![header thumbnail](/images/publishers\astm_cover.gif)
ASTM D 5516 : 2018
Current
The latest, up-to-date edition.
![header thumbnail](/images/publishers\astm_cover.gif)
Standard Test Method for Evaluating the Flexural Properties of Fire-Retardant Treated Softwood Plywood Exposed to Elevated Temperatures
Hardcopy , PDF
English
01-06-2018
1.1This test method is designed to determine the effect of exposure to high temperatures and humidities on the flexure properties of fire-retardant treated softwood plywood.
Committee |
D 07
|
DocumentType |
Test Method
|
Pages |
7
|
ProductNote |
THIS STANDARD ALSO REFERS TO ASTM E 176, AWPAC-27
|
PublisherName |
American Society for Testing and Materials
|
Status |
Current
|
Supersedes |
1.1This test method is designed to determine the effect of exposure to high temperatures and humidities on the flexure properties of fire-retardant treated softwood plywood. In this test method, plywood is exposed to a temperature of 77°C (170°F).
1.2The purpose of the test method is to compare the flexural properties of fire-retardant treated plywood relative to untreated plywood. The results of tests conducted in accordance with this test method provide a reference point for estimating strength temperature relationships. This test method is intended to provide an accelerated test at elevated temperatures and controlled humidities of plywood sheathing treated with the same chemical formulation(s) and processing conditions as plywood used commercially.
1.3The values stated in SI units are to be regarded as standard. The values given in parentheses are mathematical conversions to inch-pound units that are provided for information only and are not considered standard.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM D 5664 : 2017 | Standard Test Method for Evaluating the Effects of Fire-Retardant Treatments and Elevated Temperatures on Strength Properties of Fire-Retardant Treated Lumber |
ASTM D 7857 : 2016 | Standard Test Method for Evaluating the Flexural Properties and Internal Bond Strength of Fire-Retarded Mat-Formed Wood Structural Composite Panels Exposed to Elevated Temperatures |
ASTM D 6305 : 2008 : R2015 : EDT 1 | Standard Practice for Calculating Bending Strength Design Adjustment Factors for Fire-Retardant-Treated Plywood Roof Sheathing |
NFPA 703:2024 | Standard for Fire-Retardant-Treated Wood and Fire-Retardant Coatings for Building Materials |
ASTM D 1165 : 1980 : R1994 : EDT 1 | Standard Nonmenclature of Domestic Hardwoods and Softwoods (Withdrawn 2002) |
ASTM D 1165 : 2007 | Standard Nomenclature of Commercial Hardwoods and Softwoods |
ASTM D 9 : 2020 | Standard Terminology Relating to Wood and Wood-Based Products |
ASTM D 6305 : 2008 | Standard Practice for Calculating Bending Strength Design Adjustment Factors for Fire-Retardant-Treated Plywood Roof Sheathing |
ASTM E 84 : 2023 : REV D | Standard Test Method for Surface Burning Characteristics of Building Materials |
ASTM D 4933 : 2016 | Standard Guide for Moisture Conditioning of Wood and Wood-Based Materials |
ASTM D 4933 : 1999 : R2010 | Standard Guide for Moisture Conditioning of Wood and Wood-Base Materials |
ASTM E 84 : 2023 : REV C | Standard Test Method for Surface Burning Characteristics of Building Materials |
ASTM E 2768 : 2011 : R2018 | Standard Test Method for Extended Duration Surface Burning Characteristics of Building Materials (30 min Tunnel Test) |
ASTM D 2915 : 2017 | Standard Practice for Sampling and Data-Analysis for Structural Wood and Wood-Based Products |
