ASTM D 5817 : 2003 : REV A : R2014
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practice for Carbon Black, Pelleted—Reduction, Blending, and Drying of Gross Samples for Testing
Available format(s)
Hardcopy , PDF
Superseded date
17-02-2020
Superseded by
Language(s)
English
Published date
05-11-2014
Important note : Users cannot be edited or removed once added to your Multi user PDF.CONTAINED IN VOL. 09.01, 2015 Describes the procedure for blending of pelleted carbon black, the procedure for the reduction of gross samples of pelleted carbon black to the appropriate size for testing and the preparation of the sample for testing.
| Committee |
D 24
|
| DocumentType |
Standard Practice
|
| Pages |
4
|
| ProductNote |
Reconfirmed 2014
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This practice describes the procedure for blending of pelleted carbon black, the procedure for the reduction of gross samples of pelleted carbon black to the appropriate size for testing and the preparation of the sample for testing. These techniques are intended to minimize variations in measured characteristics between test samples. Standard terminology relating to carbon black samples is found in Terminology D3053.
1.2The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| ASTM D 1508 : 2012 : R2017 | Standard Test Method for Carbon Black, Pelleted Fines and Attrition |
| ASTM D 1799 : 2003 : REV A : R2014 | Standard Practice for Carbon Black—Sampling Packaged Shipments |
| ASTM D 1511 : 2012 : R2017 | Standard Test Method for Carbon Black—Pellet Size Distribution |
| ASTM D 1900 : 2006 : R2015 | Standard Practice for Carbon Black—Sampling Bulk Shipments |
| ASTM D 1509 : 1995 : R2012 | Standard Test Methods for Carbon Black—Heating Loss |
| ASTM D 1900 : 2006 : R2015 | Standard Practice for Carbon Black—Sampling Bulk Shipments |
| ASTM D 3191 : 2002 | Standard Test Methods for Carbon Black in SBR (Styrene-Butadiene-Rubber)-Recipe and Evaluation Procedures |
| ASTM D 3493 : 2001 | Standard Test Method for Carbon Black—Oil Absorption Number of Compressed Sample |
| ASTM D 5230 : 2005 | Standard Test Method for Carbon Black—Automated Individual Pellet Hardness |
| ASTM D 2414 : 2008 | Standard Test Method for Carbon Black<span class='unicode'>—</span>Oil Absorption Number (OAN) |
| ASTM D 3493 : 2009 | Standard Test Method for Carbon Black-Oil Absorption Number of Compressed Sample (COAN) |
| ASTM D 3493 : 2006 : EDT 1 | Standard Test Method for Carbon Black-Oil Absorption Number of Compressed Sample (COAN) |
| ASTM D 2414 : 2008 : REV A | Standard Test Method for Carbon Black<span class='unicode'>—</span>Oil Absorption Number (OAN) |
| ASTM D 1765 : 2005 : REV A : EDT 1 | Standard Classification System for Carbon Blacks Used in Rubber Products |
| ASTM D 3191 : 2010 : R2014 | Standard Test Methods for Carbon Black in SBR (Styrene-Butadiene Rubber)—Recipe and Evaluation Procedures |
| ASTM D 5230 : 2003 | Standard Test Method for Carbon Black—Automated Individual Pellet Hardness |
| ASTM D 3192 : 2009 | Standard Test Methods for Carbon Black Evaluation in NR (Natural Rubber) |
| ASTM D 1900 : 1994 : R1998 | Standard Practice for Carbon Black-Sampling Bulk Shipments |
| ASTM D 3493 : 2006 | Standard Test Method for Carbon Black-Oil Absorption Number of Compressed Sample (COAN) |
| ASTM D 3053 : 2015 | Standard Terminology Relating to Carbon Black |
| ASTM D 1513 : 2004 | Standard Test Method for Carbon Black, Pelleted—Pour Density |
| ASTM D 3265 : 2011 | Standard Test Method for Carbon Black-Tint Strength |
