ASTM D 2901 : 1999
|
Standard Test Method for Cement Content of Freshly Mixed Soil-Cement (Withdrawn 2006) |
ASTM D 1561/D1561M : 2013 : REDLINE
|
Standard Practice for Preparation of Bituminous Mixture Test Specimens by Means of California Kneading Compactor |
ASTM D 7928 : 2017 : REDLINE
|
Standard Test Method for Particle-Size Distribution (Gradation) of Fine-Grained Soils Using the Sedimentation (Hydrometer) Analysis |
ASTM D 7181 : 2011
|
Method for Consolidated Drained Triaxial Compression Test for Soils |
ASTM D 4253 : 2016 : REDLINE
|
Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table |
ASTM D 6276 : 1999 : REV A
|
Standard Test Method for Using pH to Estimate the Soil-Lime Proportion Requirement for Soil Stabilization |
ASTM D 854 : 2014 : REDLINE
|
Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer (Withdrawn 2023) |
ASTM D 1074 : 2017 : REDLINE
|
Standard Test Method for Compressive Strength of Asphalt Mixtures |
ASTM D 7263 : 2009 : R2018 : EDT 1
|
Standard Test Methods for Laboratory Determination of Density (Unit Weight) of Soil Specimens |
ASTM D 1188 : 2007 : R2015
|
Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Coated Samples |
ASTM D 6704 : 2008 : R2015
|
Standard Test Method for Determining the Workability of Asphalt Cold Mix Patching Material |
ASTM D 2974 : 2014 : REDLINE
|
Standard Test Methods for Moisture, Ash, and Organic Matter of Peat and Other Organic Soils |
ASTM D 6527 : 2000
|
Standard Test Method for Determining Unsaturated and Saturated Hydraulic Conductivity in Porous Media by Steady-State Centrifugation |
ASTM D 7063 : 2005
|
Standard Test Method for Effective Porosity and Effective Air Voids of Compacted Bituminous Paving Mixture Samples |
ASTM D 2977 : 2014
|
Standard Practice for Particle Size Range of Peat Materials for Horticultural Purposes |
ASTM D 4511 : 2011 : REDLINE
|
Standard Test Method for Hydraulic Conductivity of Essentially Saturated Peat |
ASTM D 698 : 2013-05
|
TEST METHODS FOR LABORATORY COMPACTION CHARACTERISTICS OF SOIL USING STANDARD EFFORT (12400 FT-LBF/FT[3] (600 KN-M/M[3])) |
ASTM D 4612 : 2016 : REDLINE
|
Standard Test Method for Calculating Thermal Diffusivity of Rock and Soil |
ASTM D 1140 : 2017 : REDLINE
|
Standard Test Methods for Determining the Amount of Material Finer than 75-μm (No. 200) Sieve in Soils by Washing |
ASTM D 1561 : 1992 : R2000
|
Standard Practice for Preparation of Bituminous Mixture Test Specimens by Means of California Kneading Compactor |
ASTM D 425 : 2017 : REDLINE
|
Standard Test Method for Centrifuge Moisture Equivalent of Soils |
ASTM D 5298 : 2016 : REDLINE
|
Standard Test Method for Measurement of Soil Potential (Suction) Using Filter Paper |
ASTM D 1557 : 2012
|
Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3 (2,700 kN-m/m3)) |
ASTM D 3744 : 2003
|
Standard Test Method for Aggregate Durability Index |
ASTM D 7263 : 2009
|
Standard Test Methods for Laboratory Determination of Density (Unit Weight) of Soil Specimens |
ASTM D 4914/D4914M : 2016 : REDLINE
|
Standard Test Methods for Density of Soil and Rock in Place by the Sand Replacement Method in a Test Pit |
ASTM D 1633 : 2017
|
Standard Test Methods for Compressive Strength of Molded Soil-Cement Cylinders |
ASTM D 6925 : 2015 : REDLINE
|
Standard Test Method for Preparation and Determination of the Relative Density of Asphalt Mix Specimens by Means of the Superpave Gyratory Compactor |
ASTM D 5030 : 2004
|
