ASTM D 4326 : 2021
Current
The latest, up-to-date edition.
Standard Test Method for Major and Minor Elements in Coal Ash By X-Ray Fluorescence
Hardcopy , PDF
English
26-10-2021
Important note : Users cannot be edited or removed once added to your Multi user PDF.| Committee |
D 05
|
| DocumentType |
Test Method
|
| Pages |
9
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1This test method covers the analysis of the commonly determined major and minor elements in ash from coal using X-ray fluorescence (XRF) techniques.
Note 1:Test Method D5016 is used for determination of sulfur.
Note 2:Although not included in the present method, the determination of barium, strontium, and manganese may be required to yield adequate totals.
1.2Units—The values stated in SI units are to be regarded as standard. The values given in parentheses after SI units are provided for information only and are not considered standard.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM D 1857/D1857M : 2018 | Standard Test Method for Fusibility of Coal and Coke Ash |
| ASTM D 7348 : 2013 | Standard Test Methods for Loss on Ignition (LOI) of Solid Combustion Residues |
| ASTM C 311/C311M : 2018 | Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete |
| ASTM D 5016 : 2016 | Standard Test Method for Total Sulfur in Coal and Coke Combustion Residues Using a High-Temperature Tube Furnace Combustion Method with Infrared Absorption |
| ASTM D 5759 : 2012 : R2020 | Standard Guide for Characterization of Coal Fly Ash and Clean Coal Combustion Fly Ash for Potential Uses |
| ASTM D 3174 : 2012 : R2018 : EDT 1 | Standard Test Method for Ash in the Analysis Sample of Coal and Coke from Coal |
| ASTM C 1709 : 2018 | Standard Guide for Evaluation of Alternative Supplementary Cementitious Materials (ASCM) for Use in Concrete |
| ASTM D 6700 : 2019 | Standard Guide for Use of Scrap Tires as Tire-Derived Fuel |
| ASTM D 8146 : 2022 | Standard Guide for Evaluating Test Method Capability and Fitness for Use |
| ASTM E 11 : 2020 | Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves |
| ASTM D 7582 : 2015 : R2023 | Standard Test Methods for Proximate Analysis of Coal and Coke by Macro Thermogravimetric Analysis |
| ASTM D 8146 : 2018 | Standard Guide for Evaluating Test Method Capability and Fitness for Use |
| ASTM E 11 : 2024 | Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves |
| ASTM D 5016 : 2024 | Standard Test Method for Total Sulfur in Coal and Coke Combustion Residues Using a High-Temperature Tube Furnace Combustion Method with Infrared Absorption |
| ASTM E 691 : 2020 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM E 11 : 2022 | Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves |
| ASTM E 691 : 2023 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM D 7582 : 2024 | Standard Test Methods for Proximate Analysis of Coal and Coke by Macro Thermogravimetric Analysis |
| ASTM D 7582 : 2015 | Standard Test Methods for Proximate Analysis of Coal and Coke by Macro Thermogravimetric Analysis |
| ASTM D 121 : 2015 : R2024 | Standard Terminology of Coal and Coke |
| ASTM E 691 : 2022 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM D 121 : 2024 | Standard Terminology of Coal and Coke |
| ASTM D 7348 : 2021 | Standard Test Methods for Loss on Ignition (LOI) of Solid Combustion Residues |
| ASTM D 121 : 2015 | Standard Terminology of Coal and Coke |
| ASTM E 691 : 2021 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.