• Shopping Cart
    There are no items in your cart

ASTM D 5295/D5295M : 2018

Current

Current

The latest, up-to-date edition.

Standard Guide for Preparation of Concrete Surfaces for Adhered (Bonded) Membrane Waterproofing Systems

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-03-2018

€56.53
Excluding VAT

Committee
D 08
DocumentType
Guide
Pages
6
PublisherName
American Society for Testing and Materials
Status
Current
Supersedes

1.1This guide provides recommendations for the preparation of concrete surfaces prior to the application of adhered (bonded) waterproofing.

1.2This guide is directed primarily toward installations of new concrete, but is also applicable for existing concrete installations. (See also ACI 116 and ACI 546.)

1.3This guide does not apply to loose laid systems, bentonite systems, lead, or the like.

1.4This guide does not apply to applications involving insulating concrete.

1.5This guide does not apply to applications involving lightweight structural concrete.

Note 1:Once installed, it is difficult to visually identify the difference between normal weight and lightweight concrete. It is recommended that a review of contract documents, concrete batch or delivery tickets or similar effort be performed to identify the concrete type.

1.6The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

1.7This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.8This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

ASTM D 6769/D6769M : 2002 : R2010 : EDT 1 Standard Guide for Application of Fully Adhered, Cold-Applied, Prefabricated Reinforced Modified Bituminous Membrane Waterproofing Systems

ASTM D 1079 : 2018 : EDT 1 Standard Terminology Relating to Roofing and Waterproofing
ASTM D 1079 : 2008 : REV A Standard Terminology Relating to Roofing and Waterproofing
ASTM D 1079 : 2016 Standard Terminology Relating to Roofing and Waterproofing
ASTM D 1079 : 2006 Terminology Relating to Roofing and Waterproofing
ASTM F 2659 : 2010 : R2015 Standard Guide for Preliminary Evaluation of Comparative Moisture Condition of Concrete, Gypsum Cement and Other Floor Slabs and Screeds Using a Non-Destructive Electronic Moisture Meter
ASTM D 1079 : 2020 Standard Terminology Relating to Roofing and Waterproofing
ASTM D 4262 : 2005 : R2018 Standard Test Method for pH of Chemically Cleaned or Etched Concrete Surfaces
ASTM D 4262 : 1983 : R1999 Standard Test Method for pH of Chemically Cleaned or Etched Concrete Surfaces
ASTM F 2659 : 2022 Standard Guide for Preliminary Evaluation of Comparative Moisture Condition of Concrete, Gypsum Cement and Other Floor Slabs and Screeds Using a Non-Destructive Electronic Moisture Meter
ASTM D 1079 : 2013 Standard Terminology Relating to Roofing and Waterproofing
ASTM D 1079 : 2007 : REV A Terminology Relating to Roofing and Waterproofing
ASTM D 1079 : 2010 Standard Terminology Relating to Roofing and Waterproofing
ASTM D 4258 : 2005 : R2017 Standard Practice for Surface Cleaning Concrete for Coating
ASTM D 1079 : 2018 Standard Terminology Relating to Roofing and Waterproofing
ASTM D 1079 : 2005 : REV A Terminology Relating to Roofing and Waterproofing
ASTM D 4263 : 2024 Standard Practice for Indicating Moisture in Concrete by the Plastic Sheet Method
ASTM D 4258 : 2023 Standard Practice for Surface Cleaning Concrete for Coating
ASTM D 1079 : 2002 Standard Terminology Relating to Roofing, Waterproofing, and Bituminous Materials
ASTM D 4263 : 1983 : R2005 Standard Test Method for Indicating Moisture in Concrete by the Plastic Sheet Method
ASTM D 4262 : 2005 Standard Test Method for pH of Chemically Cleaned or Etched Concrete Surfaces
ASTM D 4263 : 1983 : R1999 Standard Test Method for Indicating Moisture in Concrete by the Plastic Sheet Method
ASTM D 4262 : 2005 : R2012 Standard Test Method for pH of Chemically Cleaned or Etched Concrete Surfaces
ASTM D 1079 : 2001 Standard Terminology Relating to Roofing, Waterproofing, and Bituminous Materials
ASTM D 4258 : 2005 : R2012 Standard Practice for Surface Cleaning Concrete for Coating
ASTM D 4262 : 2005 : R2024 Standard Test Method for pH of Chemically Cleaned or Etched Concrete Surfaces
ASTM D 1079 : 2024 Standard Terminology Relating to Roofing and Waterproofing
ASTM F 2659 : 2023 Standard Guide for Preliminary Evaluation of Comparative Moisture Condition of Concrete, Gypsum Cement and Other Floor Slabs and Screeds Using a Non-Destructive Electronic Moisture Meter
ASTM D 4258 : 1983 : R1999 Standard Practice for Surface Cleaning Concrete for Coating
ASTM D 1079 : 2000 : REV A Standard Terminology Relating to Roofing, Waterproofing, and Bituminous Materials
ASTM D 4263 : 1983 : R2012 Standard Test Method for Indicating Moisture in Concrete by the Plastic Sheet Method
ASTM F 2659 : 2010 Standard Guide for Preliminary Evaluation of Comparative Moisture Condition of Concrete, Gypsum Cement and Other Floor Slabs and Screeds Using a Non-Destructive Electronic Moisture Meter
ASTM D 4258 : 2005 Standard Practice for Surface Cleaning Concrete for Coating
ASTM D 1079 : 2013 : EDT 1 Standard Terminology Relating to Roofing and Waterproofing
ASTM D 1079 : 2009 Standard Terminology Relating to Roofing and Waterproofing
ASTM D 4263 : 1983 : R2018 Standard Test Method for Indicating Moisture in Concrete by the Plastic Sheet Method

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.