ASTM D 4019 : 1994 : REV A
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Standard Test Method for Moisture in Plastics by Coulometric Regeneration of Phosphorus Pentoxide (Withdrawn 2002)
Hardcopy , PDF
05-11-2013
English
31-12-2010
CONTAINED IN VOL 08.02, 2001 Procedure to determine moisture in plastics. Plastics containing volatile components, such as monomers and plasticizers, may contaminate the electrolytic cell, used in the test, causing incorrect results.
Committee |
D 20
|
DocumentType |
Test Method
|
Pages |
5
|
PublisherName |
American Society for Testing and Materials
|
Status |
Withdrawn
|
1.1 This test method is used for the determination of moisture in most plastics. Plastics containing volatile components, such as monomers and plasticizers, may contaminate the electrolytic cell, used in the test, causing incorrect results.
1.2 This test method is suitable for measuring moisture over the range from 0.005% to almost 100%.
1.3 The values stated in SI units are to be regarded as the standard.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Note 1-There is no similar or equivalent ISO standard.BS ISO 8085-3:2001 | Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels. Metric series. Specifications Electrofusion fittings |
ASTM D 5577 : 1994 | Standard Guide for Techniques to Separate and Identify Contaminants in Recycled Plastics |
04/301931 DC : DRAFT JAN 2004 | ISO 13628-2 - PETROLEUM AND NATURAL GAS INDUSTRIES DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS |
ASTM D 5577 : 2019 | Standard Guide for Techniques to Separate and Identify Contaminants in Recycled Plastics |
ASTM D 5577 : 1994 : R2003 | Standard Guide for Techniques to Separate and Identify Contaminants in Recycled Plastics |
MIL-PRF-46190 Revision A:1997 | PREPEGS, WOVEN FABRIC, CARBON FIBER, RESIN IMPREGNATED |
BS ISO 8085-1:2001 | Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels. Metric series. Specifications Fittings for socket fusion using heated tools |
BS ISO 8085-2:2001 | Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels. Metric series. Specifications Spigot fittings for butt fusion, for socket fusion using heated tools and for use with eletrofusion fittings |
ISO 8085-3:2001 | Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels Metric series Specifications Part 3: Electrofusion fittings |
ISO 8085-1:2001 | Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels Metric series Specifications Part 1: Fittings for socket fusion using heated tools |
ASTM D 5577 : 1994 : R2010 : EDT 1 | Standard Guide for Techniques to Separate and Identify Contaminants in Recycled Plastics (Withdrawn 2019) |
ISO 8085-2:2001 | Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels Metric series Specifications Part 2: Spigot fittings for butt fusion, for socket fusion using heated tools and for use with electrofusion fittings |
ISO 10933:1997 | Polyethylene (PE) valves for gas distribution systems |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.