![header thumbnail](/images/publishers\astm_cover.gif)
ASTM D 5168 : 2012 : R2017
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
![header thumbnail](/images/publishers\astm_cover.gif)
Standard Practice for Fabrication and Closure of Triple-Wall Corrugated Fiberboard Containers
Hardcopy , PDF
17-06-2022
English
21-06-2017
CONTAINED IN VOL. 15.09, 2017 Describes the fabrication and closure of new triple-wall corrugated fiberboard containers.
Committee |
D 10
|
DocumentType |
Standard Practice
|
Pages |
7
|
ProductNote |
Reconfirmed 2017
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This practice covers the fabrication and closure of new triple-wall corrugated fiberboard containers.
1.2This practice indicates the factors and components that must be controlled in the manufacture of triple-wall fiberboard containers.
1.3The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM B 900 : 2016 | Standard Practice for Packaging of Copper and Copper Alloy Mill Products for U.S. Government Agencies |
ASTM D 4727/D4727M : 2022 | Standard Specification for Corrugated and Solid Fiberboard Sheet Stock (Container Grade) and Cut Shapes |
ASTM D 3951 : 2018 | Standard Practice for Commercial Packaging |
ASTM D 5639/D5639M : 2020 | Standard Practice for Selection of Corrugated Fiberboard Materials and Box Construction Based on Performance Requirements |
ASTM F 2511 : 2005 : R2022 | Standard Specification for Rollers, Bearing, Needle, Ferrous, Solid |
ASTM B 660 : 2021 | Standard Practices for Packaging/Packing of Aluminum and Magnesium Products |
ASTM F 1142 : 2019 | Standard Specification for Manhole Cover Assembly, Bolted, Semi-Flush, Oiltight and Watertight |
ASTM B 660 : 2015 | Standard Practices for Packaging/Packing of Aluminum and Magnesium Products |
ASTM D 5639/D5639M : 2011 : R2015 | Standard Practice for Selection of Corrugated Fiberboard Materials and Box Construction Based on Performance Requirements |
ASTM D 4727/D4727M : 2017 | Standard Specification for Corrugated and Solid Fiberboard Sheet Stock (Container Grade) and Cut Shapes |
ASTM F 2511 : 2005 : R2013 | Standard Specification for Rollers, Bearing, Needle, Ferrous, Solid |
ASTM D 3953 : 2006 | Standard Specification for Strapping, Flat Steel and Seal |
ASTM D 3950 : 2010 : REV B | Standard Specification for Strapping, Nonmetallic (and Joining Methods) |
ASTM D 3951 : 2010 | Standard Practice for Commercial Packaging |
TAPPI T 811 : 2011 | EDGEWISE COMPRESSIVE STRENGTH OF CORRUGATED FIBERBOARD (SHORT COLUMN TEST) |
ASTM D 3950 : 2017 : REDLINE | Standard Specification for Strapping, Nonmetallic (and Joining Methods) |
ASTM D 5330/D5330M : 1993 : EDT 1 | Standard Specification for Pressure-Sensitive Tape for Packaging, Filament- Reinforced |
TAPPI T 810 : 2011 | BURSTING STRENGTH OF CORRUGATED BOARD |
ASTM D 3953 : 2007 | Standard Specification for Strapping, Flat Steel and Seals |
ASTM D 3950 : 2001 | Standard Specification for Strapping, Nonmetallic (and Joining Methods) |
ASTM D 3953 : 2015 : REDLINE | Standard Specification for Strapping, Flat Steel and Seals |
TAPPI T 411 : 2010 | THICKNESS (CALIPER) OF PAPER, PAPERBOARD, AND COMBINED BOARD |
ASTM D 3950 : 2010 : REV A | Standard Specification for Strapping, Nonmetallic (and Joining Methods) |
ASTM D 3951 : 1998 | Standard Practice for Commercial Packaging |
ASTM D 3953 : 1991 | Standard Specification for Strapping, Flat Steel and Seals |