| ASTM D 3493 : 2004 | Standard Test Method for Carbon Black—Oil Absorption Number of Compressed Sample (COAN) |
| ASTM D 1508 : 2002 : R2007 : EDT 1 | Standard Test Method for Carbon Black, Pelleted Fines and Attrition |
| ASTM D 1511 : 2000 : EDT 1 | Standard Test Method for Carbon Black-Pellet Size Distribution |
| ASTM D 1799 : 1993 : R1997 | Standard Practice for Carbon Black-Sampling Packaged Shipments |
| ASTM D 1765 : 2003 | Standard Classification System for Carbon Blacks Used in Rubber Products |
| ASTM D 2414 : 2000 : REV A | Standard Test Method for Carbon Black—Oil Absorption Number |
| ASTM D 1510 : 2007 | Standard Test Method for Carbon Black-Iodine Adsorption Number |
| ASTM D 1799 : 2019 | Standard Practice for Carbon Black—Sampling Packaged Shipments |
| ASTM D 1510 : 2019 | Standard Test Method for Carbon Black—Iodine Adsorption Number |
| ASTM D 1618 : 2018 | Standard Test Method for Carbon Black Extractables—Transmittance of Toluene Extract |
| ASTM D 2414 : 2003 | Standard Test Method for Carbon Black—Oil Absorption Number (OAN) |
| ASTM D 1765 : 2004 : EDT 1 | Standard Classification System for Carbon Blacks Used in Rubber Products |
| ASTM D 3192 : 2005 | Standard Test Methods for Carbon Black Evaluation in NR (Natural Rubber) |
| ASTM D 2414 : 2016 | Standard Test Method for Carbon Black—Oil Absorption Number (OAN) |
| ASTM D 1514 : 2004 | Standard Test Method for Carbon Black—Sieve Residue |
| ASTM D 1510 : 2008 : REV B | Standard Test Method for Carbon Black<span class='unicode'>—</span>Iodine Adsorption Number |
| ASTM D 1619 : 2016 : REV A | Standard Test Methods for Carbon Black—Sulfur Content |
| ASTM D 6556 : 2009 | Standard Test Method for Carbon Black-Total and External Surface Area by Nitrogen Adsorption |
| ASTM D 1765 : 2017 | Standard Classification System for Carbon Blacks Used in Rubber Products |
| ASTM D 3265 : 2017 : EDT 1 | Standard Test Method for Carbon Black—Tint Strength |
| ASTM D 2414 : 2006 : REV A | Standard Test Method for Carbon Black-Oil Absorption Number (OAN) |
| ASTM D 1510 : 2019 : REV A | Standard Test Method for Carbon Black—Iodine Adsorption Number |
| ASTM D 6556 : 2007 | Standard Test Method for Carbon Black-Total and External Surface Area by Nitrogen Adsorption |
| ASTM D 3053 : 2008 | Standard Terminology Relating to Carbon Black |
| ASTM D 3493 : 2003 | Standard Test Method for Carbon Black—Oil Absorption Number of Compressed Sample |
| ASTM D 2414 : 2013 | Standard Test Method for Carbon Black—Oil Absorption Number (OAN) |
| ASTM D 1508 : 2002 : EDT 1 | Standard Test Method for Carbon Black, Pelleted Fines and Attrition |
| ASTM D 1512 : 2015 : REV B | Standard Test Methods for Carbon Black—pH Value |
| ASTM D 1510 : 2011 | Standard Test Method for Carbon Black<span class='unicode'>—</span>Iodine Adsorption Number |
| ASTM D 1512 : 1995 : R2000 | Standard Test Methods for Carbon Black-pH Value |
| ASTM D 6556 : 2002 : REV A | Standard Test Method for Carbon Black—Total and External Surface Area by Nitrogen Adsorption |
| ASTM D 3191 : 2009 | Standard Test Methods for Carbon Black in SBR (Styrene-Butadiene Rubber)<span class='unicode'>—</span>Recipe and Evaluation Procedures |
| ASTM D 1508 : 2002 : R2007 | Standard Test Method for Carbon Black, Pelleted Fines and Attrition |
| ASTM D 3265 : 2015 : REV A | Standard Test Method for Carbon Black—Tint Strength |
| ASTM D 1799 : 2003 : REV A | Standard Practice for Carbon Black—Sampling Packaged Shipments |
| ASTM D 1510 : 2008 | Standard Test Method for Carbon Black<span class='unicode'>—</span>Iodine Adsorption Number |
