Skip to content
Please enter a keyword to search

  • ASTM D 3664 : 2016

    Current The latest, up-to-date edition.

    Standard Specification for Biaxially Oriented Polymeric Resin Film for Capacitors in Electrical Equipment (Withdrawn 2022)

    Available format(s):  Hardcopy, PDF

    Language(s):  English

    Published date:  24-11-2016

    Publisher:  American Society for Testing and Materials

    Add To Cart

    Scope - (Show below) - (Hide below)

    1.1This specification covers thin biaxially oriented polymeric resin film for use in capacitors for electrical equipment. The material is biaxially oriented to improve the tensile properties in the machine (MD) and transverse (TD) directions.

    1.2The values stated in SI units are the standard. The values in parentheses are for information only.

    Note 1:This standard resembles IEC 60674–3–2, Specification for plastic films for electrical use, in title only. The content is significantly different.

    1.3The following safety hazards caveat pertains only to the test methods section of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific warning statements see 9.3 and Table 1 footnote B.

    General Product Information - (Show below) - (Hide below)

    Committee D 09
    Document Type Standard
    Publisher American Society for Testing and Materials
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    ASTM D 4967 : 2021 Standard Guide for Selecting Materials to Be Used for Insulation, Jacketing, and Strength Components in Fiber-Optic Cables
    ASTM D 4967 : 1999 : R2013 Standard Guide for Selecting Materials to Be Used for Insulation, Jacketing and Strength Components in Fiber-Optic Cables

    Standards Referencing This Book - (Show below) - (Hide below)

