ASTM D 581/D581M : 2012
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Standard Specification for Glass Fiber Greige Braided Tubular Sleeving (Withdrawn 2021)
Hardcopy , PDF
21-01-2021
English
26-08-2012
Important note : Users cannot be edited or removed once added to your Multi user PDF.| Committee |
D 13
|
| DocumentType |
Standard
|
| Pages |
6
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Withdrawn
|
| Supersedes |
1.1 This specification covers the requirements for continuous glass filament greige braided tubular sleeving and is suitable for use as electrical insulation and for structural and mechanical applications.
1.2 This specification is intended to assist ultimate users by designating the types of these products that are typical in the industry.
1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| ASTM D 1907 : 1997 | Standard Test Method for Linear Density of Yarn (Yarn Number) by the Skein Method |
| ASTM D 1423 : 2002 | Standard Test Method for Twist in Yarns by Direct-Counting |
| ASTM D 1059 : 1997 | Standard Test Method for Yarn Number Based on Short-Length Specimens |
| ASTM D 1907 : 2007 | Standard Test Method for Linear Density of Yarn (Yarn Number) by the Skein Method |
| ASTM D 1907 : 2001 | Standard Test Method for Linear Density of Yarn (Yarn Number) by the Skein Method |
| ASTM D 1776 : 1998 : EDT 1 | Standard Practice for Conditioning and Testing Textiles |
| ASTM D 1776 : 1967 : EDT 1 | Standard Method Of Conditioning Textiles And Textile Products For Testing |
| ASTM D 3773 : 2007 | Standard Test Methods for Length of Woven Fabric |
| ASTM D 3775 : 2017 | Standard Test Method for End (Warp) and Pick (Filling) Count of Woven Fabrics |
| ASTM D 3775 : 1998 | Standard Test Method for Fabric Count of Woven Fabric |
| ASTM D 1059 : 2001 | Standard Test Method for Yarn Number Based on Short-Length Specimens (Withdrawn 2010) |
| ASTM D 1776 : 2004 | Standard Practice for Conditioning and Testing Textiles |
| ASTM D 1423 : 1999 | Standard Test Method for Twist in Yarns by Direct-Counting |
| ASTM D 1776 : 2008 : EDT 1 | Standard Practice for Conditioning and Testing Textiles |
| ASTM D 3775 : 2002 | Standard Test Method for Fabric Count of Woven Fabric |
| ASTM D 1776 : 2008 | Standard Practice for Conditioning and Testing Textiles |
| ASTM D 3775 : 2007 | Standard Test Method for Warp (End) and Filling (Pick) Count of Woven Fabrics |
| ASTM D 1423 : 2002 : R2008 | Standard Test Method for Twist in Yarns by Direct-Counting |
| ASTM D 3773 : 1990 : R2002 | Standard Test Methods for Length of Woven Fabric |
| ASTM D 3775 : 2012 | Standard Test Method for Warp (End) and Filling (Pick) Count of Woven Fabrics |
| ASTM D 3775 : 2003 : REV A | Standard Test Method for Fabric Count of Woven Fabric |
| ASTM D 4963 : 1999 | Standard Test Method for Ignition Loss of Glass Strands and Fabrics |
| ASTM D 1059 : 2017 | Standard Test Method for Yarn Number Based on Short-Length Specimens |
| ASTM D 3775 : 2007 : REV A | Standard Test Method for Warp (End) and Filling (Pick) Count of Woven Fabrics |
| ASTM D 3775 : 2017 : EDT 1 | Standard Test Method for End (Warp) and Pick (Filling) Count of Woven Fabrics |
| ASTM D 4963 : 2004 | Standard Test Method for Ignition Loss of Glass Strands and Fabrics |
| ASTM D 3775 : 2008 | Standard Test Method for Warp (End) and Filling (Pick) Count of Woven Fabrics |
| ASTM D 7018 : 2004 | Standard Terminology Relating to Glass Fiber and Its Products |
| ASTM D 3773 : 1990 : R1996 : EDT 1 | Standard Test Methods for Length of Woven Fabric |
| ASTM D 3775 : 2003 | Standard Test Method for Fabric Count of Woven Fabric |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.