| ASTM D 1510 : 2016 : REV A | Standard Test Method for Carbon Black—Iodine Adsorption Number |
| ASTM D 3053 : 2008 : REV B | Standard Terminology Relating to Carbon Black |
| ASTM D 1765 : 2014 | Standard Classification System for Carbon Blacks Used in Rubber Products |
| ASTM D 3053 : 1999 : EDT 1 | Standard Terminology Relating to Carbon Black |
| ASTM D 6556 : 2003 | Standard Test Method for Carbon Black—Total and External Surface Area by Nitrogen Adsorption |
| ASTM D 1765 : 2000 : REV A | Standard Classification System for Carbon Blacks Used in Rubber Products |
| ASTM D 2414 : 2011 | Standard Test Method for Carbon Black<span class='unicode'>—</span>Oil Absorption Number (OAN) |
| ASTM D 1510 : 2003 | Standard Test Method for Carbon Black—Iodine Adsorption Number |
| ASTM D 3493 : 2019 | Standard Test Method for Carbon Black—Oil Absorption Number of Compressed Sample (COAN) |
| ASTM D 2414 : 2005 : REV A | Standard Test Method for Carbon Black—Oil Absorption Number (OAN) |
| ASTM D 5230 : 2014 | Standard Test Method for Carbon Black—Automated Individual Pellet Hardness |
| ASTM D 3493 : 2007 | Standard Test Method for Carbon Black-Oil Absorption Number of Compressed Sample (COAN) |
| ASTM D 1512 : 2015 | Standard Test Methods for Carbon Black—pH Value |
| ASTM D 3192 : 2000 | Standard Test Methods for Carbon Black Evaluation in NR (Natural Rubber) |
| ASTM D 3493 : 2014 | Standard Test Method for Carbon Black—Oil Absorption Number of Compressed Sample (COAN) |
| ASTM D 1513 : 2005 : EDT 1 | Standard Test Method for Carbon Black, Pelleted—Pour Density |
| ASTM D 3265 : 2015 | Standard Test Method for Carbon Black—Tint Strength |
| ASTM D 2414 : 2005 | Standard Test Method for Carbon Black—Oil Absorption Number (OAN) |
| ASTM D 5230 : 2000 | Standard Test Method for Carbon Black-Automated Individual Pellet Hardness |
| ASTM D 3265 : 2003 | Standard Test Method for Carbon Black—Tint Strength |
| ASTM D 3053 : 2010 | Standard Terminology Relating to Carbon Black |
| ASTM D 1512 : 2005 | Standard Test Methods for Carbon Black-pH Value |
| ASTM D 5230 : 2012 : REV A | Standard Test Method for Carbon Black—Automated Individual Pellet Hardness |
| ASTM D 1618 : 1999 : R2004 | Standard Test Method for Carbon Black Extractables—Transmittance of Toluene Extract |
| ASTM D 1510 : 2017 | Standard Test Method for Carbon Black—Iodine Adsorption Number |
| ASTM D 3191 : 2009 : EDT 1 | Standard Test Methods for Carbon Black in SBR (Styrene-Butadiene Rubber)<span class='unicode'>—</span>Recipe and Evaluation Procedures |
| ASTM D 6556 : 2019 | Standard Test Method for Carbon Black—Total and External Surface Area by Nitrogen Adsorption |
| ASTM D 1765 : 2018 | Standard Classification System for Carbon Blacks Used in Rubber Products |
| ASTM D 1618 : 1999 : R2011 | Standard Test Method for Carbon Black Extractables<char: emdash>Transmittance of Toluene Extract |
| ASTM D 1799 : 2003 | Standard Practice for Carbon Black—Sampling Packaged Shipments |
| ASTM D 1506 : 1999 : R2013 | Standard Test Methods for Carbon Black—Ash Content |
| ASTM D 3493 : 2000 : REV A | Standard Test Method for Carbon Black—Oil Absorption Number of Compressed Sample |
| ASTM D 1765 : 2001 : EDT 1 | Standard Classification System for Carbon Blacks Used in Rubber Products |
| ASTM D 1619 : 2003 : R2008 | Standard Test Methods for Carbon Black<span class='unicode'>—</span>Sulfur Content |
| ASTM D 2414 : 2012 | Standard Test Method for Carbon Black—Oil Absorption Number (OAN) |
| ASTM D 3265 : 2006 | Standard Test Method for Carbon Black-Tint Strength |