Standard Test Method for Density of Soil and Rock in Place by the Water Replacement Method in a Test Pit |
ASTM D 6276 : 1999 : REV A : R2006
|
Standard Test Method for Using pH to Estimate the Soil-Lime Proportion Requirement for Soil Stabilization |
ASTM D 4373 : 2014 : REDLINE
|
Standard Test Method for Rapid Determination of Carbonate Content of Soils |
ASTM D 4254 : 2016 : REDLINE
|
Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density |
ASTM D 4644 : 2016 : REDLINE
|
Standard Test Method for Slake Durability of Shales and Other Similar Weak Rocks |
ASTM D 5982 : 2015 : REDLINE
|
Standard Test Method for Determining Cement Content of Fresh Soil-Cement (Heat of Neutralization Method) |
ASTM D 6913 : 2004
|
Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis |
ASTM D 5334 : 2014 : REDLINE
|
Standard Test Method for Determination of Thermal Conductivity of Soil and Soft Rock by Thermal Needle Probe Procedure |
ASTM D 5313 : 2004
|
Standard Test Method for Evaluation of Durability of Rock for Erosion Control Under Wetting and Drying Conditions |
ASTM D 6913 : 2004 : R2009 : EDT 1
|
Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis |
ASTM D 4944 : 2018 : REDLINE
|
Standard Test Method for Field Determination of Water (Moisture) Content of Soil by the Calcium Carbide Gas Pressure Tester |
ASTM D 5779/D5779M : 2014 : REDLINE
|
Standard Test Method for Field Determination of Rapid Specific Gravity of Rock and Manmade Materials for Erosion Control |
ASTM D 1557 : 2012 : EDT 1
|
Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3 (2,700 kN-m/m3)) |
ASTM D 1883 : 2016 : REDLINE
|
Standard Test Method for California Bearing Ratio (CBR) of Laboratory-Compacted Soils |
ASTM D 6128 : 2016 : REDLINE
|
Standard Test Method for Shear Testing of Bulk Solids Using the Jenike Shear Tester |
ASTM D 427 : 2004
|
Test Method for Shrinkage Factors of Soils by the Mercury Method (Withdrawn 2008) |
ASTM D 7481 : 2018
|
Standard Test Methods for Determining Loose and Tapped Bulk Densities of Powders using a Graduated Cylinder |
ASTM D 5268 : 2013 : REDLINE
|
Standard Specification for Topsoil Used for Landscaping Purposes |
ASTM D 5312/D5312M : 2012
|
Standard Test Method for Evaluation of Durability of Rock for Erosion Control Under Freezing and Thawing Conditions |
ASTM D 2973 : 2016 : REDLINE
|
Standard Test Method for Total Nitrogen in Peat Materials |
ASTM D 6627/D6627M : 2011 : R2016
|
Standard Test Method for Determination of a Volatile Distillate Fraction of Cold Asphalt Mixtures |
ASTM D 5240/D5240M : 2013-05
|
STANDARD TEST METHOD FOR EVALUATION OF DURABILITY OF ROCK FOR EROSION CONTROL USING SODIUM SULFATE OR MAGNESIUM SULFATE |
ASTM D 1188 : 2007 : EDT 1
|
Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Coated Samples |
ASTM D 5887/D5887M : 2016 : REDLINE
|
Standard Test Method for Measurement of Index Flux Through Saturated Geosynthetic Clay Liner Specimens Using a Flexible Wall Permeameter |
ASTM D 3155 : 2011 : REDLINE
|
Standard Test Method for Lime Content of Uncured Soil-Lime Mixtures |
ASTM D 7626 : 2010
|
Standard Test Methods for Determining the Organic Treat Loading of Organophilic Clay |
ASTM D 7481 : 2009
|
Standard Test Methods for Determining Loose and Tapped Bulk Densities of Powders using a Graduated Cylinder (Withdrawn 2018) |
ASTM D 6913/D6913M : 2017 : REDLINE
|
Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis |
ASTM D 2850 : 2015 : REDLINE
|
Standard Test Method for Unconsolidated-Undrained Triaxial Compression Test on Cohesive Soils |
