ASTM D 476 : 2015 : REDLINE
Current
Current
The latest, up-to-date edition.
Standard Classification for Dry Pigmentary Titanium Dioxide Products
Available format(s)
PDF
Language(s)
English
Published date
01-02-2015
Important note : Users cannot be edited or removed once added to your Multi user PDF.CONTAINED IN VOL. 06.03, 2017 Defines eight types of dry pigmentary titanium dioxide products, grouped by composition, typical end use application, and some performance properties.
| Committee |
D 01
|
| DevelopmentNote |
Supersedes ASTM D 382, ASTM D 384 and ASTM D 442. (02/2002)
|
| DocumentType |
Redline
|
| Pages |
3
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
1.1This classification describes eight types of dry pigmentary titanium dioxide products, grouped by composition, typical end use application, and some performance properties.
1.2The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
| DOD-E-18214 Revision B:1978 | ENAMEL, INTERIOR, DECK, DARK GREEN (FORMULA NO. 19) (METRIC) |
| MIL-DTL-1115 Revision E:2010 | ENAMEL, INTERIOR, ALKYD, WHITE (FORMULA NO. 30) |
| DOD-E-1265 Revision D:1977 | ENAMEL, EXTERIOR, ALKYD, OCEAN GRAY No.17 (FORMULA No 5.0) METRIC |
| MIL-E-52891 Revision B:1988 | ENAMEL, LUSTERLESS, ZINC PHOSPHATE, STYRENATED ALKYD TYPE |
| MIL C 53039 : A | COATING, ALIPHATIC POLYURETHANE, SINGLE COMPONENT, CHEMICAL AGENT RESISTANT |
| DOD E 24635 : (1) | ENAMEL, GRAY, SILICONE ALKYD COPOLYMER SEMIGLOSS (FOR EXTERIOR USE) (METRIC) |
| MIL-E-19603 Revision C:1974 | ENAMEL, BAKING, FOR ROLLER COAT APPLICATION |
| MIL-DTL-24631 Revision A:1997 | PAINT, CAMOUFLAGE FOR SUBMARINES, GENERAL SPECIFICATION FOR (METRIC) |
| MIL-DTL-700 Revision B:1998 | ENAMEL, DECK, INTERIOR, GRAY, (FORMULA NO. 20L) (METRIC) |
| MIL-C-46168 Revision D:1987 | COATING, ALIPHATIC POLYURETHANE, CHEMICAL AGENT RESISTANT |
| MIL P 85582 : B | PRIMER COATINGS: EPOXY, WATERBORNE |
| MIL P 24441/25 : 0 | PAINT, EPOXY-POLYAMIDE, DARK GRAY Ro6, FORMULA 155, TYPE III |
| TT-P-645 Revision C:2013 | PAINT, ALKYD TYPE, FORMULA NUMBER 84 |
| ASTM D 963 : 1981 : R1986 : EDT 1 | Specification for Copper Phthalcoyanine Blue Pigment |
| MIL-E-46096 Revision C:1973 | ENAMEL, LUSTRELESS, QUICK DRYING, STYRENATED ALKYD TYPE, SOLAR HEAT REFLECTING |
| TT-E-527 Revision D:1988 | ENAMEL, ALKYD, LUSTERLESS, LOW VOC CONTENT |
| MIL-P-24351 Revision A:1985 | PRIMER COATING, ALKYD, BLUE (FORMULA NO. 6N35-2) |
| MIL E 15090 : C | ENAMEL, EQUIPMENT, LIGHT GRAY (FORMULA NO. 111) |
| MIL-P-28642 Base Document:1977 | PAINT (TOPCOAT), VINYL CHLORIDE ACETATE COPOLYMER, HIGH BUILD (FOR STEEL AND MASONRY) |
