ASTM D 4439 : 2024 : EDT 1
Current
Current
The latest, up-to-date edition.
Standard Terminology for Geosynthetics
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
15-05-2024
Committee |
D 35
|
DocumentType |
Reference Material
|
Pages |
7
|
ProductNote |
synthetic barrier” was editorially changed to “geosynthetic barrier bituminous” in May 2024
|
PublisherName |
American Society for Testing and Materials
|
Status |
Current
|
Supersedes |
ASTM D 6637/D6637M : 2015 : R2023 | Standard Test Method for Determining Tensile Properties of Geogrids by the Single or Multi-Rib Tensile Method |
ASTM D 7498/D7498M : 2009 : R2022 | Standard Test Method for Vertical Strip Drains Using a Large-Scale Consolidation Test |
ASTM D 5494 : 1993 : R2023 | Standard Test Method for the Determination of Pyramid Puncture Resistance of Unprotected and Protected Geomembranes |
ASTM D 7931/D7931M : 2021 : REV A | Standard Guide for Specifying Drainage Geocomposites |
ASTM D 7748/D7748M : 2014 : R2021 | Standard Test Method for Flexural Rigidity of Geogrids, Geotextiles, and Related Products |
ASTM D 4355/D4355M : 2021 | Standard Test Method for Deterioration of Geotextiles by Exposure to Light, Moisture, and Heat in a Xenon Arc-Type Apparatus |
ASTM D 6389 : 2023 | Standard Practice for Tests to Evaluate the Chemical Resistance of Geotextiles to Liquids |
ASTM D 5596 : 2003 : R2021 | Standard Test Method for Microscopic Evaluation of the Dispersion of Carbon Black in Polyolefin Geosynthetics |
ASTM D 6818 : 2021 | Standard Test Method for Tensile Properties of Rolled Erosion Control Products |
ASTM D 7703 : 2022 | Standard Practice for Electrical Leak Location on Exposed Geomembranes Using the Water Lance Method |
ASTM D 6364 : 2006 : R2018 | Standard Test Method for Determining Short-Term Compression Behavior of Geosynthetics |
ASTM D 6496/D6496M : 2023 : REV A | Standard Test Method for Determining Average Bonding Peel Strength Between Top and Bottom Layers of Needle-Punched Geosynthetic Clay Liners |
ASTM D 5681 : 2023 | Standard Terminology for Waste and Waste Management |
ASTM D 8212 : 2024 : EDT 1 | Standard Practice for Determination of the Radial Tensile Properties of Geogrids Under Low Radial Strain |
ASTM D 6567 : 2023 | Standard Test Method for Measuring the Light Penetration of a Rolled Erosion Control Product (RECP) |
ASTM D 1987 : 2022 | Standard Test Method for Biological Clogging of Geotextile, Drainage Geocomposites, or Soil/Geotextile Filters |
ASTM D 7008 : 2008 : R2022 | Standard Specification for Geosynthetic Alternate Daily Covers |
ASTM D 6051 : 2015 : R2023 | Standard Guide for Composite Sampling and Field Subsampling for Environmental Waste Management Activities |
ASTM D 5970/D5970M : 2016 : R2021 | Standard Test Method for Deterioration of Geotextiles from Outdoor Exposure |
ASTM D 6574/D6574M : 2013 : R2021 | Standard Test Method for Determining the (In-Plane) Hydraulic Transmissivity of a Geosynthetic by Radial Flow |
ASTM D 7465/D7465M : 2015 : R2023 | Standard Specification for Ethylene Propylene Diene Terpolymer (EPDM) Sheet Used In Geomembrane Applications |
ASTM D 7178 : 2022 | Standard Practice for Determining the Number of Constrictions “<emph type="ital" >m</emph>” of Non-Woven Geotextiles |
ASTM D 6497/D6497M : 2002 : R2021 | Standard Guide for Mechanical Attachment of Geomembrane to Penetrations or Structures |