ASTM D 7370/D7370M : 2014 : REDLINE
|
Standard Test Method for Determination of Relative Density and Absorption of Fine, Coarse and Blended Aggregate Using Combined Vacuum Saturation and Rapid Submersion |
TP 117 : 2015
|
METHOD OF TEST FOR DETERMINATION OF THE VOIDS OF DRY COMPACTED FILLER |
ASTM D 546 : 2017 : REDLINE
|
Standard Test Method for Sieve Analysis of Mineral Filler for Asphalt Paving Mixtures |
ASTM D 558 : 2011 : REDLINE
|
Standard Test Methods for Moisture-Density (Unit Weight) Relations of Soil-Cement Mixtures |
ASTM D 559/D559M : 2015
|
Standard Test Methods for Wetting and Drying Compacted Soil-Cement Mixtures |
ASTM D 1561 : 1992 : R2005
|
Standard Practice for Preparation of Bituminous Mixture Test Specimens by Means of California Kneading Compactor |
ASTM D 6773 : 2016 : REDLINE
|
Standard Test Method for Bulk Solids Using Schulze Ring Shear Tester |
ASTM D 6276 : 1999 : REV A : R2006 : EDT 1
|
Standard Test Method for Using pH to Estimate the Soil-Lime Proportion Requirement for Soil Stabilization (Withdrawn 2015) |
ASTM D 6836 : 2016 : REDLINE
|
Standard Test Methods for Determination of the Soil Water Characteristic Curve for Desorption Using Hanging Column, Pressure Extractor, Chilled Mirror Hygrometer, or Centrifuge |
ASTM D 7100 : 2011 : REDLINE
|
Standard Test Method for Hydraulic Conductivity Compatibility Testing of Soils with Aqueous Solutions |
ASTM D 6913 : 2004 : EDT 2
|
Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis |
ASTM D 6913 : 2004 : R2009
|
Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis |
ASTM D 3042 : 2017 : REDLINE
|
Standard Test Method for Insoluble Residue in Carbonate Aggregates |
ASTM D 7560 : 2016
|
Standard Test Method for Determination of Fiber Length Percentages in Hydraulic Erosion Control Products (HECPs) |
ASTM D 2435/D2435M : 2011 : REDLINE
|
Standard Test Methods for One-Dimensional Consolidation Properties of Soils Using Incremental Loading |
ASTM D 2041 : 2003 : REV A
|
Standard Test Method for Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures |
ASTM D 3080/D3080M : 2011 : REDLINE
|
Standard Test Method for Direct Shear Test of Soils Under Consolidated Drained Conditions (Withdrawn 2020) |
ASTM D 6473 : 2015 : REDLINE
|
Standard Test Method For Specific Gravity And Absorption of Rock For Erosion Control |
ASTM D 560 : 2003
|
Standard Test Methods for Freezing and Thawing Compacted Soil-Cement Mixtures (Withdrawn 2012) |
ASTM D 806 : 2011 : REDLINE
|
Standard Test Method for Cement Content of Hardened Soil-Cement Mixtures |
ASTM D 560/D560M : 2016 : REDLINE
|
Standard Test Methods for Freezing and Thawing Compacted Soil-Cement Mixtures |
ASTM D 5856 : 2015 : REDLINE
|
Standard Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter |
ASTM D 4643 : 2017 : REDLINE
|
Standard Test Method for Determination of Water Content of Soil and Rock by Microwave Oven Heating |
ASTM D 6627/D6627M : 2011
|
Standard Test Method for Determination of a Volatile Distillate Fraction of Cold Asphalt Mixtures |
ASTM D 7262 : 2010 : R2016 : EDT 1
|
Standard Test Method for Estimating the Permanganate Natural Oxidant Demand of Soil and Aquifer Solids |
ASTM D 7760 : 2018 : REDLINE
|
Standard Test Method for Measurement of Hydraulic Conductivity of Materials Derived from Scrap Tires Using a Rigid Wall Permeameter |
ASTM D 5240 : 2004
|
Standard Test Method for Testing Rock Slabs to Evaluate Soundness of Riprap by Use of Sodium Sulfate or Magnesium Sulfate |
