ASTM D 413 : 1998 : R2017

Current

Current The latest, up-to-date edition.

Standard Test Methods for Rubber Property—Adhesion to Flexible Substrate

Available format(s): Hardcopy, PDF

Language(s): English

Published date: 01-10-2017

Publisher: American Society for Testing and Materials

Abstract - (Show below) - (Hide below)

CONTAINED IN VOL. 09.01, 2017 Defines the determination of the adhesion strength between plies of fabric bonded with rubber or the adhesion of the rubber layer in articles made from rubber attached to other material.

Scope - (Show below) - (Hide below)

1.1These test methods cover the determination of the adhesion strength between plies of fabric bonded with rubber or the adhesion of the rubber layer in articles made from rubber attached to other material. They are applicable only when the adhered surfaces are approximately plane or uniformly circular as in belting, hose, tire carcasses, or rubber-covered sheet metal.

1.2When the adhered surfaces contain sharp bends, angles, or other gross irregularities that cannot be avoided in preparing test specimens, special test methods must be employed for evaluating adhesion.

1.3The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

General Product Information - (Show below) - (Hide below)

Committee	D 11
Document Type	Test Method
ISBN
Pages
Product Note	Reconfirmed 2017
Published
Publisher	American Society for Testing and Materials
Status	Current
Supersedes	ASTM D 413 : 1998 : R2013

Standards Referencing This Book - (Show below) - (Hide below)

ASTM D 3182 : 2015	Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D 3183 : 2010	Standard Practice for Rubber—Preparation of Pieces for Test Purposes from Products
ASTM D 3182 : 2007 : R2012	Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D 3182 : 1989 : R2006	Standard Practice for Rubber-Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D 3183 : 2009	Standard Practice for Rubber—Preparation of Pieces for Test Purposes from Products
ASTM D 3183 : 201	PRACTICE FOR RUBBER - PREPARATION OF PIECES FOR TEST PURPOSES FROM PRODUCTS
ASTM D 3182 : 1989 : R2001 : EDT 1	Standard Practice for Rubber-Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D 3183 : 2010 : R2015	Standard Practice for Rubber—Preparation of Pieces for Test Purposes from Products
ASTM D 3183 : 2007	Standard Practice for Rubber—Preparation of Product Pieces for Test Purposes from Products
ASTM D 3182 : 2007	Standard Practice for Rubber-Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D 3182 : 2016 : REDLINE	Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D 3183 : 1984 : R1998	Standard Practice for Rubber-Preparation of Pieces for Test Purposes from Products
ASTM D 3182 : 1989 : R2001	Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D 3182 : 2021	Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D 3182 : 1989 : R1994	Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D 3182 : 2016	Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D 3182 : 2021 : REV A	Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D 3183 : 2002	Standard Practice for Rubber—Preparation of Pieces for Test Purposes from Products
ASTM D 3183 : 2010 : R2019	Standard Practice for Rubber—Preparation of Pieces for Test Purposes from Products
ASTM D 3182 : 2015 : REV A	Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Add To Cart

Product Format

Quantity

Buy now

Add to cart

Create account

Committee	D 11
Document Type	Test Method
ISBN
Pages
Product Note	Reconfirmed 2017
Published
Publisher	American Society for Testing and Materials
Status	Current
Supersedes	ASTM D 413 : 1998 : R2013

Standards Referencing This Book - (Show below) - (Hide below)

ASTM D 3182 : 2015	Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D 3183 : 2010	Standard Practice for Rubber—Preparation of Pieces for Test Purposes from Products
ASTM D 3182 : 2007 : R2012	Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D 3182 : 1989 : R2006	Standard Practice for Rubber-Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D 3183 : 2009	Standard Practice for Rubber—Preparation of Pieces for Test Purposes from Products
ASTM D 3183 : 201	PRACTICE FOR RUBBER - PREPARATION OF PIECES FOR TEST PURPOSES FROM PRODUCTS
ASTM D 3182 : 1989 : R2001 : EDT 1	Standard Practice for Rubber-Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D 3183 : 2010 : R2015	Standard Practice for Rubber—Preparation of Pieces for Test Purposes from Products
ASTM D 3183 : 2007	Standard Practice for Rubber—Preparation of Product Pieces for Test Purposes from Products
ASTM D 3182 : 2007	Standard Practice for Rubber-Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D 3182 : 2016 : REDLINE	Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D 3183 : 1984 : R1998	Standard Practice for Rubber-Preparation of Pieces for Test Purposes from Products
ASTM D 3182 : 1989 : R2001	Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D 3182 : 2021	Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D 3182 : 1989 : R1994	Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D 3182 : 2016	Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D 3182 : 2021 : REV A	Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D 3183 : 2002	Standard Practice for Rubber—Preparation of Pieces for Test Purposes from Products
ASTM D 3183 : 2010 : R2019	Standard Practice for Rubber—Preparation of Pieces for Test Purposes from Products
ASTM D 3182 : 2015 : REV A	Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

View more information

ASTM D 413 : 1998 : R2017

Add To Cart

Access your standards online with a subscription