• Shopping Cart
    There are no items in your cart

ASTM D 4389/D4389M : 2016

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

Standard Specification for Finished Glass Fabrics Woven From Rovings

Available format(s)

Hardcopy , PDF

Superseded date

26-08-2023

Language(s)

English

Published date

26-02-2016

€67.30
Excluding VAT

Committee
D 13
DocumentType
Standard
Pages
5
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

1.1This specification primarily covers glass fabrics woven from “E” electrical continuous glass fiber rovings that are intended primarily as a reinforcing material in laminated plastics for structural use.

1.2This specification specifies the terminology, definitions, general requirements, and physical requirements for woven roving glass fiber fabrics. This specification permits the application of sizing materials to the glass fiber roving during manufacture that helps facilitate weaving. When used as permitted in this specification, such materials are compatible with the resin matrix as specified in the contracting instrument.

Note 1:Sizing materials on glass fiber yarns, in most cases, are removed by various cleaning procedures as a first stage in preparing a finished fabric. When these yarn sizing materials are removed during a cleaning procedure, they need not be compatible with the subsequent resin matrix.

1.3Units—The values stated in either SI units or inch-pound units are to be regarded as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard.

Note 2:This specification is one of a series to provide a substitute for the following Military Specifications:
 MIL-Y-1140H Yarn, Cord, Sleeving, Cloth, and Tape-Glass
 MIL-C-9084C Cloth, Glass Finished for Resin Laminates
 MIL-C-19663C Cloth, Glass, Woven Roving for Plastic Laminates

ASTM F 2881/F2881M : 2021 : EDT 1 Standard Specification for 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications

ASTM D 3098 : 1984 Method of Test for Finish Content of Woven Glass Fabrics, Cleaned and After-Finished with Epoxy-Functions Silane Type Finishes for Plastic Laminates (Withdrawn 1988)
ASTM D 3774 : 1996 : R2012 Standard Test Method for Width of Textile Fabric
ASTM D 2410 : 1982 Test Method for Finish Content of Woven Glass Fabric, Cleaned and After-Finished with Chrome Complexes, for Plastic Laminates (Withdrawn 1988)
ASTM D 3774 : 1996 : R2004 Standard Test Methods for Width of Textile Fabric
ASTM D 1776 : 1998 : EDT 1 Standard Practice for Conditioning and Testing Textiles
ASTM D 3776 : 2007 Standard Test Methods for Mass Per Unit Area (Weight) of Fabric
ASTM D 1776 : 1967 : EDT 1 Standard Method Of Conditioning Textiles And Textile Products For Testing
ASTM D 3776 : 1996 Standard Test Methods for Mass Per Unit Area (Weight) of Fabric
ASTM D 2408 : 1982 Test Method for Finish Content of Woven Glass Fabric, Cleaned and After-Finished with Amino-Silane-Type Finishes, for Plastic Laminates (Withdrawn 1988)
ASTM D 3774 : 1996 : R2008 : EDT 2 Standard Test Method for Width of Textile Fabric
ASTM D 3773 : 2007 Standard Test Methods for Length of Woven Fabric
ASTM D 3775 : 2017 Standard Test Method for End (Warp) and Pick (Filling) Count of Woven Fabrics
ASTM D 2409 : 1984 Test Method for Finish Content of Woven Glass Fabric, Cleaned and After-Finished with Vinyl-Silane-Type Finishes, for Plastic Laminates (Withdrawn 1988)
ASTM D 3774 : 1996 : R2008 : EDT 1 Standard Test Methods for Width of Textile Fabric
ASTM D 4029 : 2009 Standard Specification for Finished Woven Glass Fabrics
ASTM D 3775 : 1998 Standard Test Method for Fabric Count of Woven Fabric
ASTM D 3776 : 2009 Standard Test Methods for Mass Per Unit Area (Weight) of Fabric
ASTM D 1776 : 2004 Standard Practice for Conditioning and Testing Textiles
ASTM D 1776 : 2008 : EDT 1 Standard Practice for Conditioning and Testing Textiles
ASTM D 3775 : 2002 Standard Test Method for Fabric Count of Woven Fabric
ASTM D 1776 : 2008 Standard Practice for Conditioning and Testing Textiles
ASTM D 3775 : 2007 Standard Test Method for Warp (End) and Filling (Pick) Count of Woven Fabrics
ASTM D 4029 : 1997 Standard Specification for Finished Woven Glass Fabrics
ASTM D 3774 : 2018 Standard Test Method for Width of Textile Fabric
ASTM D 4029 : 2004 Standard Specification for Finished Woven Glass Fabrics
ASTM D 3773 : 1990 : R2002 Standard Test Methods for Length of Woven Fabric
ASTM D 3775 : 2012 Standard Test Method for Warp (End) and Filling (Pick) Count of Woven Fabrics
ASTM D 3775 : 2003 : REV A Standard Test Method for Fabric Count of Woven Fabric
ASTM D 4963 : 1999 Standard Test Method for Ignition Loss of Glass Strands and Fabrics
ASTM D 3775 : 2007 : REV A Standard Test Method for Warp (End) and Filling (Pick) Count of Woven Fabrics
ASTM D 3775 : 2017 : EDT 1 Standard Test Method for End (Warp) and Pick (Filling) Count of Woven Fabrics
ASTM D 4963 : 2004 Standard Test Method for Ignition Loss of Glass Strands and Fabrics
ASTM D 3774 : 1996 Standard Test Methods for Width of Textile Fabric
ASTM D 3775 : 2017 : R2023 Standard Test Method for End (Warp) and Pick (Filling) Count of Woven Fabrics
ASTM D 3775 : 2008 Standard Test Method for Warp (End) and Filling (Pick) Count of Woven Fabrics
ASTM D 3774 : 1996 : R2016 Standard Test Method for Width of Textile Fabric
ASTM D 123 : 2001 Standard Terminology Relating to Textiles
ASTM D 7018 : 2004 Standard Terminology Relating to Glass Fiber and Its Products
ASTM D 3773 : 1990 : R1996 : EDT 1 Standard Test Methods for Length of Woven Fabric
ASTM D 3775 : 2003 Standard Test Method for Fabric Count of Woven Fabric
ASTM D 2660 : 1984 Test Method for Finish Content of Woven Glass Fabric, Cleaned and After-Finished with Acrylic-Silane-Type Finishes, for Plastic Laminates (Withdrawn 1988)

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.