ASTM D 7263 : 2009 : R2018
|
Standard Test Methods for Laboratory Determination of Density (Unit Weight) of Soil Specimens |
ASTM D 1754/D1754M : 2009 : R2014
|
Standard Test Method for Effects of Heat and Air on Asphaltic Materials (Thin-Film Oven Test) |
ASTM D 6539 : 2013 : REDLINE
|
Standard Test Method for Measurement of the Permeability of Unsaturated Porous Materials by Flowing Air |
ASTM D 6780/D6780M : 2012 : REDLINE
|
Standard Test Method for Water Content and Density of Soil In situ by Time Domain Reflectometry (TDR) |
ASTM D 6780 : 2005
|
Standard Test Method for Water Content and Density of Soil in Place by Time Domain Reflectometry (TDR) |
ASTM D 7262 : 2010
|
Standard Test Method for Estimating the Permanganate Natural Oxidant Demand of Soil and Aquifer Solids |
ASTM D 2167 : 2015 : REDLINE
|
Standard Test Method for Density and Unit Weight of Soil in Place by the Rubber Balloon Method |
AASHTO TP 91 : 2015
|
METHOD OF TEST FOR DETERMINING ASPHALT BINDER BOND STRENGTH BY MEANS OF THE ASPHALT BOND STRENGTH (ABS) TEST |
ASTM D 4767 : 2011 : REDLINE
|
Standard Test Method for Consolidated Undrained Triaxial Compression Test for Cohesive Soils |
ASTM D 8106 : 2017
|
Standard Test Methods for Determining the Oil Sorption Capacity of Organophilic Clay |
ASTM D 1632 : 2017
|
Standard Practice for Making and Curing Soil-Cement Compression and Flexure Test Specimens in the Laboratory |
ASTM D 4829 : 2011 : REDLINE
|
Standard Test Method for Expansion Index of Soils |
ASTM D 1754/D1754M : 2009
|
Standard Test Method for Effect of Heat and Air on Asphaltic Materials (Thin-Film Oven Test) |
ASTM D 2041 : 2003
|
Standard Test Method for Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures |
ASTM D 5550 : 2014 : REDLINE
|
Standard Test Method for Specific Gravity of Soil Solids by Gas Pycnometer |
ASTM D 559 : 2003
|
Standard Test Methods for Wetting and Drying Compacted Soil-Cement Mixtures (Withdrawn 2012) |
ASTM D 6766 : 2018 : REDLINE
|
Standard Test Method for Evaluation of Hydraulic Properties of Geosynthetic Clay Liners Permeated with Potentially Incompatible Aqueous Solutions |
ASTM D 6913 : 2004 : EDT 1
|
Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis |
ASTM D 4959 : 2016 : REDLINE
|
Standard Test Method for Determination of Water Content of Soil By Direct Heating |
ASTM D 3080 : 2004
|
Standard Test Method for Direct Shear Test of Soils Under Consolidated Drained Conditions |
ASTM D 6527 : 2000 : R2008
|
Standard Test Method for Determining Unsaturated and Saturated Hydraulic Conductivity in Porous Media by Steady-State Centrifugation (Withdrawn 2017) |
ASTM D 1188 : 2007
|
Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Coated Samples |
ASTM D 6704 : 2008
|
Standard Test Method for Determining the Workability of Asphalt Cold Mix Patching Material |
ASTM D 1561 : 1992 : R2005 : EDT 1
|
Standard Practice for Preparation of Bituminous Mixture Test Specimens by Means of California Kneading Compactor |
ASTM D 6390 : 2011
|
Standard Test Method for Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures |
ASTM D 6390 : 2011 : R2017
|
Standard Test Method for Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures |
ASTM D 7172 : 2014 : REDLINE
|
Standard Test Method for Determining the Relative Density (Specific Gravity) and Absorption of Fine Aggregates Using Infrared |
ASTM D 4647/D4647M : 2013 : REDLINE
|
Standard Test Methods for Identification and Classification of Dispersive Clay Soils by the Pinhole Test |