| MIL P 24441/26 : 0 | PAINT, EPOXY-POLYAMIDE, RED, FORMULA 156, TYPE III |
| MIL-S-15191 Revision C:1986 | SILICA, DIATOMACEOUS, UNCALCINED |
| MIL-PRF-32348 Base Document:2010 | POWDER COATING, CAMOUFLAGE CHEMICAL AGENT RESISTANT SYSTEMS |
| SAE AMSP21600A | Paint System, Fluorescent, Removable, for Aircraft Application |
| TT-E-506 Revision K:1977 | ENAMEL, ALKYD, GLOSS, TINTS AND WHITE (FOR INTERIOR USE) |
| TT-E-001793 Base Document:1972 | ENAMEL, SEMI-GLOSS, FOR METAL AND WOOD FURNITURE |
| TT-P-1565 Revision B:1978 | PAINT, BOOT TOPPING BLACK |
| MIL P 24441/30 : 0 | PAINT, EPOXY-POLYAMIDE, HAZE GRAY, FORMULA 151, TYPE IV |
| TT-P-1510 Revision A:1975 | PAINT, LATEX, EXTERIOR, FOR WOOD SURFACES, WHITE AND TINTS |
| TT-E-490 Revision E:1975 | ENAMEL, SILICONE ALKYD COPOLYMER, SEMIGLOSS (FOR EXTERIOR & INTERIOR NON RESIDENTIAL USE) |
| MIL E 11195 : E | ENAMEL, LUSTERLESS, FAST DRY, VOC COMPLAINT |
| MIL L 46171 : NOTICE 1 | LACQUER, LUSTRELESS, HOT SPRAY FOR TIP IDENTIFICATION OF AMMUNITION (FOR PROCUREMENT USE MIL-L-1195) |
| DOD E 1115 : C | ENAMEL, INTERIOR, ALKYD, WHITE [FORMULA NO.30] METRIC |
| TT-E-489 Revision J:1994 | ENAMEL, ALKYD, GLOSS, (FOR EXTERIOR AND INTERIOR SURFACES) |
| MIL L 11195 : D | LACQUER, LUSTRELESS, HOT SPRAY |
| MIL-C-29475 Base Document:1994 | COATING, WATER BORNE POLYURETHANE CAMOUFLAGE |
| ASTM D 4302 : 2014 : REDLINE | Standard Specification for Artists’ Oil, Resin-Oil, and Alkyd Paints |
| ASTM D 868 : 2010 : R2015 | Standard Practice for Determination of Degree of Bleeding of Traffic Paint |
| AASHTO M 248 : 1991 | SPECIFICATION FOR READY-MIXED WHITE AND YELLOW TRAFFIC PAINTS |
| MIL P 24441/28 : 0 | PAINT, EPOXY-POLYAMIDE, YELLOW, FORMULA 158, TYPE III |
| MIL P 24441/37 : 1991 | PAINT, EPOXY-POLYAMIDE, YELLOW, FORMULA 158, TYPE IV |
| MIL P 24441/20 : 0 | PAINT, EPOXY-POLYAMIDE, GREEN PRIMER, FORMULA 150, TYPE III |
| MIL P 24441/23 : 1991 | PAINT, EPOXY-POLYAMIDE, DARK GRAY, FORMULA 153, TYPE III |
| MIL P 24441/24 : 0 | PAINT, EPOXY-POLYAMIDE, DARK GRAY Ro3.6, FORMULA 154, TYPE III |
| MIL P 24441/35 : 1991 | PAINT, EPOXY-POLYAMIDE, RED, FORMULA 156, TYPE IV |
| ASTM D 868 : 2010 | Standard Practice for Determination of Degree of Bleeding of Traffic Paint |
| MIL-DTL-15090 Revision E:2010 | ENAMEL, EQUIPMENT, LIGHT GRAY, (NAVY FORMULA NO. 111) |
| MIL C 46127 : A | COATING, GRAY, UNDERCOAT (SOLAR HEAT REFLECTING) |
| TT P 25 : F NOTICE 1 | PRIMER COATING, EXTERIOR UNDERCOAT FOR WOOD, READY-MIXED, WHITE AND TINTS |
| TT-E-508 Revision C:1977 | ENAMEL, INTERIOR SEMIGLOSS, TINTS AND WHITES |