    ASTM D 1004 : 2008 Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting
    ASTM D 1435 : 2013 Standard Practice for Outdoor Weathering of Plastics
    ASTM D 3420 : 2008 Standard Test Method for Pendulum Impact Resistance of Plastic Film
    ASTM D 1204 : 2007 Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature
    ASTM D 3755 : 2020 Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials Under Direct-Voltage Stress
    ASTM D 1434 : 1982 : R2003 Standard Test Method for Determining Gas Permeability Characteristics of Plastic Film and Sheeting
    ASTM D 3636 : 2000 Standard Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials
    ASTM D 2305 : 2010 Standard Test Methods for Polymeric Films Used for Electrical Insulation
    ASTM D 1004 : 1994 : REV A Standard Test Method for Initial Tear Resistance of Plastic Film and Sheeting
    ASTM D 2176 : 2016 : R2021 Standard Test Method for Folding Endurance of Paper and Plastics Film by the M.I.T. Tester
    ASTM D 3420 : 2014 Standard Test Method for Pendulum Impact Resistance of Plastic Film
    ASTM D 1004 : 2009 Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting
    ASTM D 1204 : 2014 Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature
    ASTM D 3420 : 2008 : REV A Standard Test Method for Pendulum Impact Resistance of Plastic Film
    ASTM E 96/E96M : 2021 Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials
    ASTM D 1004 : 2013 Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting
    ASTM D 2305 : 2018 Standard Test Methods for Polymeric Films Used for Electrical Insulation
    ASTM D 2863 : 2008 Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)
    ASTM D 1004 : 1994 : REV A : R2003 Standard Test Method for Initial Tear Resistance of Plastic Film and Sheeting
    ASTM D 257 : 2014 Standard Test Methods for DC Resistance or Conductance of Insulating Materials
    ASTM D 3985 : 2005 Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using a Coulometric Sensor
    ASTM D 3420 : 2021 Standard Test Method for Pendulum Impact Resistance of Plastic Film
    ASTM E 96/E96M : 2022 Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials
    ASTM D 1204 : 2008 Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature
    ASTM D 3985 : 2005 : R2010 : EDT 1 Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using a Coulometric Sensor
    ASTM D 3985 : 2002 : EDT 1 Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using a Coulometric Sensor
    ASTM D 543 : 2021 Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents
    ASTM D 1505 : 2003 Standard Test Method for Density of Plastics by the Density-Gradient Technique
    ASTM D 3636 : 2013 : REV A : EDT 1 Standard Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials
    ASTM D 202 : 1997 Standard Test Methods for Sampling and Testing Untreated Paper Used for Electrical Insulation
    ASTM D 2863 : 2012 Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)
    ASTM D 6054 : 1997 Standard Practice for Conditioning Electrical Insulating Materials for Testing
    ASTM D 2863 : 2000 Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)
    ASTM D 774/D774M : 1997 Standard Test Method for Bursting Strength of Paper
    ASTM D 1004 : 2003 Standard Test Method for Initial Tear Resistance of Plastic Film and Sheeting
    ASTM D 1204 : 2014 : R2020 Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature
    ASTM D 2863 : 2006 : REV A Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)
    ASTM D 1004 : 2007 Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting
    ASTM D 1435 : 1994 Standard Practice for Outdoor Weathering of Plastics
    ASTM D 2863 : 2009 Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)
    ASTM D 2176 : 2016 Standard Test Method for Folding Endurance of Paper and Plastics Film by the M.I.T. Tester
    ASTM E 252 : 2006 : R2021 : EDT 1 Standard Test Method for Thickness of Foil, Thin Sheet, and Film by Mass Measurement
    ASTM D 2176 : 1997 : REV A Standard Test Method for Folding Endurance of Paper by the M.I.T. Tester
    ASTM D 3636 : 2006 Standard Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials
    ASTM D 2863 : 1995 Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-like Combustion of Plastics (Oxygen Index)
    ASTM D 2176 : 1997 : REV A : R2002 Standard Test Method for Folding Endurance of Paper by the M.I.T. Tester
    ASTM D 2863 : 2019 Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)
    ASTM E 96/E96M : 2016 Standard Test Methods for Water Vapor Transmission of Materials
    ASTM D 2305 : 1999 Standard Test Methods for Polymeric Films Used for Electrical Insulation
    ASTM D 3636 : 2019 Standard Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials
    ASTM D 3636 : 2013 Standard Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials
    ASTM D 2305 : 2002 Standard Test Methods for Polymeric Films Used for Electrical Insulation
    ASTM D 3755 : 1997 Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials Under Direct-Voltage Stress
    ASTM D 1505 : 1968 : R1979 Standard Test Method for Density Of Plastics By The Density-Gradient Technique
    ASTM D 1435 : 2005 Standard Practice for Outdoor Weathering of Plastics
    ASTM D 2863 : 2006 Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)
    ASTM D 543 : 2020 Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents
    ASTM D 2176 : 1997 : REV A : R2007 Standard Test Method for Folding Endurance of Paper by the M.I.T. Tester (Withdrawn 2010)
    ASTM D 1434 : 1982 : R2015 : EDT 1 Standard Test Method for Determining Gas Permeability Characteristics of Plastic Film and Sheeting
    ASTM D 3985 : 1995 Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using a Coulometric Sensor
    ASTM D 1505 : 2010 Standard Test Method for Density of Plastics by the Density-Gradient Technique
    ASTM D 1204 : 1994 : EDT 1 Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature
    ASTM D 2863 : 2017 Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)
    ASTM D 1434 : 1982 : R2009 : EDT 1 Standard Test Method for Determining Gas Permeability Characteristics of Plastic Film and Sheeting
    ASTM D 1505 : 2018 Standard Test Method for Density of Plastics by the Density-Gradient Technique
    ASTM E 252 : 2006 : R2013 Standard Test Method for Thickness of Foil, Thin Sheet, and Film by Mass Measurement
    ASTM D 3636 : 2013 : REV A Standard Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials
    ASTM D 1505 : 1998 : EDT 1 Standard Test Method for Density of Plastics by the Density-Gradient Technique
    ASTM D 3755 : 2014 Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials Under Direct-Voltage Stress
    ASTM D 3420 : 1995 Standard Test Method for Pendulum Impact Resistance of Plastic Film
    ASTM D 3636 : 2011 Standard Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials
    ASTM D 2863 : 2017 : REV A Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)
    ASTM D 1204 : 2002 Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature
    ASTM D 6054 : 1997 : R2004 Standard Practice for Conditioning Electrical Insulating Materials for Testing (Withdrawn 2012)
    ASTM D 3985 : 2002 Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using a Coulometric Sensor
    ASTM D 3985 : 2017 Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using a Coulometric Sensor
    ASTM D 257 : 2014 : R2021 : EDT 1 Standard Test Methods for DC Resistance or Conductance of Insulating Materials
    ASTM D 2863 : 2010 Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)
    ASTM D 1004 : 2021 Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting
    ASTM D 2863 : 2012 : EDT 1 Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)
    ASTM D 1434 : 1982 : R1998 Standard Test Method for Determining Gas Permeability Characteristics of Plastic Film and Sheeting
    ASTM D 2863 : 2013 Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)
    ASTM D 2176 : 1997 Standard Test Method for Folding Endurance of Paper by the M.I.T. Tester
    ASTM D 1435 : 1999 Standard Practice for Outdoor Weathering of Plastics
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective