ASTM D 4262 : 2005 : R2018
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for pH of Chemically Cleaned or Etched Concrete Surfaces
Hardcopy , PDF
01-07-2024
English
01-08-2018
Important note : Users cannot be edited or removed once added to your Multi user PDF.CONTAINED IN VOL. 06.02, 2017 Defines procedures for determining the acidity or alkalinity of concrete surfaces prepared by chemical cleaning or etching prior to coating.
| Committee |
D 01
|
| DocumentType |
Test Method
|
| Pages |
2
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This test method covers procedures for determining the acidity or alkalinity of concrete surfaces prepared by chemical cleaning or etching prior to coating.
1.2This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.3This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM C 811 : 1998 : R2003 | Standard Practice for Surface Preparation of Concrete for Application of Chemical-Resistant Resin Monolithic Surfacings |
| NACE 6 : 2003 | SURFACE PREPARATION OF CONCRETE |
| ASTM D 5107 : 2003 : R2013 | Standard Practice for Preparatory Surface Cleaning of Architectural Sandstone |
| ASTM D 5295/D5295M : 2018 : REDLINE | Standard Guide for Preparation of Concrete Surfaces for Adhered (Bonded) Membrane Waterproofing Systems |
| ASTM E 1857 : 1997 : R2004 | Standard Guide for Selection of Cleaning Techniques for Masonry, Concrete, and Stucco Surfaces |
| ASTM D 3089 : 1997 : R2008 | Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes |
| ASTM D 6237 : 2009 : R2015 | Standard Guide for Painting Inspectors (Concrete and Masonry Substrates) |
| ASTM D 4258 : 2005 : R2017 | Standard Practice for Surface Cleaning Concrete for Coating |
| ASTM E 1857 : 1997 : R2013 : EDT 1 | Standard Guide for Selection of Cleaning Techniques for Masonry, Concrete, and Stucco Surfaces |
| ASTM D 5295 : 2000 : R2006 | Standard Guide for Preparation of Concrete Surfaces for Adhered (Bonded) Membrane Waterproofing Systems |
| ASTM D 5295 : 2000 | Standard Guide for Preparation of Concrete Surfaces for Adhered (Bonded) Membrane Waterproofing Systems |
| ASTM D 4258 : 2005 : R2012 | Standard Practice for Surface Cleaning Concrete for Coating |
| NACE 02203 : 0 | DESIGN, INSTALLATION, AND MAINTENANCE OF PROTECTIVE POLYMER FLOORING SYSTEMS FOR CONCRETE |
| ASTM D 4261 : 2005 : R2018 | Standard Practice for Surface Cleaning Concrete Masonry Units for Coating |
| ASTM E 1857 : 1997 | Standard Guide for Selection of Cleaning Techniques for Masonry, Concrete, and Stucco Surfaces |
| SSPC-GUIDE 20 : 2014 | GUIDE FOR APPLYING THICK FILM COATINGS AND SURFACINGS OVER CONCRETE FLOORS |
| ACI 302.2R : 2006 | GUIDE FOR CONCRETE SLABS THAT RECEIVE MOISTURE-SENSITIVE FLOORING MATERIALS |
| ACI 524R : 2016 | GUIDE TO PORTLAND CEMENT-BASED PLASTER |
| ASTM D 4261 : 2005 : R2012 | Standard Practice for Surface Cleaning Concrete Masonry Units for Coating |
| ASTM D 4260 : 2005 : R2017 | Standard Practice for Liquid and Gelled Acid Etching of Concrete |
| ASTM D 4261 : 2005 | Standard Practice for Surface Cleaning Concrete Masonry Units for Coating |
| ASTM C 811 : 1998 : R2008 | Standard Practice for Surface Preparation of Concrete for Application of Chemical-Resistant Resin Monolithic Surfacings (Withdrawn 2012) |
| ASTM D 5295/D5295M : 2018 | Standard Guide for Preparation of Concrete Surfaces for Adhered (Bonded) Membrane Waterproofing Systems |
| ASTM D 5498 : 2012 : REV A : R2018 | Standard Guide for Developing a Training Program for Personnel Performing Coating and Lining Work Inspection for Nuclear Facilities |
| ASTM D 4260 : 2005 | Standard Practice for Liquid and Gelled Acid Etching of Concrete |
| ASTM D 6237 : 2009 | Standard Guide for Painting Inspectors (Concrete and Masonry Substrates) |
| ASTM D 5107 : 2003 | Standard Practice for Preparatory Surface Cleaning of Architectural Sandstone |
| ASTM D 5107 : 2003 : R2007 | Standard Practice for Preparatory Surface Cleaning of Architectural Sandstone |
| NACE RP 05 91 : 91(R1996) | COATINGS FOR CONCRETE SURFACES IN NON-IMMERSION AND ATMOSPHERIC SERVICE |
| ASTM D 4260 : 2005 : R2012 | Standard Practice for Liquid and Gelled Acid Etching of Concrete |
| ASTM C 811 : 1998 | Standard Practice for Surface Preparation of Concrete for Application of Chemical-Resistant Resin Monolithic Surfacings |
| ASTM D 4258 : 2005 | Standard Practice for Surface Cleaning Concrete for Coating |
| ASTM F 3441 : 2024 : REV A | Standard Guide for Measurement of pH Involving Resilient Flooring Installations |
| PIP CTSC1000 : 2017 | APPLICATION OF COATINGS TO CONCRETE |
| ASTM D 4258 : 2023 | Standard Practice for Surface Cleaning Concrete for Coating |
| ASTM D 4260 : 2023 | Standard Practice for Liquid and Gelled Acid Etching of Concrete |
| ASTM C 1894 : 2022 | Standard Guide for Microbially Induced Corrosion of Concrete Products |
| ASTM F 3441 : 2023 : REV A | Standard Guide for Measurement of pH Below Resilient Flooring Installations |
| ASTM D 5107 : 2003 : R2022 | Standard Practice for Preparatory Surface Cleaning of Architectural Sandstone |
| ASTM E 1857 : 1997 : R2021 | Standard Guide for Selection of Cleaning Techniques for Masonry, Concrete, and Stucco Surfaces |
| ASTM D 6237 : 2019 | Standard Guide for Painting Inspectors (Concrete and Masonry Substrates) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.