ASTM D 5505 : 2014
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practice for Classifying Emulsified Recycling Agents
Hardcopy , PDF
10-11-2020
English
16-07-2014
Committee |
D 04
|
DocumentType |
Standard Practice
|
Pages |
2
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This practice identifies emulsified petroleum products that may be used as recycling agents in recycled mixes. These materials are classified by viscosity or by low temperature penetration after aging.
1.2This practice addresses emulsified materials designed specifically for use in recycling. The use of emulsified materials for recycling shall not be limited to this practice. For instance, the emulsified asphalts specified in Specifications D977 and D2397 may be used.
1.3The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to consult and establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
ASTM D 6997 : 2004 | Standard Test Method for Distillation of Emulsified Asphalt |
ASTM D 2042 : 2001 | Standard Test Method for Solubility of Asphalt Materials in Trichloroethylene |
ASTM D 2872 : 2019 | Standard Test Method for Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test) |
ASTM D 7402 : 2009 | Standard Practice for Identifying Cationic Emulsified Asphalts |
ASTM D 6933 : 2004 | Standard Test Method for Oversized Particles in Emulsified Asphalts (Sieve Test) |
ASTM D 7496 : 2018 | Standard Test Method for Viscosity of Emulsified Asphalt by Saybolt Furol Viscometer |
ASTM D 7496 : 2009 | Standard Test Method for Viscosity of Emulsified Asphalt by Saybolt Furol Viscometer |
ASTM D 7553 : 2015 | Standard Test Method for Solubility of Asphalt Materials in N-Propyl Bromide |
ASTM D 2042 : 1997 | Standard Test Method for Solubility of Asphalt Materials in Trichloroethylene |
ASTM D 2170 : 2001 : REV A : R2006 | Standard Test Method for Kinematic Viscosity of Asphalts (Bitumens) |
ASTM D 2170 : 1995 | Standard Test Method for Kinematic Viscosity of Asphalts (Bitumens) |
ASTM D 6937 : 2004 | Standard Test Method for Determining Density of Emulsified Asphalt |
ASTM D 6933 : 2013 | Standard Test Method for Oversized Particles in Emulsified Asphalts (Sieve Test) |
ASTM D 4124 : 1997 | Standard Test Methods for Separation of Asphalt into Four Fractions |
ASTM D 1754 : 1997 | Standard Test Method for Effect of Heat and Air on Asphaltic Materials (Thin-Film Oven Test) |
ASTM D 6937 : 2008 | Standard Test Method for Determining Density of Emulsified Asphalt |
ASTM D 2042 : 2009 | Standard Test Method for Solubility of Asphalt Materials in Trichloroethylene |
ASTM D 2170 : 2007 | Standard Test Method for Kinematic Viscosity of Asphalts (Bitumens) |
ASTM D 2872 : 2012 : EDT 1 | Standard Test Method for Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test) |
ASTM D 2042 : 2015 | Standard Test Method for Solubility of Asphalt Materials in Trichloroethylene |
ASTM D 6930 : 2004 | Standard Test Method for Settlement and Storage Stability of Emulsified Asphalts |
ASTM D 2397 : 2012 | Standard Specification for Cationic Emulsified Asphalt |
ASTM D 2170 : 2001 : REV A | Standard Test Method for Kinematic Viscosity of Asphalts (Bitumens) |
ASTM D 7553 : 2009 | Standard Test Method for Solubility of Asphalt Materials in N-Propyl Bromide |
ASTM D 7402 : 2009 : R2017 | Standard Practice for Identifying Cationic Emulsified Asphalts |
ASTM D 7496 : 2011 | Standard Test Method for Viscosity of Emulsified Asphalt by Saybolt Furol Viscometer |
ASTM D 6930 : 2010 | Standard Test Method for Settlement and Storage Stability of Emulsified Asphalts |
ASTM D 7553 : 2010 | Standard Test Method for Solubility of Asphalt Materials in N-Propyl Bromide |
ASTM D 2872 : 2012 | Standard Test Method for Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test) |
ASTM D 2397 : 2002 | Standard Specification for Cationic Emulsified Asphalt |
ASTM D 6997 : 2012 | Standard Test Method for Distillation of Emulsified Asphalt |
ASTM D 6933 : 2008 | Standard Test Method for Oversized Particles in Emulsified Asphalts (Sieve Test) |
ASTM D 4124 : 2009 : R2018 | Standard Test Method for Separation of Asphalt into Four Fractions |
ASTM D 7496 : 2017 | Standard Test Method for Viscosity of Emulsified Asphalt by Saybolt Furol Viscometer |
ASTM D 2872 : 1997 | Standard Test Method for Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test) |
ASTM D 2872 : 2004 | Standard Test Method for Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test) |
ASTM D 4124 : 2009 | Standard Test Method for Separation of Asphalt into Four Fractions |
ASTM D 2397 : 2005 | Standard Specification for Cationic Emulsified Asphalt |
ASTM D 6933 : 2018 | Standard Test Method for Oversized Particles in Emulsified Asphalts (Sieve Test) |
ASTM D 4124 : 2001 | Standard Test Methods for Separation of Asphalt into Four Fractions |
ASTM D 6937 : 2016 | Standard Test Method for Determining Density of Emulsified Asphalt |
ASTM D 2397 : 1998 | Standard Specification for Cationic Emulsified Asphalt |
ASTM D 6930 : 2019 | Standard Test Method for Settlement and Storage Stability of Emulsified Asphalts |
ASTM D 2170 : 2001 | Standard Test Method for Kinematic Viscosity of Asphalts (Bitumens) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.