ASTM D 6524/D6524M : 2016 : R2021 | Standard Test Method for Measuring the Resiliency of Turf Reinforcement Mats (TRMs) |
ASTM D 7466/D7466M : 2023 | Standard Test Method for Measuring Asperity Height of Textured Geomembranes |
ASTM D 4759 : 2011 : R2018 : EDT 1 | Standard Practice for Determining the Specification Conformance of Geosynthetics |
ASTM D 8172/D8172M : 2018 : R2023 : EDT 1 | Standard Test Method for Shear and Peel Strength of Solvent-Welded Seams with Nonreinforced Geomembranes |
ASTM D 7499/D7499M : 2009 : R2023 | Standard Test Method for Measuring Geosynthetic-Soil Resilient Interface Shear Stiffness |
ASTM D 5885/D5885M : 2020 | Standard Test Method for Oxidative Induction Time of Polyolefin Geosynthetics by High-Pressure Differential Scanning Calorimetry |
ASTM D 4632/D4632M : 2015 : REV A : R2023 | Standard Test Method for Grab Breaking Load and Elongation of Geotextiles |
ASTM D 8551 : 2024 | Standard Practices for Permanent Monitoring Systems for Electrical Leak Detection and Location |
ASTM D 8030/D8030M : 2023 | Standard Practice for Sample Preparation for GCCM |
ASTM D 4886 : 2023 | Standard Test Method for Abrasion Resistance of Geotextiles (Sandpaper/Sliding Block Method) |
ASTM D 7361 : 2007 : R2023 | Standard Test Method for Accelerated Compressive Creep of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method |
ASTM D 6707/D6707M : 2006 : R2019 | Standard Specification for Circular-Knit Geotextile for Use in Subsurface Drainage Applications |
ASTM D 6636 : 2001 : R2023 | Standard Test Method for Determination of Ply Adhesion Strength of Reinforced Geomembranes |
ASTM D 6768/D6768M : 2020 | Standard Test Method for Tensile Strength of Geosynthetic Clay Liners |
ASTM D 7240 : 2018 | Standard Practice for Electrical Leak Location Using Geomembranes with an Insulating Layer in Intimate Contact with a Conductive Layer via Electrical Capacitance Technique (Conductive-Backed Geomembrane Spark Test) |
ASTM D 6392 : 2023 | Standard Test Method for Determining the Integrity of Nonreinforced Geomembrane Seams Produced Using Thermo-Fusion Methods |
ASTM D 5567 : 1994 : R2018 | Standard Test Method for Hydraulic Conductivity Ratio (HCR) Testing of Soil/Geotextile Systems |
ASTM D 5888 : 2019 | Standard Guide for Storage and Handling of Geosynthetic Clay Liners |
ASTM D 6388 : 2018 | Standard Practice for Tests to Evaluate the Chemical Resistance of Geonets to Liquids |
ASTM D 5199 : 2012 : R2019 | Standard Test Method for Measuring the Nominal Thickness of Geosynthetics |
ASTM D 8462 : 2022 | Standard Test Method for Cyclic Plate Load Tests to Evaluate the Structural Performance of Roadway Test Sections with Geosynthetics |
ASTM D 7852 : 2023 | Standard Practice for Use of an Electrically Conductive Geotextile for Leak Location Surveys |
ASTM D 4533/D4533M : 2015 : R2023 | Standard Test Method for Trapezoid Tearing Strength of Geotextiles |
ASTM D 7406 : 2020 | Standard Test Method for Time-Dependent Compressive Deformation Under Constant Pressure for Geosynthetic Drainage Products |
ASTM D 6088 : 2006 : R2022 | Standard Practice for Installation of Geocomposite Pavement Drains |
ASTM D 8480 : 2023 | Standard Test Method for Determining the Tensile Strength of GCCM Materials |
ASTM D 7953 : 2020 | Standard Practice for Electrical Leak Location on Exposed Geomembranes Using the Arc Testing Method |
ASTM D 8364/D8364M : 2021 | Standard Specification for Geosynthetic Cementitious Composite Mat (GCCM) Materials |
