ASTM D 3930 : 2008 : R2015
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Adhesives for Wood-Based Materials for Construction of Manufactured Homes
Hardcopy , PDF
26-05-2023
English
15-04-2015
CONTAINED IN VOL. 15.06, 2015 Gives the means to measure and evaluate the performance of adhesives for structural or semistructural bonding of wood-to-wood in manufactured homes.
Committee |
D 14
|
DocumentType |
Standard
|
Pages |
19
|
ProductNote |
Reconfirmed 2015
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This specification provides the means to measure and evaluate the performance of adhesives for structural or semi-structural bonding of wood-to-wood in manufactured homes. Wood as used in this specification includes lumber, plywood, particleboard, gypsum board, and all materials having wood-based surfaces at the bondline. This specification does not cover other adhesives used in manufactured homes such as adhesives for carpet, floor tile, ceramic fixtures, plastic laminates, trim and millwork, and similar nonstructural applications.
1.1.1The performance of the adhesives is measured in the following tests:
Number | Test | Section |
1 | Low Temperature | 16 |
2 | Dry Lumber | 17 |
3 | Gap-Filling | 18 |
4 | High Temperature | 19 |
5 | Type 3 Qualification | 20 |
6 | Type 2 Qualification | 21 |
7 | Aging, Film Oxidation | 22 |
8 | Aging, Bond Oxidation | 23 |
9 | Resistance to Deformation, Creep | 24 |
10 | Mold | 25 |
11 | Type 1 Qualification | 26 |
1.2The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
ASTM D 1165 : 1980 : R1994 : EDT 1 | Standard Nonmenclature of Domestic Hardwoods and Softwoods (Withdrawn 2002) |
ASTM D 1165 : 2007 | Standard Nomenclature of Commercial Hardwoods and Softwoods |
ASTM D 9 : 2020 | Standard Terminology Relating to Wood and Wood-Based Products |
ASTM D 3632 : 1998 : R2011 | Standard Test Method for Accelerated Aging of Adhesive Joints by the Oxygen-Pressure Method |
ASTM A 376/A376M : 1998 | Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Central-Station Service |
ASTM D 1002 : 1999 | Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal) |
ASTM D 2294 : 1996 : R2008 | Standard Test Method for Creep Properties of Adhesives in Shear by Tension Loading (Metal-to-Metal) |
ASTM D 3110 : 1995 | Specification for Adhesives Used in Laminate Joints for Nonstructural Glued Lumber Products (Withdrawn 1996) |
ASTM D 2294 : 1996 : R2016 | Standard Test Method for Creep Properties of Adhesives in Shear by Tension Loading (Metal-to-Metal) |
ASTM D 2339 : 1998 | Standard Test Method for Strength Properties of Adhesives in Two-Ply Wood Construction in Shear by Tension Loading |
ASTM A 376/A376M : 2017 : REDLINE | Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Service |
ASTM A 376/A376M : 2019 | Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Service |
ASTM D 9 : 2012 : REDLINE | Standard Terminology Relating to Wood and Wood-Based Products |
ASTM D 2339 : 1998 : R2017 | Standard Test Method for Strength Properties of Adhesives in Two-Ply Wood Construction in Shear by Tension Loading |
ASTM D 3931 : 1993 : REV A : R1999 : EDT 1 | Standard Test Method for Determining Strength of Gap-Filling Adhesive Bonds in Shear by Compression Loading |
ASTM D 4300 : 2001 : R2013 | Standard Test Methods for Ability of Adhesive Films to Support or Resist the Growth of Fungi |
ASTM D 1002 : 2010 | Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal) |
ASTM D 907 : 2015 | Standard Terminology of Adhesives |
ASTM E 6 : 2002 | Standard Terminology Relating to Methods of Mechanical Testing |
ASTM D 905 : 2008 : R2021 | Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading |
ASTM D 3632 : 1998 : R2004 | Standard Test Method for Accelerated Aging of Adhesive Joints by the Oxygen-Pressure Method |
ASTM D 905 : 2008 : R2013 | Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading |
ASTM D 4300 : 2023 | Standard Test Methods for Ability of Adhesive Films to Support or Resist the Growth of Fungi |
ASTM D 4300 : 2001 | Standard Test Methods for Ability of Adhesive Films to Support or Resist the Growth of Fungi |
ASTM D 1002 : 2005 | Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal) |
ASTM D 3931 : 2008 | Standard Test Method for Determining Strength of Gap-Filling Adhesive Bonds in Shear by Compression Loading |
ASTM D 1165 : 2018 | Standard Nomenclature of Commercial Hardwoods and Softwoods |
ASTM D 2339 : 1998 : R2004 | Standard Test Method for Strength Properties of Adhesives in Two-Ply Wood Construction in Shear by Tension Loading |
ASTM D 907 : 2015 : R2023 | Standard Terminology of Adhesives |
ASTM D 3632 : 1998 : R2019 | Standard Test Method for Accelerated Aging of Adhesive Joints by the Oxygen-Pressure Method |
ASTM D 1002 : 2010 : R2019 | Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal) |
ASTM D 4300 : 1998 : REV A | Standard Test Methods for Ability of Adhesive Films to Support or Resist the Growth of Fungi |
ASTM E 6 : 2015 : EDT 3 | Standard Terminology Relating to Methods of Mechanical Testing |
ASTM E 6 : 2023 : REV A | Standard Terminology Relating to Methods of Mechanical Testing |
ASTM D 907 : 2015 : REDLINE | Standard Terminology of Adhesives |
ASTM D 905 : 1998 | Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading |
ASTM D 4300 : 2001 : R2021 : EDT 1 | Standard Test Methods for Ability of Adhesive Films to Support or Resist the Growth of Fungi |
ASTM D 2294 : 1996 | Standard Test Method for Creep Properties of Adhesives in Shear by Tension Loading (Metal-to-Metal) |
ASTM D 905 : 2008 | Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading |
ASTM D 1002 : 2001 | Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal) |
ASTM D 4300 : 2001 : R2008 | Standard Test Methods for Ability of Adhesive Films to Support or Resist the Growth of Fungi |
ASTM E 6 : 2015 : EDT 4 : REDLINE | Standard Terminology Relating to Methods of Mechanical Testing |
ASTM A 376/A376M : 2022 | Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Service |
ASTM D 2294 : 1996 : R2002 | Standard Test Method for Creep Properties of Adhesives in Shear by Tension Loading (Metal-to-Metal) |
ASTM D 1165 : 2003 | Standard Nonmenclature of Domestic Hardwoods and Softwoods |
ASTM D 3632 : 1998 | Standard Test Method for Accelerated Aging of Adhesive Joints by the Oxygen-Pressure Method |
ASTM D 1165 : 2013 | Standard Nomenclature of Commercial Hardwoods and Softwoods |
ASTM D 3931 : 2008 : R2015 | Standard Test Method for Determining Strength of Gap-Filling Adhesive Bonds in Shear by Compression Loading |
ASTM E 6 : 2015 : EDT 4 | Standard Terminology Relating to Methods of Mechanical Testing |
ASTM E 6 : 2023 | Standard Terminology Relating to Methods of Mechanical Testing |
ASTM D 2339 : 1998 : R2011 | Standard Test Method for Strength Properties of Adhesives in Two-Ply Wood Construction in Shear by Tension Loading |
ASTM D 3931 : 1993 : REV A : R2005 | Standard Test Method for Determining Strength of Gap-Filling Adhesive Bonds in Shear by Compression Loading |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.