| ASTM D 2414 : 2019 | Standard Test Method for Carbon Black—Oil Absorption Number (OAN) |
| ASTM D 1506 : 2015 : REDLINE | Standard Test Methods for Carbon Black—Ash Content |
| ASTM D 1508 : 2012 : R2017 | Standard Test Method for Carbon Black, Pelleted Fines and Attrition |
| ASTM D 1514 : 2004 : R2011 | Standard Test Method for Carbon Black<char: emdash>Sieve Residue |
| ASTM D 1765 : 2004 : REV A | Standard Classification System for Carbon Blacks Used in Rubber Products |
| ASTM D 1900 : 2006 | Standard Practice for Carbon Black-Sampling Bulk Shipments |
| ASTM D 5230 : 2010 | Standard Test Method for Carbon Black—Automated Individual Pellet Hardness |
| ASTM D 3265 : 2013 : REV A | Standard Test Method for Carbon Black—Tint Strength |
| ASTM D 5230 : 2009 | Standard Test Method for Carbon Black—Automated Individual Pellet Hardness |
| ASTM D 5230 : 2014 : EDT 1 | Standard Test Method for Carbon Black—Automated Individual Pellet Hardness |
| ASTM D 3265 : 2005 | Standard Test Method for Carbon Black—Tint Strength |
| ASTM D 1511 : 2000 : EDT 2 | Standard Test Method for Carbon Black-Pellet Size Distribution |
| ASTM D 1513 : 2005 : R2012 | Standard Test Method for Carbon Black, Pelleted—Pour Density |
| ASTM D 1509 : 2015 | Standard Test Methods for Carbon Black—Heating Loss |
| ASTM D 3053 : 2004 | Standard Terminology Relating to Carbon Black |
| ASTM D 1510 : 2005 : REV A | Standard Test Method for Carbon Black—Iodine Adsorption Number |
| ASTM D 3265 : 2019 : REV A | Standard Test Method for Carbon Black—Tint Strength |
| ASTM D 1511 : 2000 : R2006 | Standard Test Method for Carbon Black—Pellet Size Distribution |
| ASTM D 1765 : 2001 | Standard Classification System for Carbon Blacks Used in Rubber Products |
| ASTM D 3265 : 2007 | Standard Test Method for Carbon Black-Tint Strength |
| ASTM D 3053 : 2005 | Standard Terminology Relating to Carbon Black |
| ASTM D 1510 : 2013 | Standard Test Method for Carbon Black—Iodine Adsorption Number |
| ASTM D 3053 : 2017 | Standard Terminology Relating to Carbon Black |
| ASTM D 1509 : 1995 : R2000 | Standard Test Methods for Carbon Black-Heating Loss |
| ASTM D 3053 : 1999 | Standard Terminology Relating to Carbon Black |
| ASTM D 1765 : 2016 | Standard Classification System for Carbon Blacks Used in Rubber Products |
| ASTM D 1514 : 2001 | Standard Test Method for Carbon Black—Sieve Residue |
| ASTM D 3493 : 2016 | Standard Test Method for Carbon Black—Oil Absorption Number of Compressed Sample (COAN) |
| ASTM D 2414 : 2002 | Standard Test Method for Carbon Black—Oil Absorption Number |
| ASTM D 2414 : 2016 : EDT 1 | Standard Test Method for Carbon Black—Oil Absorption Number (OAN) |
| ASTM D 3493 : 2018 | Standard Test Method for Carbon Black—Oil Absorption Number of Compressed Sample (COAN) |
| ASTM D 6556 : 2002 | Standard Test Method for Carbon Black—Total and External Surface Area by Nitrogen Adsorption |
| ASTM D 1508 : 1999 | Standard Test Method for Carbon Black, Pelleted-Fines and Attrition |
| ASTM D 1508 : 2002 : EDT 2 | Standard Test Method for Carbon Black, Pelleted Fines and Attrition |
| ASTM D 1508 : 2012 | Standard Test Method for Carbon Black, Pelleted Fines and Attrition |
| ASTM D 6556 : 2017 | Standard Test Method for Carbon Black—Total and External Surface Area by Nitrogen Adsorption |
| ASTM D 1510 : 1999 | Standard Test Method for Carbon Black—Iodine Adsorption Number |
| ASTM D 5230 : 2004 | Standard Test Method for Carbon Black—Automated Individual Pellet Hardness |
| ASTM D 1619 : 2010 | Standard Test Methods for Carbon Black<span class='unicode'>—</span>Sulfur Content |
