ASTM D 4441 : 2015
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Aqueous Dispersions of Polytetrafluoroethylene
Hardcopy , PDF
23-08-2023
English
01-05-2015
This specification covers aqueous dispersions of polytetrafluoroethylene (PTFE) resins.
Committee |
D 20
|
DocumentType |
Standard
|
Pages |
6
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This specification covers aqueous dispersions of polytetrafluoroethylene (PTFE) resins. These resins are homopolymers of tetrafluoroethylene, or in some cases modified homopolymers containing not more than 1 % by weight of other fluoromonomers.
1.1.1The dispersion is usually stabilized by one or more surfactants. Other non-PTFE materials may be present in total at 5 % or less by weight for special purposes.
1.1.2This specification is for virgin material only and does not address recycled material as it is not appropriate for dispersions.
1.2This specification is used to determine if a shipment, lot, or container of PTFE dispersion is suitable for its intended use. It covers only aqueous dispersions of polytetrafluoroethylene. It does not cover PTFE copolymers or filled dispersions. This specification includes test methods for both aqueous dispersion and the PTFE in the dispersion.
Note 1:Uses for the PTFE dispersion covered by this specification include, but are not limited to, casting of their films, impregnation of mechanical packings and other materials, surface coatings on various substrates, combined impregnation and coating of fibrous materials, and co-coagulation with other materials for subsequent processing into films, sheets, rods, and tubes.
Note 2:Information in this specification is technically equivalent to related information in ISO 12086-1 and ISO 12086-2.
1.3The values stated in SI units as detailed in IEEE/ASTM SI-10 are to be regarded as standard. The values given in parentheses are for information only.
1.4The following precautionary caveat pertains only to the test method portions of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific precautionary information is given in Notes 5 and 6.
ASTM D 4895 : 2018 | Standard Specification for Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion |
ASTM D 4894 : 2019 | Standard Specification for Polytetrafluoroethylene (PTFE) Granular Molding and Ram Extrusion Materials |
ASTM D 4464 : 2000 | Standard Test Method for Particle Size Distribution of Catalytic Material by Laser Light Scattering |
ASTM D 4894 : 1998 : REV A | Standard Specification for Polytetrafluoroethylene (PTFE) Granular Molding and Ram Extrusion Materials |
ASTM D 4464 : 2015 | Standard Test Method for Particle Size Distribution of Catalytic Materials by Laser Light Scattering |
ASTM D 4894 : 2007 | Standard Specification for Polytetrafluoroethylene (PTFE) Granular Molding and Ram Extrusion Materials |
ASTM D 3892 : 1993 : R2003 | Standard Practice for Packaging/Packing of Plastics |
ASTM D 4464 : 2015 : R2020 | Standard Test Method for Particle Size Distribution of Catalytic Materials by Laser Light Scattering |
ASTM D 3892 : 1993 : R1998 | Standard Practice for Packaging/Packing of Plastics |
ASTM D 4591 : 2001 | Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry |
ASTM D 4895 : 1998 | Standard Specification for Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion |
ASTM D 4591 : 2007 | Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry |
ASTM D 4591 : 2007 : R2012 | Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry |
ASTM D 4591 : 1997 | Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry |
ASTM D 4591 : 2017 | Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry |
ASTM D 4894 : 2004 | Standard Specification for Polytetrafluoroethylene (PTFE) Granular Molding and Ram Extrusion Materials |
ASTM D 4895 : 2018 | Standard Specification for Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion |
ASTM D 4464 : 2010 | Standard Test Method for Particle Size Distribution of Catalytic Material by Laser Light Scattering |
ASTM D 4895 : 2004 | Standard Specification for Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion |
ASTM D 4894 : 2015 | Standard Specification for Polytetrafluoroethylene (PTFE) Granular Molding and Ram Extrusion Materials |
ASTM D 4464 : 2000 : R2005 | Standard Test Method for Particle Size Distribution of Catalytic Material by Laser Light Scattering |
ASTM D 4894 : 2019 | Standard Specification for Polytetrafluoroethylene (PTFE) Granular Molding and Ram Extrusion Materials |
ASTM D 4894 : 2007 : R2012 | Standard Specification for Polytetrafluoroethylene (PTFE) Granular Molding and Ram Extrusion Materials |
ASTM D 3892 : 1993 : R2009 | Standard Practice for Packaging/Packing of Plastics |
ASTM D 4895 : 2016 | Standard Specification for Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion |
ASTM D 4895 : 2010 | Standard Specification for Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion |
ASTM D 4895 : 2015 | Standard Specification for Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.