ASTM D 4150 : 2020 : REV A
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Terminology Relating to Gaseous Fuels
Hardcopy , PDF
13-08-2021
English
08-01-2021
Committee |
D 03
|
DocumentType |
Reference Material
|
Pages |
4
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This terminology standard defines the terms used in standards that are the responsibility of Committee D03 on Gaseous Fuels. These terms are used in:
1.1.1The sampling of gaseous fuels,
1.1.2The analysis of gaseous fuels for composition and various other physical properties, and
1.1.3Other practices related to the processing, transmission, and distribution of gaseous fuels.
1.2This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM D 7606 : 2017 | Standard Practice for Sampling of High Pressure Hydrogen and Related Fuel Cell Feed Gases |
ASTM D 1988 : 2020 | Standard Test Method for Mercaptans in Natural Gas Using Length-of-Stain Detector Tubes |
ASTM D 7940 : 2014 | Standard Practice for Analysis of Liquefied Natural Gas (LNG) by Fiber-Coupled Raman Spectroscopy |
ASTM D 7892 : 2015 | Standard Test Method for Determination of Total Organic Halides, Total Non-Methane Hydrocarbons, and Formaldehyde in Hydrogen Fuel by Gas Chromatography/Mass Spectrometry |
ASTM D 4984 : 2020 | Standard Test Method for Carbon Dioxide in Natural Gas Using Length-of-Stain Detector Tubes |
ASTM D 5504 : 2020 | Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence |
ASTM D 4810 : 2020 | Standard Test Method for Hydrogen Sulfide in Natural Gas Using Length-of-Stain Detector Tubes |
ASTM D 7314 : 2021 | Standard Practice for Determination of the Heating Value of Gaseous Fuels using Calorimetry and On-line/At-line Sampling |
ASTM D 6273 : 2020 | Standard Test Method for Natural Gas Odor Intensity |
ASTM D 4888 : 2020 | Standard Test Method for Water Vapor in Natural Gas Using Length-of-Stain Detector Tubes |
ASTM D 7651 : 2017 | Standard Test Method for Gravimetric Measurement of Particulate Concentration of Hydrogen Fuel |
ASTM D 7551 : 2010 : R2015 | Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases and Natural Gas by Ultraviolet Fluorescence (Withdrawn 2024) |
ASTM D 7800/D7800M : 2014 | Standard Test Method for Determination of Elemental Sulfur in Natural Gas (Withdrawn 2023) |
ASTM D 8080 : 2021 | Standard Specification for Compressed Natural Gas (CNG) and Liquefied Natural Gas (LNG) Used as a Motor Vehicle Fuel |
ASTM D 7941/D7941M : 2014 | Standard Test Method for Hydrogen Purity Analysis Using a Continuous Wave Cavity Ring-Down Spectroscopy Analyzer |
ASTM D 8000 : 2015 : R2020 | Standard Practice for Flow Conditioning of Natural Gas and Liquids |
ASTM D 7904 : 2015 | Standard Test Method for Determination of Water Vapor (Moisture Concentration) in Natural Gas by Tunable Diode Laser Spectroscopy (TDLAS) |
ASTM D 7493 : 2014 : R2018 | Standard Test Method for Online Measurement of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatograph and Electrochemical Detection |
ASTM D 7607/D7607M : 2019 | Standard Test Method for Analysis of Oxygen in Gaseous Fuels (Electrochemical Sensor Method) |
ASTM D 4175 : 2001 : EDT 1 | Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants |
ASTM D 4175 : 2002 | Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants |
ASTM D 1142 : 1995 | Standard Test Method for Water Vapor Content of Gaseous Fuels by Measurement of Dew-Point Temperature |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.