ASTM D 6305 : 2008 : R2015 : EDT 1 | Standard Practice for Calculating Bending Strength Design Adjustment Factors for Fire-Retardant-Treated Plywood Roof Sheathing |
ASTM D 6305 : 1998 : EDT 1 | Standard Practice for Calculating Bending Strength Design Adjustment Factors for Fire-Retardant-Treated Plywood Roof Sheathing |
ASTM E 176 : 2021 : REV A : EDT 1 | Standard Terminology of Fire Standards |
ASTM E 84 : 2023 | Standard Test Method for Surface Burning Characteristics of Building Materials |
ASTM E 176 : 2018 : REV A : EDT 1 | Standard Terminology of Fire Standards |
ASTM D 4933 : 1999 | Standard Guide for Moisture Conditioning of Wood and Wood-Base Materials |
ASTM E 84 : 2021 | Standard Test Method for Surface Burning Characteristics of Building Materials |
ASTM D 4933 : 1999 : R2004 | Standard Guide for Moisture Conditioning of Wood and Wood-Base Materials |
ASTM E 176 : 2024 | Standard Terminology of Fire Standards |
ASTM E 84 : 2022 | Standard Test Method for Surface Burning Characteristics of Building Materials |
ASTM D 3043 : 2017 | Standard Test Methods for Structural Panels in Flexure |
ASTM D 3043 : 2000 | Standard Test Methods for Testing Structural Panels in Flexure |
ASTM D 1165 : 2018 | Standard Nomenclature of Commercial Hardwoods and Softwoods |
ASTM D 6305 : 2002 : EDT 1 | Standard Practice for Calculating Bending Strength Design Adjustment Factors for Fire-Retardant-Treated Plywood Roof Sheathing |
ASTM D 3043 : 2000 : EDT 1 | Standard Test Methods for Testing Structural Panels in Flexure |
ASTM D 6305 : 2021 | Standard Practice for Calculating Bending Strength Design Adjustment Factors for Fire-Retardant-Treated Plywood Roof Sheathing |
ASTM D 1165 : 2023 | Standard Nomenclature of Commercial Hardwoods and Softwoods |
ASTM E 84 : 2020 | Standard Test Method for Surface Burning Characteristics of Building Materials |
ASTM E 84 : 2021 : REV A | Standard Test Method for Surface Burning Characteristics of Building Materials |
ASTM E 176 : 2021 | Standard Terminology of Fire Standards |
ASTM D 2915 : 2003 | Standard Practice for Evaluating Allowable Properties for Grades of Structural Lumber |
ASTM D 4933 : 2016 : R2021 | Standard Guide for Moisture Conditioning of Wood and Wood-Based Materials |
ASTM D 2915 : 2017 : R2022 | Standard Practice for Sampling and Data-Analysis for Structural Wood and Wood-Based Products |
ASTM E 176 : 2018 : REV A : EDT 2 | Standard Terminology of Fire Standards |
ASTM E 84 : 2023 : REV B | Standard Test Method for Surface Burning Characteristics of Building Materials |
ASTM D 6305 : 2002 | Standard Practice for Calculating Bending Strength Design Adjustment Factors for Fire-Retardant-Treated Plywood Roof Sheathing |
ASTM D 1165 : 2003 | Standard Nonmenclature of Domestic Hardwoods and Softwoods |
ASTM D 3043 : 1987 : R1993 : EDT 1 | Standard Methods of Testing Structural Panels in Flexure |
ASTM D 1165 : 2013 | Standard Nomenclature of Commercial Hardwoods and Softwoods |
ASTM E 2768 : 2011 | Standard Test Method for Extended Duration Surface Burning Characteristics of Building Materials (30 min Tunnel Test) |
ASTM E 84 : 2023 : REV A | Standard Test Method for Surface Burning Characteristics of Building Materials |
ASTM D 2915 : 2010 | Practice for Sampling and Data-Analysis for Structural Wood and Wood-Based Products |
ASTM D 2915 : 1998 : EDT 1 | Standard Practice for Evaluating Allowable Properties for Grades of Structural Lumber |
ASTM E 176 : 2021 : REV A | Standard Terminology of Fire Standards |
ASTM D 2915 : 2002 | Standard Practice for Evaluating Allowable Properties for Grades of Structural Lumber |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.