ASTM D 5681 : 2017
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Terminology for Waste and Waste Management
Hardcopy , PDF
28-11-2018
English
01-09-2017
Important note : Users cannot be edited or removed once added to your Multi user PDF.This terminology contains standard definitions of terms used in the general area of waste and waste management.
| Committee |
D 34
|
| DocumentType |
Reference Material
|
| Pages |
20
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This terminology contains standard definitions of terms used in the general area of waste and waste management. It is intended to promote understanding by providing precise technical definitions of terms used in the standards developed by Committee D34 and its subcommittees.
1.2Terms used only within an individual standard, and having a meaning unique to that standard, may be defined or explained in the terminology section of that individual standard.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM D 7858 : 2013 : R2018 | Standard Test Method for Determination of Bisphenol A in Soil, Sludge, and Biosolids by Pressurized Fluid Extraction and Analyzed by Liquid Chromatography/Tandem Mass Spectrometry |
| ASTM D 5283 : 2018 | Standard Practice for Generation of Environmental Data Related to Waste Management Activities: Quality Assurance and Quality Control Planning and Implementation |
| ASTM D 6323 : 2019 | Standard Guide for Laboratory Subsampling of Media Related to Waste Management Activities |
| ASTM D 8018 : 2015 | Standard Test Method for Determination of (Tri-n-butyl)-n-tetradecylphosphonium chloride (TTPC) in Soil by Multiple Reaction Monitoring Liquid Chromatography/Mass Spectrometry (LC/MS/MS) |
| ASTM E 775 : 2015 | Standard Test Methods for Total Sulfur in the Analysis Sample of Refuse-Derived Fuel |
| ASTM D 6661 : 2017 | Standard Practice for Field Collection of Organic Compounds from Surfaces Using Wipe Sampling |
| ASTM D 4981 : 2019 | Standard Practice for Screening of Oxidizers in Waste |
| ASTM D 6538 : 2012 | Standard Guide for Sampling Wastewater With Automatic Samplers |
| ASTM E 790 : 2015 | Standard Test Method for Residual Moisture in Refuse-Derived Fuel Analysis Samples |
| ASTM D 6956 : 2017 | Standard Guide for Demonstrating and Assessing Whether a Chemical Analytical Measurement System Provides Analytical Results Consistent with Their Intended Use |
| ASTM D 5831 : 2017 | Standard Practice for Screening Fuels in Soils |
| ASTM D 8155 : 2017 | Standard Practice for Shake Extraction of Solid Mining and Metallurgical Processing Waste with Water |
| ASTM D 7203 : 2011 : R2017 | Standard Practice for Screening Trichloroethylene (TCE)-Contaminated Media Using a Heated Diode Sensor (Withdrawn 2022) |
| ASTM D 7353 : 2007 : R2013 | Standard Practice for Sampling of Liquids in Waste Management Activities Using a Peristaltic Pump |
| ASTM D 4979 : 2019 | Standard Practice for Physical Description Screening Analysis in Waste |
| ASTM D 5058 : 2012 | Standard Practices for Compatibility of Screening Analysis of Waste |
| ASTM E 953/E953M : 2016 | Standard Practice for Fusibility of Refuse-Derived Fuel (RDF) Ash |
| ASTM D 3987 : 2012 | Standard Practice for Shake Extraction of Solid Waste with Water |
| ASTM D 6907 : 2005 : R2016 | Standard Practice for Sampling Soils and Contaminated Media with Hand-Operated Bucket Augers |
| ASTM D 5759 : 2012 | Standard Guide for Characterization of Coal Fly Ash and Clean Coal Combustion Fly Ash for Potential Uses |
| ASTM D 6270 : 2017 | Standard Practice for Use of Scrap Tires in Civil Engineering Applications |
| ASTM D 4646 : 2016 | Standard Test Method for 24-h Batch-Type Measurement of Contaminant Sorption by Soils and Sediments |
| ASTM E 1266 : 2012 | Standard Practice for Processing Mixtures of Lime, Fly Ash, and Heavy Metal Wastes in Structural Fills and Other Construction Applications |
| ASTM D 6346 : 2017 | Standard Guide for Accepting, Segregating, and Packaging Materials Collected Through Household Hazardous Waste Programs |
| ASTM E 791 : 2008 : R2016 | Standard Test Method for Calculating Refuse-Derived Fuel Analysis Data from As-Determined to Different Bases |
| ASTM D 5792 : 2010 : R2015 | Standard Practice for Generation of Environmental Data Related to Waste Management Activities: Development of Data Quality Objectives |
| ASTM D 6759 : 2016 | Standard Practice for Sampling Liquids Using Grab and Discrete Depth Samplers |
| ASTM E 1109 : 2019 | Standard Test Method for Determining the Bulk Density of Solid Waste Fractions |
| ASTM D 7204 : 2015 | Standard Practice for Sampling Waste Streams on Conveyors |
| ASTM D 4547 : 2015 | Standard Guide for Sampling Waste and Soils for Volatile Organic Compounds |
| ASTM D 8187 : 2018 | Standard Guide for Interpretation of Standard Humidity Cell Test Results |
| ASTM D 6699 : 2016 | Standard Practice for Sampling Liquids Using Bailers |
| ASTM E 778 : 2015 | Standard Test Methods for Nitrogen in Refuse-Derived Fuel Analysis Samples |
| ASTM D 6009 : 2012 | Standard Guide for Sampling Waste Piles |
| ASTM D 4844 : 2016 | Standard Guide for Air Monitoring at Waste Management Facilities for Worker Protection |
| ASTM D 8064 : 2016 | Standard Test Method for Elemental Analysis of Soil and Solid Waste by Monochromatic Energy Dispersive X-ray Fluorescence Spectrometry Using Multiple Monochromatic Excitation Beams (Withdrawn 2024) |
| ASTM D 5057 : 2017 | Standard Test Method for Screening Apparent Specific Gravity and Bulk Density of Waste |
| ASTM D 5658 : 2013 | Standard Practice for Sampling Unconsolidated Waste From Trucks |
| ASTM E 829 : 2016 | Standard Practice for Preparing Refuse-Derived Fuel (RDF) Laboratory Samples for Analysis |
| ASTM D 5198 : 2017 | Standard Practice for Nitric Acid Digestion of Solid Waste |
| ASTM E 777 : 2017 : REV A | Standard Test Method for Carbon and Hydrogen in the Analysis Sample of Refuse-Derived Fuel |
| ASTM D 7831 : 2013 | Standard Practice for Sampling of Tanks by Field Personnel |
| ASTM D 5232 : 2013 | Standard Test Method for Determining the Stability and Miscibility of a Solid, Semi-Solid, or Liquid Waste Material |
| ASTM D 6700 : 2019 | Standard Guide for Use of Scrap Tires as Tire-Derived Fuel |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.