ASTM D 3950 : 2016 | Standard Specification for Strapping, Nonmetallic (and Joining Methods) |
ASTM D 3950 : 2007 | Standard Specification for Strapping, Nonmetallic (and Joining Methods) |
ASTM D 4675 : 2009 | Standard Guide for Selection and Use of Flat Strapping Materials |
ASTM D 3953 : 2012 | Standard Specification for Strapping, Flat Steel and Seals |
ASTM D 3953 : 2015 | Standard Specification for Strapping, Flat Steel and Seals |
ASTM D 4675 : 2006 | Standard Guide for Selection and Use of Flat Strapping Materials |
ASTM D 3950 : 2004 | Standard Specification for Strapping, Nonmetallic (and Joining Methods) |
ASTM D 3950 : 2009 | Standard Specification for Strapping, Nonmetallic (and Joining Methods) |
ASTM D 3950 : 2005 | Standard Specification for Strapping, Nonmetallic (and Joining Methods) |
ASTM D 996 : 2016 : REDLINE | Standard Terminology of Packaging and Distribution Environments |
ASTM D 3953 : 2005 | Standard Specification for Strapping, Flat Steel and Seals |
ASTM D 3951 : 2015 | Standard Practice for Commercial Packaging |
ASTM D 3951 : 2018 | Standard Practice for Commercial Packaging |
IEEE/ASTM SI_10-2010 | American National Standard for Metric Practice |
ASTM D 3950 : 2009 : REV A | Standard Specification for Strapping, Nonmetallic (and Joining Methods) |
ASTM D 3950 : 2011 | Standard Specification for Strapping, Nonmetallic (and Joining Methods) |
ASTM D 4675 : 2003 | Standard Guide for Selection and Use of Flat Strapping Materials |
ASTM D 3953 : 2007 : REV A | Standard Specification for Strapping, Flat Steel and Seals |
ASTM D 4727/D4727M : 2017 : REDLINE | Standard Specification for Corrugated and Solid Fiberboard Sheet Stock (Container Grade) and Cut Shapes |
ASTM D 3950 : 2006 | Standard Specification for Strapping, Nonmetallic (and Joining Methods) |
ASTM D 4675 : 2000 | Standard Guide for Selection and Use of Flat Strapping Materials |
ASTM D 3950 : 2017 | Standard Specification for Strapping, Nonmetallic (and Joining Methods) |
ASTM D 4675 : 2006 : EDT 1 | Standard Guide for Selection and Use of Flat Strapping Materials |
TAPPI T 803 : 2010 | PUNCTURE TEST OF CONTAINER BOARD |
ASTM D 4675 : 2006 : EDT 2 | Standard Guide for Selection and Use of Flat Strapping Materials |
ASTM D 4675 : 2009 : EDT 1 | Standard Guide for Selection and Use of Flat Strapping Materials |
ASTM D 3950 : 2012 : REV A | Standard Specification for Strapping, Nonmetallic (and Joining Methods) |
ASTM D 4675 : 2014 | Standard Guide for Selection and Use of Flat Strapping Materials |
ASTM D 3950 : 2010 | Standard Specification for Strapping, Nonmetallic (and Joining Methods) |
ASTM D 3953 : 2002 | Standard Specification for Strapping, Flat Steel and Seals |
ASTM D 3950 : 2000 | Standard Specification for Strapping, Nonmetallic (and Joining Methods) |
ASTM D 996 : 2010 | Standard Terminology of Packaging and Distribution Environments |
ASTM D 3953 : 2013 | Standard Specification for Strapping, Flat Steel and Seals |
TAPPI T 812 : 2013 | PLY SEPARATION OF SOLID AND CORRUGATED FIBERBOARD (WET) |
ASTM D 4727/D4727M : 2022 | Standard Specification for Corrugated and Solid Fiberboard Sheet Stock (Container Grade) and Cut Shapes |
ASTM D 3953 : 1997 | Standard Specification for Strapping, Flat Steel and Seals |
CFR 49(PTS100-185) : 0 | TRANSPORTATION |
ASTM D 4675 : 2014 : REV A | Standard Guide for Selection and Use of Flat Strapping Materials<sup>1</sup> |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.