | Standard Practice for Confirmation of 20–mm (50–W) and 125–mm (500–W) Test Flames for Small-Scale Burning Tests on Plastic Materials |
| ASTM D 5755 : 2009 : R2014 : EDT 1 | Standard Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Structure Number Surface Loading (Withdrawn 2023) |
| ASTM D 7144 : 2005 : REV A : R2016 | Standard Practice for Collection of Surface Dust by Micro-vacuum Sampling for Subsequent Metals Determination |
| ASTM D 5228 : 2016 | Standard Test Method for Determination of Butane Working Capacity of Activated Carbon |
| ASTM D 5110 : 1998 : R2017 | Standard Practice for Calibration of Ozone Monitors and Certification of Ozone Transfer Standards Using Ultraviolet Photometry |
| ASTM D 5011 : 2017 | Standard Practices for Calibration of Ozone Monitors Using Transfer Standards |
| ASTM D 5116 : 2017 | Standard Guide for Small-Scale Environmental Chamber Determinations of Organic Emissions from Indoor Materials/Products |
| ASTM E 2542 : 2008 : R2014 | Standard Specification for Portable Water Heaters Used at Personnel Decontamination Stations |
| ASTM D 6785 : 2013 | Standard Test Method for Determination of Lead in Workplace Air Using Flame or Graphite Furnace Atomic Absorption Spectrometry |
| ASTM D 2913 : 2014 | Standard Test Method for Mercaptan Content of the Atmosphere |
| ASTM D 6332 : 2012 : R2017 | Standard Guide for Testing Systems for Measuring Dynamic Responses of Carbon Monoxide Detectors to Gases and Vapors |
| ASTM D 3824 : 2012 | Standard Test Methods for Continuous Measurement of Oxides of Nitrogen in the Ambient or Workplace Atmosphere by the Chemiluminescent Method |
| ASTM D 1071 : 2017 | Standard Test Methods for Volumetric Measurement of Gaseous Fuel Samples |
| ASTM E 1 : 2014 : REDLINE | Standard Specification for ASTM Liquid-in-Glass Thermometers |
| ASTM E 337 : 2015 : REDLINE | Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.