ASTM D 6434 : 2012 : R2018 | Standard Guide for the Selection of Test Methods for Flexible Polypropylene Geomembranes |
ASTM D 5820 : 1995 : R2023 | Standard Practice for Pressurized Air Channel Evaluation of Dual-Seamed Geomembranes |
ASTM D 5101 : 2023 | Standard Test Method for Measuring the Filtration Compatibility of Soil-Geotextile Systems |
ASTM D 7408 : 2012 : R2020 | Standard Specification for Non-Reinforced PVC (Polyvinyl Chloride) Geomembrane Seams |
ASTM D 6918 : 2009 : R2022 | Standard Test Method for Testing Vertical Strip Drains in the Crimped Condition |
ASTM D 6243/D6243M : 2020 | Standard Test Method for Determining the Internal and Interface Shear Strength of Geosynthetic Clay Liner by the Direct Shear Method |
ASTM D 7865 : 2013 : R2021 | Standard Guide for Identification, Packaging, Handling, Storage, and Deployment of Fabricated Geomembrane Panels |
ASTM D 4595/D4595M : 2024 | Standard Test Method for Tensile Properties of Geotextiles by the Wide-Width Method |
ASTM D 7007 : 2024 | Standard Practices for Electrical Methods for Locating Leaks in Geomembranes Covered with Water or Earthen Materials |
ASTM D 7001 : 2020 | Standard Specification for Geocomposites for Pavement Edge Drains and Other High-Flow Applications |
ASTM D 7864/D7864M : 2015 : R2023 | Standard Test Method for Determining the Aperture Stability Modulus of Geogrids |
ASTM D 7272 : 2006 : R2023 | Standard Test Method for Determining the Integrity of Seams Used in Joining Geomembranes by Premanufactured Taped Methods |
ASTM D 7613 : 2017 : R2023 | Standard Specification for Flexible Polypropylene Reinforced (fPP-R) and Nonreinforced (fPP) Geomembranes |
ASTM D 7179 : 2018 | Standard Test Method for Determining Geonet Breaking Force |
ASTM D 6454/D6454M : 1999 : R2021 | Standard Test Method for Determining the Short-Term Compression Behavior of Turf Reinforcement Mats (TRMs) |
ASTM D 7749/D7749M : 2011 : R2023 : EDT 1 | Standard Test Method for Determining Integrity of Seams Produced Using Thermo-Fusion Methods for Reinforced Geomembranes by the Grab Method |
ASTM D 6140 : 2022 | Standard Test Method to Determine Asphalt Retention of Paving Fabrics Used in Asphalt Paving for Full-Width Applications |
ASTM D 8263/D8263M : 2023 | Standard Test Method for Determining the Change in Mass of Rolled Erosion Control Products When Submerged in Water |
ASTM D 8058 : 2023 | Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test |
ASTM D 5493 : 2023 | Standard Test Method for Permittivity of Geotextiles Under Load |
ASTM D 7557/D7557M : 2009 : R2021 | Standard Practice for Sampling of Expanded Polystyrene Geofoam Specimens |
ASTM D 6747 : 2021 | Standard Guide for Selection of Techniques for Electrical Leak Location of Leaks in Geomembranes |
ASTM D 4751 : 2021 : REV A | Standard Test Methods for Determining Apparent Opening Size of a Geotextile |
ASTM D 6767 : 2021 | Standard Test Method for Pore Size Characteristics of Geotextiles by Capillary Flow Test |
ASTM D 5641/D5641M : 2016 | Standard Practice for Geomembrane Seam Evaluation by Vacuum Chamber |
ASTM D 7177/D7177M : 2021 | Standard Specification for Air Channel Evaluation of Polyvinyl Chloride (PVC) Dual Track Seamed Geomembranes |
ASTM D 4884/D4884M : 2022 | Standard Test Method for Strength of Sewn or Bonded Seams of Geotextiles |
ASTM D 7700 : 2022 | Standard Guide for Selecting Test Methods for Geomembrane Seams |
ASTM E 2777 : 2020 | Standard Guide for Vegetative (Green) Roof Systems |
ASTM D 5884/D5884M : 2023 | Standard Test Method for Determining Tearing Strength of Internally Reinforced Geomembranes |
ASTM D 7909 : 2021 : REV A | Standard Guide for Placement of Intentional Leaks During Electrical Leak Location Surveys of Geomembranes |
ASTM D 5818 : 2022 | Standard Practice for Exposure and Retrieval of Samples to Evaluate Installation Damage of Geosynthetics |
ASTM D 7106/D7106M : 2005 : R2023 | Standard Guide for Selection of Test Methods for Ethylene Propylene Diene Terpolymer (EPDM) Geomembranes |
ASTM D 6566 : 2018 : R2023 | Standard Test Method for Measuring Mass Per Unit Area of Turf Reinforcement Mats |
ASTM D 5321/D5321M : 2021 | Standard Test Method for Determining the Shear Strength of Soil-Geosynthetic and Geosynthetic-Geosynthetic Interfaces by Direct Shear |
ASTM D 6475 : 2017 | Standard Test Method for Measuring Mass per Unit Area of Erosion Control Blankets |
ASTM D 6241 : 2022 : REV A | Standard Test Method for Measuring Static Puncture Strength of Geotextiles and Geosynthetic-Related Products Using a 50 mm Probe |
ASTM D 6102 : 2023 | Standard Guide for Installation of Geosynthetic Clay Liners |
ASTM D 6365 : 1999 : R2018 | Standard Practice for Nondestructive Testing of Geomembrane Seams Using the Spark Test |
ASTM D 6575/D6575M : 2022 | Standard Test Method for Determining Stiffness of Geosynthetics Used as Turf Reinforcement Mats (TRMs) |
ASTM D 7273/D7273M : 2008 : R2020 | Standard Guide for Acceptance Testing Requirements for Geonets and Geonet Drainage Geocomposites |
ASTM D 7002 : 2022 | Standard Practice for Electrical Leak Location on Exposed Geomembranes Using the Water Puddle Method |
ASTM D 5323 : 2019 : REV A : R2023 | Standard Practice for Determination of 2 % Secant Modulus for Polyethylene Geomembranes |
ASTM D 4716/D4716M : 2022 | Standard Test Method for Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head |
ASTM D 5496 : 2015 : R2020 | Standard Practice for In-Field Immersion Testing of Geosynthetics |
ASTM D 5322 : 2023 | Standard Practice for Laboratory Immersion Procedures for Evaluating the Chemical Resistance of Geosynthetics to Liquids |
ASTM D 4833/D4833M : 2007 : R2020 | Standard Test Method for Index Puncture Resistance of Geomembranes and Related Products |
ASTM D 6638 : 2018 | Standard Test Method for Determining Connection Strength Between Geosynthetic Reinforcement and Segmental Concrete Units (Modular Concrete Blocks) |
ASTM D 8269 : 2021 | Standard Guide for the Use of Geocells in Geotechnical and Roadway Projects |
ASTM D 5141 : 2023 | Standard Test Method for Determining Filtering Efficiency and Flow Rate of the Filtration Component of a Sediment Retention Device |
ASTM D 8265 : 2023 | Standard Practices for Electrical Methods for Mapping Leaks in Installed Geomembranes |
ASTM D 5261 : 2010 : R2018 | Standard Test Method for Measuring Mass per Unit Area of Geotextiles |
ASTM D 7737/D7737M : 2015 : R2023 | Standard Test Method for Individual Geogrid Junction Strength |
ASTM D 8173 : 2023 | Standard Guide for Site Preparation, Layout, Installation, and Hydration of Geosynthetic Cementitious Composite Mats |
ASTM D 4594/D4594M : 1996 : R2020 | Standard Test Method for Effects of Temperature on Stability of Geotextiles |
ASTM D 5819 : 2022 | Standard Guide for Selecting Test Methods for Experimental Evaluation of Geosynthetic Durability |
