ASTM D 3787 : 2016 : REDLINE
Current
The latest, up-to-date edition.
Standard Test Method for Bursting Strength of Textiles—Constant-Rate-of-Traverse (CRT) Ball Burst Test
English
01-01-2016
Important note : Users cannot be edited or removed once added to your Multi user PDF.CONTAINED IN VOL. 07.02, 2016 Specifies the measurement for bursting strength with a ball burst strength tester of textiles or garments that exhibit a high degree of ultimate elongation.
| Committee |
D 13
|
| DocumentType |
Redline
|
| Pages |
5
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
1.1This test method describes the measurement for bursting strength with a ball burst strength tester of textiles or garments that exhibit a high degree of ultimate elongation.
1.2The values stated in either SI units or inch-pound units are to be regarded separately as the standard. Within the test, the inch-pound units are shown in parentheses. The values stated in each system are not exact equivalents; therefore, each system may be used independently of the other. Combining values from the two systems may result in nonconformance within the specification.
Note 1:For the measurement of bursting strength with a hydraulic testing machine, refer to Test Method D3786.
Note 2:Constant Rate of Traverse (CRT) machines and Constant Rate of Extension (CRE) machines have been shown to provide different results. When using a CRE device, refer to Test Method D6797.
1.3This standard may involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| ASTM D 6797 : 2015 : REDLINE | Standard Test Method for Bursting Strength of Fabrics Constant-Rate-of-Extension (CRE) Ball Burst Test (Withdrawn 2024) |
| MIL-PRF-32433 Base Document:2012 | BLANKET, WASHABLE, FLAME RESISTANT, SHIPBOARD |
| ASTM D 4119 : 2014 : REDLINE | Standard Performance Specification for Men’s and Boys’ Knitted Dress Shirt Fabrics |
| A-A-50383 Revision B:1999 | UNDERSHIRT, EXTREME COLD WEATHER, MEN'S AND WOMEN'S |
| A-A-59495 Base Document:1999 | GLOVES, WOMEN'S |
| ASTM D 3887 : 1996 : R2008 | Standard Specification for Tolerances for Knitted Fabrics (Withdrawn 2017) |
| ASTM D 4037 : 2002 : R2013 | Standard Performance Specification for Woven, Knitted, or Flocked Bedspread Fabrics |
| ASTM D 3940 : 1983 | Test Method for Bursting Strength (Load) and Elongation of Sewn Semas of Knit or Woven Stretch Textile Fabrics (Withdrawn 1995) |
| ISEA 207 : 2011 | HIGH-VISIBILITY PUBLIC SAFETY VESTS |
| ASTM D 4234 : 2001 | Standard Performance Specification for Women's and Girls' Knitted Robe, Negligee, Nightgown, Pajama, Slip, and Lingerie Fabrics (Withdrawn 2005) |
| ASTM D 6663 : 2008 : R2013 | Standard Specification for Woven and Knitted Comforter and Accessory Products for Institutional and Household Use |
| ASTM D 4850 : 2013 | Standard Terminology Relating to Fabrics and Fabric Test Methods |
| ASTM D 4850 : 2013 : EDT 1 | Standard Terminology Relating to Fabrics and Fabric Test Methods |
| ASTM D 6664 : 2001 | Standard Specification for Woven, Knitted and Flocked Bedspread Products for Institutional and Household Use (Withdrawn 2010) |
| ASTM D 5431 : 2008 | Standard Performance Specification for Woven and Knitted Sheeting Products for Institutional and Household Use |
| NFPA 1977 : 2016 | PROTECTIVE CLOTHING AND EQUIPMENT FOR WILDLAND FIRE FIGHTING |
| ASTM D 7019 : 2014 : REDLINE | Standard Performance Specification for Brassiere, Slip, Lingerie and Underwear Fabrics |
| MIL-DTL-43741 Revision C:2007 | NECKERCHIEF, COTTON, KNITTED |
| ASTM F 2374 : 2018-02 | PRACTICE FOR DESIGN, MANUFACTURE, OPERATION, AND MAINTENANCE OF INFLATABLE AMUSEMENT DEVICES |
| A-A-50378 Revision B:1999 | DRAWERS, EXTREME COLD WEATHER, MEN'S AND WOMEN'S |
| MIL-DTL-32173 Base Document:2004 | GLOVES, FLYER'S, INTERMEDIATE COLD, HAU-15/P |
| ASTM D 4850 : 2013 : R2017 | Standard Terminology Relating to Fabrics and Fabric Test Methods |
| NFPA 2112 : 2018 | FLAME-RESISTANT GARMENTS FOR PROTECTION OF INDUSTRIAL PERSONNEL AGAINST FLASH FIRE |
| ISEA 107 : 2015 | HIGH-VISIBILITY SAFETY APPAREL AND ACCESSORIES |
| ASTM D 6321/D6321M : 2014 : REDLINE | Standard Practice for the Evaluation of Machine Washable T-Shirts |
| ASTM F 2903 : 2011 | Standard Guide for Tissue Engineered Medical Products (TEMPs) for Reinforcement of Tendon and Ligament Surgical Repair (Withdrawn 2020) |
| ASTM D 6321 : 1998 | Standard Practice for the Evaluation of Machine Washable T-Shirts |
| ASTM D 4037 : 2002 : R2008 | Standard Performance Specification for Woven, Knitted, or Flocked Bedspread Fabrics |
| ASTM F 2286 : 2016 : REDLINE | Standard Design and Performance Specification for Removable Mesh Fencing for Swimming Pools, Hot Tubs, and Spas |
| ASTM D 4035 : 2014 : REDLINE | Standard Performance Specification for Knitted Necktie and Scarf Fabrics |
| NFPA 1999 : 2018 | PROTECTIVE CLOTHING AND ENSEMBLES FOR EMERGENCY MEDICAL OPERATIONS |
| ASTM D 4115 : 2014 : REDLINE | Standard Performance Specification for Women’s and Girls’ Knitted and Woven Dress Glove Fabrics |
| MIL-DTL-32094 Base Document:2001 | GLOVE, AIRCREW, COLD/WET PROTECTIVE, HAU-14/P |
| MIL-DTL-44419 Revision A:2006 | GLOVES, MEN'S AND WOMEN'S, INTERMEDIATE COLD/WET |
| ASTM D 7023 : 2006 : R2012 | Standard Terminology Relating to Home Furnishings |
| ASTM F 2970 : 2017 : REDLINE | Standard Practice for Design, Manufacture, Installation, Operation, Maintenance, Inspection and Major Modification of Trampoline Courts |
| TAPPI T 570 : 0 | RESISTANCE TO MECHANICAL PENETRATION OF SANITARY TISSUE PAPERS (BALL BURST PROCEDURE) |
| ASTM D 3786/D3786M : 2018 : REDLINE | Standard Test Method for Bursting Strength of Textile Fabrics—Diaphragm Bursting Strength Tester Method |
| ASTM D 4154 : 2014 : REDLINE | Standard Performance Specification for Men’s and Boys’ Knitted and Woven Beachwear and Sports Shirt Fabrics |
| ASTM D 6663 : 2008 | Standard Specification for Woven and Knitted Comforter and Accessory Products for Institutional and Household Use |
| ASTM D 7268 : 2014 : REDLINE | Standard Performance Specification for Seamless Knit Garments Including Intimates and Swimwear |
| NASA KSC MTB 175-88 : 1994 | PROCEDURE FOR CASUAL EXPOSURE OF MATERIALS TO HYPERGOLIC FLUIDS |
| ASTM D 3996 : 2014 : REDLINE | Standard Performance Specification for Knit Swimwear Fabrics |
| A-A-55270 Base Document:1995 | UNDERWEAR SET, LIGHTWEIGHT, COLD WEATHER |
| NFPA 1976 : 2000 | PROTECTIVE ENSEMBLE FOR PROXIMITY FIRE FIGHTING |
| CSA Z96 : 2015 | HIGH-VISIBILITY SAFETY APPAREL |
| ASTM D 3655 : 2014 : REDLINE | Standard Performance Specification for Men’s and Women’s Sliver Knitted Overcoat and Jacket Fabrics |
| ASTM D 5431 : 2008 : R2013 | Standard Performance Specification for Woven and Knitted Sheeting Products for Institutional and Household Use |
| ASTM D 7021 : 2014 : REDLINE | Standard Performance Specification for Bathrobe, Dressing Gown, Negligee, Nightgown, and Pajama Fabrics |
| ASTM D 3995 : 2014 : REDLINE | Standard Performance Specification for Men’s and Women’s Knitted Career Apparel Fabrics: Dress and Vocational |
| ASTM D 3887 : 1996 | Standard Specification for Tolerances for Knitted Fabrics |
| ASTM D 7023 : 2006 : EDT 1 | Standard Terminology Relating to Home Furnishings |
| ASTM D 4037 : 2002 | Standard Performance Specification for Woven, Knitted, or Flocked Bedspread Fabrics |
| MIL-DTL-32237 Revision C:2016 | BOOT, COMBAT, HOT WEATHER ARMY |
| MIL-DTL-3866 Revision H:2005 | Gloves, Cloth, Cotton, Knitted, Lightweight (No S/S Document) |
| MIL-C-87059 Revision A:1989 | CLOTH, KNITTED, NYLON, TRICOT |
| ASTM D 4116 : 2014 : REDLINE | Standard Performance Specification for Women’s and Girls’ Knitted and Woven Corset-Girdle-Combination Fabrics |
| ASTM D 7023 : 2006 : R2018 | Standard Terminology Relating to Home Furnishings |
| NFPA 1951 : 2013 | PROTECTIVE ENSEMBLES FOR TECHNICAL RESCUE INCIDENTS |
| ASTM D 3089 : 1997 : R2008 | Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes |
| ASTM D 7023 : 2006 | Standard Terminology Relating to Home Furnishings |
| ASTM D 4233 : 2001 | Standard Performance Specification for Women's and Girls' Knitted and Woven Brassiere Fabrics (Withdrawn 2005) |
| ASTM D 4110 : 2002 | Standard Performance Specification for Men's and Boys' Knitted Bathrobe, Dressing Gown, and Pajama Fabrics (Withdrawn 2005) |
| ASTM D 4156 : 2014 : REDLINE | Standard Performance Specification for Women’s and Girls’ Knitted Sportswear Fabrics |
| ASTM D 7017 : 2014 : REDLINE | Standard Performance Specification for Rainwear and All-Purpose, Water-Repellent Coat Fabrics |
| ASTM D 3887 : 1996 : R2004 | Standard Specification for Tolerances for Knitted Fabrics |
| ASTM D 6797 : 2015 : REDLINE | Standard Test Method for Bursting Strength of Fabrics Constant-Rate-of-Extension (CRE) Ball Burst Test (Withdrawn 2024) |
| ASTM D 76 : 1999 | Standard Specification for Tensile Testing Machines for Textiles |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.