| ASTM D 3288 : 2003 | Standard Test Methods for Magnet-Wire Enamels |
| MIL-E-52798 Revision A:1976 | ENAMEL, ALKYD CAMOUFLAGE |
| MIL H 53095 : A | HOSE ASSEMBLIES, RUBBER, SYNTHETIC, LIQUID PETROLEUM FUELS, DISPENSING, COLLAPSIBLE, LOW TEMPERATURE |
| MIL P 28641 : 0 | PRIMER COATING, VINYL CHLORIDE ACETATE COPOLYMER, HIGH BUILD (FOR STEEL AND MASONRY) |
| MIL P 24441/29 : 0 | PAINT, EPOXY-POLYAMIDE, GREEN PRIMER, FORMULA 150, TYPE IV |
| O-C-650 Revision B:1975 | CORRECTION FLUID, WHITE OPAQUE; AND THINNER |
| MIL P 15183 : B NOTICE 1 | PAINT, EXTERIOR, ALKYD, GRAY, NO. 11 (FORMULA NO 109) (METRIC) |
| MIL-L-52043 Revision C:1972 | LACQUER, SEMI GLOSS, CELLULOSE NITRATE |
| MIL P 24441/36 : 1991 | PAINT, EPOXY-POLYAMIDE, NO.50 GRAY, FORMULA 157, TYPE IV |
| MIL-P-28582 Base Document:1972 | PRIMER COATING, EXTERIOR, LEAD PIGMENT-FREE, (UNDERCOAT FOR WOOD, READY-MIXED, WHITE AND TINTS) |
| MIL C 4556 : E | COATING KIT, EPOXY, FOR INTERIOR OF STEEL FUEL TANKS |
| MIL-DTL-64159 Revision B:2011 | CAMOUFLAGE COATING, WATER DISPERSIBLE ALIPHATIC POLYURETHANE, CHEMICAL AGENT RESISTANT |
| TT-P-1511 Revision B:1981 | PAINT, LATEX (GLOSS & SEMIGLOSS, TINTS & WHITE) (FOR INTERIOR USE) |
| MIL P 24441/21 : 0 | PAINT, EPOXY-POLYAMIDE, HAZE GRAY, FORMULA 151, TYPE III |
| MIL D 5551 : B | DOPE, CELLULOSE ACETATE BUTYRATE, PIGMENTED, GLOSS |
| AASHTO R 31 : 2009 : R2014 | PRACTICE FOR EVALUATION OF PROTECTIVE COATING SYSTEMS FOR STRUCTURAL STEEL |
| TT-E-529 Revision G:1988 | ENAMEL, ALKYD, SEMIGLOSS, LOW VOC CONTENT |
| MIL-DTL-11195 Revision H:2011 | Enamel, Lusterless, Fast Dry, VOC Compliant, (for use on Ammunition and Other Metals) |
| MIL-DTL-53039 Revision E:2013 | COATING, ALIPHATIC POLYURETHANE, SINGLE COMPONENT, CHEMICAL AGENT RESISTANT |
| TT-C-535 Revision B:1972 | COATING EPOXY, TWO COMPONENT, FOR INTERIOR USE ON METAL, WOOD, WALLBOARD, PAINTED SURFACES CONCRETE AND MASONRY |
| MIL P 24441/27 : 0 | PAINT EPOXY-POLYAMIDE, N0.50 GRAY, FORMULA 157, TYPE III |
| ASTM D 3288/D3288M : 2015 : REDLINE | Standard Test Methods for Magnet-Wire Enamels |
| MIL P 24441/31 : 1991 | PAINT, EPOXY-POLYAMIDE, WHITE, FORMULA 152, TYPE IV |
| TT-E-1593 Revision B:1974 | ENAMEL, SILICONE ALKYD COPOLYMER, GLOSS (FOR EXTERIOR AND INTERIOR USE) |
| MIL-P-24441-41 Base Document:1991 | PAINT, EPOXY-POLYAMIDE, BLACK NONABRASIVE NONSLIP, FORMULA 163, TYPE IV |
| ASTM D 5098 : 2016 : REDLINE | Standard Specification for Artists' Acrylic Dispersion Paints |
| ASTM D 5724 : 2016 : REDLINE | Standard Specification for Gouache Paints |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.