ASTM D 4214 : 2007 : R2015
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films
Hardcopy , PDF
09-11-2023
English
11-06-2015
Important note : Users cannot be edited or removed once added to your Multi user PDF.CONTAINED IN VOL. 06.01, 2018 Defines the evaluation of the degree of chalking on white or tinted exterior paint films.
| Committee |
D 01
|
| DevelopmentNote |
Supersedes ASTM D 659 (12/2001)
|
| DocumentType |
Test Method
|
| Pages |
5
|
| ProductNote |
Reconfirmed 2015
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1These test methods cover the evaluation of the degree of chalking on white or tinted exterior paint films. These test methods describe the procedures recommended for transferring the chalk to a fabric or fingertip, which is then compared to photographic reference standards, or in the case of adhesive tapes, compared to a reflectance table or photographic reference standards, to determine the degree of chalking.
1.2The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| ASTM D 1006/D1006M : 2021 | Standard Practice for Conducting Exterior Exposure Tests of Hand and Factory Applied Paints on Wood and Wood Composite Materials |
| ASTM D 7856 : 2021 | Standard Specification for Color and Appearance Retention of Solid and Variegated Color Plastic Siding Products using CIELab Color Space |
| ASTM D 4587 : 2023 | Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings |
| ASTM D 3794 : 2022 | Standard Guide for Testing Coil Coatings |
| ASTM D 7787/D7787M : 2013 : R2022 | Standard Practice for Selecting Wood Substrates for Weathering Evaluations of Architectural Coatings |
| ASTM D 3361/D3361M : 2022 | Standard Practice for Unfiltered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings |
| ASTM D 6763 : 2016 : R2022 | Standard Guide for Testing Exterior Wood Stains and Clear Water Repellents |
| ASTM E 1795 : 2020 : REV A | Standard Specification for Non-Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
| ASTM E 1605 : 2022 | Standard Terminology Relating to Lead in Buildings |
| ASTM E 1796 : 2020 | Standard Guide for Selection and Use of Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
| ASTM D 662 : 1993 : R2019 | Standard Test Method for Evaluating Degree of Erosion of Exterior Paints |
| ASTM D 5722 : 2020 | Standard Practice for Performing Accelerated Outdoor Weathering of Factory-Coated Embossed Hardboard Using Concentrated Natural Sunlight and a Soak-Freeze-Thaw Procedure |
| ASTM D 5324 : 2016 : R2022 | Standard Guide for Testing Water-Borne Architectural Coatings |
| ASTM D 4141/D4141M : 2022 | Standard Practice for Conducting Black Box and Solar Concentrating Exposures of Coatings |
| ASTM D 5065 : 2017 : R2021 | Standard Guide for Assessing the Condition of Aged Coatings on Steel Surfaces |
| ASTM D 6577 : 2015 : R2019 | Standard Guide for Testing Industrial Protective Coatings |
| ASTM D 3794 : 2018 | Standard Guide for Testing Coil Coatings |
| ASTM E 1605 : 2018 : REV B | Standard Terminology Relating to Lead in Buildings |
| ASTM E 1797 : 2012 : R2017 : EDT 1 | Standard Specification for Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
| ASTM D 5324 : 2016 | Standard Guide for Testing Water-Borne Architectural Coatings |
| ASTM D 4141/D4141M : 2014 | Standard Practice for Conducting Black Box and Solar Concentrating Exposures of Coatings |
| ASTM E 1795 : 2017 | Standard Specification for Non-Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
| ASTM D 4587 : 2011 | Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings |
| ASTM D 3451 : 2006 : R2017 | Standard Guide for Testing Coating Powders and Powder Coatings |
| ASTM D 6763 : 2016 | Standard Guide for Testing Exterior Wood Stains and Clear Water Repellents |
| ASTM D 6695 : 2016 | Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings |
| ASTM D 7856 : 2015 : REV A | Standard Specification for Color and Appearance Retention of Solid and Variegated Color Plastic Siding Products using CIELab Color Space |
| ASTM D 5722 : 2014 | Standard Practice for Performing Accelerated Outdoor Weathering of Factory-Coated Embossed Hardboard Using Concentrated Natural Sunlight and a Soak-Freeze-Thaw Procedure |
| ASTM D 7787/D7787M : 2013 | Standard Practice for Selecting Wood Substrates for Weathering Evaluations of Architectural Coatings |
| ASTM A 755/A755M : 2018 | Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products |
| ASTM D 5065 : 2017 | Standard Guide for Assessing the Condition of Aged Coatings on Steel Surfaces |
| ASTM E 631 : 2015 | Standard Terminology of Building Constructions |
| ASTM E 1796 : 2003 : R2016 | Standard Guide for Selection and Use of Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
| ASTM D 5498 : 2012 : REV A : R2018 | Standard Guide for Developing a Training Program for Personnel Performing Coating and Lining Work Inspection for Nuclear Facilities |
| ASTM D 6577 : 2015 | Standard Guide for Testing Industrial Protective Coatings |
| ASTM D 662 : 1993 : R2011 | Standard Test Method for Evaluating Degree of Erosion of Exterior Paints |
| ASTM D 5031/D5031M : 2013 : R2018 | Standard Practice for Enclosed Carbon-Arc Exposure Tests of Paint and Related Coatings |
| ASTM D 1014 : 2018 | Standard Practice for Conducting Exterior Exposure Tests of Paints and Coatings on Metal Substrates |
| ASTM D 3361/D3361M : 2013 : R2018 | Standard Practice for Unfiltered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings |
| ASTM D 5146 : 2010 : R2019 | Standard Guide to Testing Solvent-Borne Architectural Coatings |
| ASTM D 822/D822M : 2013 : R2018 | Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings |
| ASTM E 1347 : 2006 : R2020 | Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry |
| ASTM E 1347 : 2006 : R2015 | Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry |
| ASTM E 1347 : 2003 | Standard Test Method for Color and Color-Difference Measurement by Tristimulus (Filter) Colorimetry |
| ASTM E 1347 : 1997 | Standard Test Method for Color and Color-Difference Measurement by Tristimulus (Filter) Colorimetry |
| ASTM D 662 : 1993 | Standard Test Method for Evaluating Degree of Erosion of Exterior Paints |
| ASTM E 1347 : 2006 | Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry |
| ASTM E 1347 : 2006 : R2011 | Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.