ASTM D 4844 : 2016 : REDLINE
Current
The latest, up-to-date edition.
Standard Guide for Air Monitoring at Waste Management Facilities for Worker Protection
English
01-02-2016
Important note : Users cannot be edited or removed once added to your Multi user PDF.CONTAINED IN VOL. 11.04, 2016 Gives a standardized approach for establishing and carrying out an air monitoring program to protect workers at waste management facilities.
| Committee |
D 22
|
| DocumentType |
Redline
|
| Pages |
11
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
1.1This guide is intended to provide a standardized approach for establishing and carrying out an air monitoring program to protect workers at waste management facilities. This guide may apply to routine operations at an active treatment, storage, or disposal site or the extraordinary conditions that can be encountered in opening and cleaning up a remedial action site.
1.2The user shall understand that it is impossible to predict all the issues that could arise at a waste management facility due to hazardous airborne emissions. Although air contaminant measurements obtained in accordance with this guide may indicate acceptable or tolerable levels of toxic agents are present, care and judgment must still be exercised before concluding that all atmospheric contaminants at the site are under control and that a reasonable safe work environment exists.
| BS ISO 16165:2013 | Ships and marine technology. Marine environment protection. Terminology relating to oil spill response |
| ASTM D 3413 : 1985 | Method of Test for Lead (Inorganic) in Workplace Atmospheres by Atomic Absorption Spectrometry (Withdrawn 1989) |
| ASTM E 1370 : 2014 : REDLINE | Standard Guide for Air Sampling Strategies for Worker and Workplace Protection |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| ASTM D 4687 : 2014 : REDLINE | Standard Guide for General Planning of Waste Sampling |
| ASTM D 3686 : 2013 : REDLINE | Standard Practice for Sampling Atmospheres to Collect Organic Compound Vapors (Activated Charcoal Tube Adsorption Method) |
| ASTM D 4532 : 2015 : REDLINE | Standard Test Method for Respirable Dust in Workplace Atmospheres Using Cyclone Samplers |
| ASTM D 6785 : 2013 | Standard Test Method for Determination of Lead in Workplace Air Using Flame or Graphite Furnace Atomic Absorption Spectrometry |
| ASTM D 2913 : 2014 : REDLINE | Standard Test Method for Mercaptan Content of the Atmosphere |
| ASTM D 3824 : 2012 : REDLINE | Standard Test Methods for Continuous Measurement of Oxides of Nitrogen in the Ambient or Workplace Atmosphere by the Chemiluminescent Method |
| ASTM D 6832 : 2013-10 | TEST METHOD FOR THE DETERMINATION OF HEXAVALENT CHROMIUM IN WORKPLACE AIR BY ION CHROMATOGRAPHY AND SPECTROPHOTOMETRIC MEASUREMENT USING 1,5-DIPHENYLCARBAZIDE |
| ASTM D 7036 : 2016 : REDLINE | Standard Practice for Competence of Air Emission Testing Bodies |
| ASTM D 4323 : 2015 : REDLINE | Standard Test Method for Hydrogen Sulfide in the Atmosphere by Rate of Change of Reflectance |
| ASTM D 7773 : 2012 | Standard Test Method for Determination of Volatile Inorganic Acids (HCl, HBr, and HNO<inf>3 </inf>) Using Filter Sampling and Suppressed Ion Chromatography |
| ASTM D 4185 : 2017 : REDLINE | Standard Test Method for Measurement of Metals in Workplace Atmospheres by Flame Atomic Absorption Spectrophotometry |
| ASTM D 1605 : 1960 : R1990 | Recommended Practices for Sampling Atmospheres for Analysis of Gases and Vapors (Withdrawn 1992) |
| CFR 29(PT1910.1000 TO END) : 0 | LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR |
| ASTM D 7035 : 2016 : REDLINE | Standard Test Method for Determination of Metals and Metalloids in Airborne Particulate Matter by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) |
| ASTM D 4599 : 2014 : REDLINE | Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Length-of-Stain Dosimeters |
| ASTM D 6562 : 2012 : REDLINE | Standard Test Method for Determination of Gaseous Hexamethylene Diisocyanate (HDI) in Air with 9-(N-methylaminomethyl) Anthracene Method (MAMA) in the Workplace |
| ASTM D 4240 : 1983 : R1989 : EDT 1 | Test Method for Airborne Asbestos Concentration in Workplace Atmosphere |
| ASTM D 3162 : 2012 : REDLINE | Standard Test Method for Carbon Monoxide in the Atmosphere (Continuous Measurement by Nondispersive Infrared Spectrometry) |
| ASTM D 5681 : 2017-09 | TERMINOLOGY FOR WASTE AND WASTE MANAGEMENT |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.