ASTM D 6992 : 2016 : R2023 | Standard Test Method for Accelerated Tensile Creep and Creep-Rupture of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method |
ASTM D 7275 : 2007 : R2018 | Standard Test Method for Tensile Properties of Bituminous Geomembranes (BGMs) |
ASTM D 5994/D5994M : 2010 : R2021 | Standard Test Method for Measuring Core Thickness of Textured Geomembranes |
ASTM D 2643/D2643M : 2021 | Standard Specification for Prefabricated Bituminous Geomembrane Used as Canal and Ditch Liner (Exposed Type) |
ASTM D 6766 : 2020 : REV A | Standard Test Method for Evaluation of Hydraulic Properties of Geosynthetic Clay Liners Permeated with Potentially Incompatible Aqueous Solutions |
ASTM D 5889/D5889M : 2018 : R2022 | Standard Practice for Quality Control of Geosynthetic Clay Liners |
ASTM D 7747/D7747M : 2011 : R2023 | Standard Test Method for Determining Integrity of Seams Produced Using Thermo-Fusion Methods for Reinforced Geomembranes by the Strip Tensile Method |
ASTM D 5747/D5747M : 2021 | Standard Practice for Tests to Evaluate the Chemical Resistance of Geomembranes to Liquids |
ASTM D 7880/D7880M : 2022 | Standard Test Method for Determining Flow Rate of Water and Suspended Solids Retention from a Closed Geosynthetic Bag |
ASTM D 4873/D4873M : 2017 : R2021 | Standard Guide for Identification, Storage, and Handling of Geosynthetic Rolls and Samples |
ASTM D 5397 : 2020 | Standard Test Method for Evaluation of Stress Crack Resistance of Polyolefin Geomembranes Using Notched Constant Tensile Load Test |
ASTM D 7239 : 2013 : R2023 | Standard Specification for Hybrid Geosynthetic Paving Mat for Highway Applications |
ASTM D 5514/D5514M : 2018 | Standard Test Method for Large-Scale Hydrostatic Puncture Testing of Geosynthetics |
ASTM D 4354 : 2012 : R2020 | Standard Practice for Sampling of Geosynthetics and Rolled Erosion Control Products (RECPs) for Testing |
ASTM D 7176 : 2022 | Standard Specification for Non-Reinforced Polyvinyl Chloride (PVC) Geomembranes Used in Buried Applications |
ASTM D 5262 : 2021 | Standard Test Method for Determining the Unconfined Tension Creep and Creep Rupture Behavior of Planar Geosynthetics Used for Reinforcement Purposes |
ASTM D 7180/D7180M : 2005 : R2021 | Standard Guide for Use of Expanded Polystyrene (EPS) Geofoam in Geotechnical Projects |
ASTM D 6214/D6214M : 2023 | Standard Test Method for Determining the Integrity of Field Seams Used in Joining Geomembranes by Chemical Fusion Methods |
ASTM D 7982 : 2015 : R2021 | Standard Practice for Testing of Factory Thermo-Fusion Seams for Fabricated Geomembrane Panels |
ASTM D 5886 : 1995 : R2023 | Standard Guide for Selection of Test Methods to Determine Rate of Fluid Permeation Through Geomembranes for Specific Applications |
ASTM D 7853 : 2013 : R2020 | Standard Test Method for Hydraulic Pullout Resistance of a Geomembrane with Locking Extensions Embedded in Concrete |
ASTM D 7274 : 2006 : REV A : R2018 : EDT 1 | Standard Test Method for Mineral Stabilizer Content of Prefabricated Bituminous Geomembranes (PBGMs) |
ASTM D 7702/D7702M : 2014 : R2021 | Standard Guide for Considerations When Evaluating Direct Shear Results Involving Geosynthetics |
ASTM D 7003/D7003M : 2003 : R2021 | Standard Test Method for Strip Tensile Properties of Reinforced Geomembranes |
ASTM D 8425 : 2022 | Standard Guide for the Use of Sodium Bentonite Needle-Punched Geotextile Waterproofing Systems with Cast-in-Place Concrete Below-Grade Foundation Construction |
