ASTM D 4761 : 2019
Current
The latest, up-to-date edition.
Standard Test Methods for Mechanical Properties of Lumber and Wood-Based Structural Materials
Hardcopy , PDF
English
01-04-2019
Important note : Users cannot be edited or removed once added to your Multi user PDF.These test methods cover the determination of the mechanical properties of stress-graded lumber and other wood-based structural materials.
| Committee |
D 07
|
| DocumentType |
Test Method
|
| Pages |
11
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1These test methods cover the determination of the mechanical properties of stress-graded lumber and other wood-based structural materials.
1.2These test methods appear in the following order:
| Section | |
| Bending edge-wise | 6 |
| Bending flat-wise: | |
| Center-point loading | 7 |
| Third-point loading | 8 |
| Axial strength in tension | 9 |
| Axial strength in compression | 10 |
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM D 7032 : 2017 | Standard Specification for Establishing Performance Ratings for Wood-Plastic Composite and Plastic Lumber Deck Boards, Stair Treads, Guards, and Handrails |
| ASTM D 7199 : 2007 : R2012 | Standard Practice for Establishing Characteristic Values for Reinforced Glued Laminated Timber (Glulam) Beams Using Mechanics-Based Models |
| ASTM D 6570 : 2018 : REV A | Standard Practice for Assigning Allowable Properties for Mechanically Graded Lumber |
| ASTM D 5456 : 2019 | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 7469 : 2016 | Standard Test Methods for End-Joints in Structural Wood Products |
| ASTM D 143 : 2014 | Standard Test Methods for Small Clear Specimens of Timber |
| ASTM D 7031 : 2011 : R2019 | Standard Guide for Evaluating Mechanical and Physical Properties of Wood-Plastic Composite Products |
| ASTM D 5055 : 2019 | Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists |
| ASTM D 3043 : 2017 | Standard Test Methods for Structural Panels in Flexure |
| ASTM D 5664 : 2017 | Standard Test Method for Evaluating the Effects of Fire-Retardant Treatments and Elevated Temperatures on Strength Properties of Fire-Retardant Treated Lumber |
| ASTM D 7381 : 2007 : R2013 | Standard Practice for Establishing Allowable Stresses for Round Timbers for Piles from Tests of Full-Size Material |
| ASTM D 1990 : 2016 | Standard Practice for Establishing Allowable Properties for Visually-Graded Dimension Lumber from In-Grade Tests of Full-Size Specimens |
| ASTM D 198 : 2015 | Standard Test Methods of Static Tests of Lumber in Structural Sizes |
| ASTM D 6874 : 2012 | Standard Test Methods for Nondestructive Evaluation of Wood-Based Flexural Members Using Transverse Vibration |
| ASTM D 7341 : 2014 | Standard Practice for Establishing Characteristic Values for Flexural Properties of Structural Glued Laminated Timber by Full-Scale Testing |
| ASTM D 5457 : 2019 : REV B | Standard Specification for Computing Reference Resistance of Wood-Based Materials and Structural Connections for Load and Resistance Factor Design |
| ASTM D 6815 : 2009 : R2015 | Standard Specification for Evaluation of Duration of Load and Creep Effects of Wood and Wood-Based Products |
| ASTM D 1990 : 2019 : REDLINE | Standard Practice for Establishing Allowable Properties for Visually-Graded Dimension Lumber from In-Grade Tests of Full-Size Specimens |
| ASTM D 1990 : 2019 | Standard Practice for Establishing Allowable Properties for Visually-Graded Dimension Lumber from In-Grade Tests of Full-Size Specimens |
| ASTM D 9 : 2020 | Standard Terminology Relating to Wood and Wood-Based Products |
| ASTM E 177 : 1990 : REV A : R1996 | Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods |
| ASTM D 4442 : 2007 | Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Base Materials |
| ASTM D 2915 : 2017 | Standard Practice for Sampling and Data-Analysis for Structural Wood and Wood-Based Products |
| ASTM D 7438 : 2020 | Standard Practice for Field Calibration and Application of Hand-Held Moisture Meters |
| ASTM D 4442 : 2015 | Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Based Materials |
| ASTM E 6 : 2002 | Standard Terminology Relating to Methods of Mechanical Testing |
| ASTM D 198 : 2021 | Standard Test Methods of Static Tests of Lumber in Structural Sizes |
| ASTM D 4442 : 2016 | Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Based Materials |
| ASTM D 7438 : 2013 | Standard Practice for Field Calibration and Application of Hand-Held Moisture Meters |
| ASTM D 2915 : 2003 | Standard Practice for Evaluating Allowable Properties for Grades of Structural Lumber |
| ASTM D 2915 : 2017 : R2022 | Standard Practice for Sampling and Data-Analysis for Structural Wood and Wood-Based Products |
| ASTM D 7438 : 2008 | Standard Practice for Field Calibration and Application of Hand-Held Moisture Meters |
| ASTM D 4442 : 2020 | Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Based Materials |
| ASTM E 6 : 2015 : EDT 3 | Standard Terminology Relating to Methods of Mechanical Testing |
| ASTM D 198 : 2021 : REV A | Standard Test Methods of Static Tests of Lumber in Structural Sizes |
| ASTM E 6 : 2023 : REV A | Standard Terminology Relating to Methods of Mechanical Testing |
| ASTM E 4 : 2021 | Standard Practices for Force Calibration and Verification of Testing Machines |
| ASTM D 198 : 2022 | Standard Test Methods of Static Tests of Lumber in Structural Sizes |
| ASTM E 6 : 2015 : EDT 4 : REDLINE | Standard Terminology Relating to Methods of Mechanical Testing |
| ASTM D 198 : 2022 : REV A | Standard Test Methods of Static Tests of Lumber in Structural Sizes |
| ASTM D 2915 : 2010 | Practice for Sampling and Data-Analysis for Structural Wood and Wood-Based Products |
| ASTM E 6 : 2015 : EDT 4 | Standard Terminology Relating to Methods of Mechanical Testing |
| ASTM E 6 : 2023 | Standard Terminology Relating to Methods of Mechanical Testing |
| ASTM D 2915 : 1998 : EDT 1 | Standard Practice for Evaluating Allowable Properties for Grades of Structural Lumber |
| ASTM D 2915 : 2002 | Standard Practice for Evaluating Allowable Properties for Grades of Structural Lumber |
| ASTM D 4442 : 1992 : R1997 : EDT 1 | Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Base Materials |
| ASTM D 4442 : 1984 | Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Base Materials |
| ASTM E 4 : 2024 | Standard Practices for Force Calibration and Verification of Testing Machines |
| ASTM D 4442 : 1992 : R2003 | Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Base Materials |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.