![header thumbnail](/images/publishers\astm_cover.gif)
ASTM D 4867/D4867M : 2009 : R2014
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
![header thumbnail](/images/publishers\astm_cover.gif)
Standard Test Method for Effect of Moisture on Asphalt Concrete Paving Mixtures
Hardcopy , PDF
21-11-2022
English
07-11-2014
CONTAINED IN VOL. 04.03, 2015 Defines procedures for preparing and testing asphalt concrete specimens for the purpose of measuring the effect of water on the tensile strength of the paving mixture.
Committee |
D 04
|
DevelopmentNote |
Supersedes ASTM D 4867 (04/04)
|
DocumentType |
Test Method
|
Pages |
5
|
ProductNote |
Reconfirmed 2014
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This test method covers procedures for preparing and testing asphalt concrete specimens for the purpose of measuring the effect of water on the tensile strength of the paving mixture. This test method is applicable to dense mixtures such as those appearing in the Table for Composition of Bituminous Paving Mixtures in Specification D3515. This test method can be used to evaluate the effect of moisture with or without antistripping additives including liquids and pulverulent solids such as hydrated lime or portland cement.
1.2The values stated in either SI units or inch-pound units in parentheses shall be regarded separately as standard. The values in each system may not be exact equivalents; therefore, each system must be used independently of the other, without combining values in any way.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
ASTM D 7870/D7870M : 2020 | Standard Practice for Moisture Conditioning Compacted Asphalt Mixture Specimens by Using Hydrostatic Pore Pressure |
ASTM D 5106 : 2022 | Standard Specification for Steel Slag Aggregates for Asphalt Paving Mixtures |
ASTM D 6931 : 2017 | Standard Test Method for Indirect Tensile (IDT) Strength of Asphalt Mixtures |
ASTM D 6155 : 2019 | Standard Specification for Nontraditional Coarse Aggregates for Asphalt Paving Mixtures |
ASTM D 6926 : 2016 : REDLINE | Standard Practice for Preparation of Asphalt Mixture Specimens Using Marshall Apparatus |
ASTM D 3515 : 2001 | Standard Specification for Hot-Mixed, Hot-Laid Bituminous Paving Mixtures (Withdrawn 2009) |
ASTM D 2726 : 2005 | Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures |
ASTM D 4013 : 1998 | Standard Practice for Preparation of Test Specimens of Bituminous Mixtures by Means of Gyratory Shear Compactor |
ASTM D 4013 : 2009 | Standard Practice for Preparation of Test Specimens of Bituminous Mixtures by Means of Gyratory Shear Compactor (Withdrawn 2013) |
ASTM D 3665 : 2002 | Standard Practice for Random Sampling of Construction Materials |
ASTM D 2726 : 2004 | Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures |
ASTM D 6926 : 2004 | Standard Practice for Preparation of Bituminous Specimens Using Marshall Apparatus |
ASTM D 2726 : 2010 | Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures |
ASTM D 3387 : 1983 : R1996 | Standard Test Method for Compaction and Shear Properties of Bituminous Mixtures by Means of the U.S. Corps of Engineers Gyratory Testing Machine (GTM) |
ASTM D 2041 : 2000 | Standard Test Method for Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures |
ASTM D 3203 : 1994 : R2000 | Standard Test Method for Percent Air Voids in Compacted Dense and Open Bituminous Paving Mixtures |
ASTM D 1074 : 2017 | Standard Test Method for Compressive Strength of Asphalt Mixtures |
ASTM D 3387 : 1983 : R2003 | Standard Test Method for Compaction and Shear Properties of Bituminous Mixtures by Means of the U.S. Corps of Engineers Gyratory Testing Machine (GTM) |
ASTM D 1561 : 1992 : R2005 : EDT 1 | Standard Practice for Preparation of Bituminous Mixture Test Specimens by Means of California Kneading Compactor |
ASTM D 1074 : 1996 | Standard Test Method for Compressive Strength of Bituminous Mixtures |
ASTM D 1074 : 2009 | Standard Test Method for Compressive Strength of Bituminous Mixtures |
ASTM D 3665 : 2012 : R2017 | Standard Practice for Random Sampling of Construction Materials |
ASTM D 3496 : 1999 : R2005 | Standard Practice for Preparation of Bituminous Mixture Specimens for Dynamic Modulus Testing (Withdrawn 2010) |
ASTM D 2041 : 2003 : REV A | Standard Test Method for Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures |
ASTM D 1074 : 2017 : REDLINE | Standard Test Method for Compressive Strength of Asphalt Mixtures |
ASTM D 3665 : 2007 | Standard Practice for Random Sampling of Construction Materials |
ASTM D 3387 : 2011 | Standard Test Method for Compaction and Shear Properties of Bituminous Mixtures by Means of the U.S. Corps of Engineers Gyratory Testing Machine (GTM) (Withdrawn 2020) |
ASTM D 3203 : 2022 | Standard Test Method for Percent Air Voids in Compacted Asphalt Mixtures |
ASTM D 2726 : 2000 | Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures |
ASTM D 3549 : 2003 | Standard Test Method for Thickness or Height of Compacted Bituminous Paving Mixture Specimens |
ASTM D 2041 : 2003 | Standard Test Method for Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures |
ASTM D 3665 : 2012 | Standard Practice for Random Sampling of Construction Materials |
ASTM D 4123 : 1982 : R1995 | Standard Test Method for Indirect Tension Test for Resilient Modulus of Bituminous Mixtures (Withdrawn 2003) |
ASTM D 6926 : 2020 | Standard Practice for Preparation of Asphalt Mixture Specimens Using Marshall Apparatus |
ASTM D 2726 : 2008 | Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures |
ASTM D 6926 : 2010 | Standard Practice for Preparation of Bituminous Specimens Using Marshall Apparatus |
ASTM D 3496 : 1999 | Standard Practice for Preparation of Bituminous Mixture Specimens for Dynamic Modulus Testing |
ASTM D 3203 : 2005 | Standard Test Method for Percent Air Voids in Compacted Dense and Open Bituminous Paving Mixtures |
ASTM D 3549 : 1993 : REV A : R2000 | Standard Test Method for Thickness or Height of Compacted Bituminous Paving Mixture Specimens |
ASTM D 2726 : 2009 | Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures |
ASTM D 1561 : 1992 : R2000 | Standard Practice for Preparation of Bituminous Mixture Test Specimens by Means of California Kneading Compactor |
ASTM D 2726 : 2005 : REV A | Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures |
ASTM D 1074 : 2002 | Standard Test Method for Compressive Strength of Bituminous Mixtures |
ASTM D 6926 : 2016 | Standard Practice for Preparation of Asphalt Mixture Specimens Using Marshall Apparatus |
ASTM D 3665 : 2007 : EDT 1 | Standard Practice for Random Sampling of Construction Materials |
ASTM D 3665 : 2006 | Standard Practice for Random Sampling of Construction Materials |
ASTM D 3387 : 2011 : REDLINE | Standard Test Method for Compaction and Shear Properties of Bituminous Mixtures by Means of the U.S. Corps of Engineers Gyratory Testing Machine (GTM) |
ASTM D 1561 : 1992 : R2005 | Standard Practice for Preparation of Bituminous Mixture Test Specimens by Means of California Kneading Compactor |
ASTM D 3665 : 1999 | Standard Practice for Random Sampling of Construction Materials |
ASTM D 2726 : 2011 | Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures |
ASTM D 3515 : 1996 | Standard Specification for Hot-Mixed, Hot-Laid Bituminous Paving Mixtures |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.