ASTM D 8203 : 2018 : R2023 | Standard Test Method for Determination of the Horizontal Water Flow Rate of a Geosynthetic Screening Material, Product, or Device |
ASTM D 6244 : 2006 : R2018 | Standard Test Method for Vertical Compression of Geocomposite Pavement Panel Drains |
ASTM D 6706 : 2001 : R2021 | Standard Test Method for Measuring Geosynthetic Pullout Resistance in Soil |
ASTM D 6916 : 2018 | Standard Test Method for Determining the Shear Strength Between Segmental Concrete Units (Modular Concrete Blocks) |
ASTM D 4491/D4491M : 2022 | Standard Test Methods for Water Permeability of Geotextiles by Permittivity |
ASTM D 7005/D7005M : 2016 : R2024 | Standard Test Method for Determining the Bond Strength (Ply Adhesion) of Geocomposites |
ASTM D 5887/D5887M : 2023 | Standard Test Method for Measurement of Index Flux Through Saturated Geosynthetic Clay Liner Specimens Using a Flexible Wall Permeameter |
ASTM D 6817/D6817M : 2017 : R2021 | Standard Specification for Rigid Cellular Polystyrene Geofoam |
ASTM D 6072/D6072M : 2019 : EDT 1 | Standard Practice for Obtaining Samples of Geosynthetic Clay Liners |
ASTM D 5721 : 2022 | Standard Practice for Air-Oven Aging of Polyolefin Geomembranes |
ASTM D 6455 : 2011 : R2018 | Standard Guide for the Selection of Test Methods for Prefabricated Bituminous Geomembranes (PBGMs) |
ASTM D 8117 : 2021 | Standard Test Method for Oxidative Induction Time of Polyolefin Geosynthetics by Differential Scanning Calorimetry |
ASTM D 4885 : 2001 : R2023 | Standard Test Method for Determining Performance Strength of Geomembranes by the Wide Strip Tensile Method |
ASTM D 6141 : 2018 : R2022 | Standard Guide for Screening Clay Portion and Index Flux of Geosynthetic Clay Liner (GCL) for Chemical Compatibility to Liquids |
ASTM D 6213 : 2017 | Standard Practice for Tests to Evaluate the Chemical Resistance of Geogrids to Liquids |
ASTM D 7556 : 2010 : R2019 | Standard Test Methods for Determining Small-Strain Tensile Properties of Geogrids and Geotextiles by In-Air Cyclic Tension Tests |
ASTM D 8329 : 2021 | Standard Test Method for Determination of Water/Cementitious Materials Ratio for Geosynthetic Cementitious Composite Mats (GCCMs) and Measurement of the Compression Strength of the Cementitious Material Contained Within |
ASTM D 7407 : 2007 : R2020 | Standard Guide for Determining the Transmission of Gases Through Geomembranes |
ASTM D 8204 : 2018 : R2022 | Standard Practice for Burial and Retrieval of Samples in a Test Pad to Evaluate Installation Effects on Geosynthetic Clay Liners |
ASTM D 8490 : 2023 : REV A | Standard Test Method for Determining the Pore Size Characteristics of Geotextiles Using an Optical Method |
ASTM D 6693/D6693M : 2020 | Standard Test Method for Determining Tensile Properties of Nonreinforced Polyethylene and Nonreinforced Flexible Polypropylene Geomembranes |
ASTM D 5617 : 2023 | Standard Test Method for Multi-Axial Elongation of Geomembranes |
ASTM D 7004/D7004M : 2003 : R2021 | Standard Test Method for Grab Tensile Properties of Reinforced Geomembranes |
ASTM D 8057 : 2017 | Standard Specification for Inlet Filters with a Rigid Frame |
ASTM D 5514/D5514M : 2024 | Standard Test Methods for Large-Scale Hydrostatic Puncture Testing of Geosynthetics |
€58.78
Excluding VAT
EUR
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.