| ASTM D 1765 : 2005 : REV A | Standard Classification System for Carbon Blacks Used in Rubber Products |
| ASTM D 3191 : 2010 | Standard Test Methods for Carbon Black in SBR (Styrene-Butadiene Rubber)<span class='unicode'>—</span>Recipe and Evaluation Procedures |
| ASTM D 1765 : 2013 | Standard Classification System for Carbon Blacks Used in Rubber Products |
| ASTM D 1799 : 2003 : REV A : R2008 | Standard Practice for Carbon Black<span class='unicode'>—</span>Sampling Packaged Shipments |
| ASTM D 1514 : 2015 | Standard Test Method for Carbon Black—Sieve Residue |
| ASTM D 1508 : 2001 | Standard Test Method for Carbon Black, Pelleted-Fines and Attrition |
| ASTM D 1513 : 2005 : EDT 2 | Standard Test Method for Carbon Black, Pelleted—Pour Density |
| ASTM D 2414 : 2009 : REV A | Standard Test Method for Carbon Black<span class='unicode'>—</span>Oil Absorption Number (OAN) |
| ASTM D 1510 : 2009 | Standard Test Method for Carbon Black<span class='unicode'>—</span>Iodine Adsorption Number |
| ASTM D 1510 : 2012 | Standard Test Method for Carbon Black—Iodine Adsorption Number |
| ASTM D 1513 : 1999 : REV A : EDT 1 | Standard Test Method for Carbon Black, Pelleted-Pour Density |
| ASTM D 1799 : 2002 | Standard Practice for Carbon Black—Sampling Packaged Shipments |
| ASTM D 1511 : 2010 | Standard Test Method for Carbon Black—Pellet Size Distribution |
| ASTM D 3493 : 2004 : REV A | Standard Test Method for Carbon Black—Oil Absorption Number of Compressed Sample (COAN) |
| ASTM D 2414 : 2006 | Standard Test Method for Carbon Black-Oil Absorption Number (OAN) |
| ASTM D 3053 : 2006 | Standard Terminology Relating to Carbon Black |
| ASTM D 3265 : 2017 | Standard Test Method for Carbon Black—Tint Strength |
| ASTM D 1765 : 2006 | Standard Classification System for Carbon Blacks Used in Rubber Products |
| ASTM D 1510 : 2008 : REV C | Standard Test Method for Carbon Black<span class='unicode'>—</span>Iodine Adsorption Number |
| ASTM D 1900 : 1994 : R2002 | Standard Practice for Carbon Black—Sampling Bulk Shipments |
| ASTM D 1510 : 2007 : REV A | Standard Test Method for Carbon Black-Iodine Adsorption Number |
| ASTM D 3265 : 2019 : REV B | Standard Test Method for Carbon Black—Tint Strength |
| ASTM D 2414 : 2018 : REV A | Standard Test Method for Carbon Black—Oil Absorption Number (OAN) |
| ASTM D 2414 : 2017 | Standard Test Method for Carbon Black—Oil Absorption Number (OAN) |
| ASTM D 3191 : 2006 : EDT 1 | Standard Test Methods for Carbon Black in SBR (Styrene-Butadiene Rubber)<span class='unicode'>—</span>Recipe and Evaluation Procedures |
| ASTM D 3053 : 2008 : REV A | Standard Terminology Relating to Carbon Black |
| ASTM D 1618 : 1999 | Standard Test Method for Carbon Black Extractables-Transmittance of Toluene Extract |
| ASTM D 3265 : 2013 | Standard Test Method for Carbon Black—Tint Strength |
| ASTM D 1900 : 2019 | Standard Practice for Carbon Black—Sampling Bulk Shipments |
| ASTM D 2414 : 2014 | Standard Test Method for Carbon Black—Oil Absorption Number (OAN) |
| ASTM D 5230 : 2004 : EDT 1 | Standard Test Method for Carbon Black—Automated Individual Pellet Hardness |
| ASTM D 3191 : 2006 | Standard Test Methods for Carbon Black in SBR (Styrene-Butadiene Rubber)-Recipe and Evaluation Procedures |
| ASTM D 2414 : 2006 : REV A : EDT 1 | Standard Test Method for Carbon Black-Oil Absorption Number (OAN) |
| ASTM D 6556 : 2001 | Standard Test Method for Carbon Black—Total and External Surface Area by Nitrogen Adsorption |
| ASTM D 3053 : 2013 : REV A | Standard Terminology Relating to Carbon Black |
| ASTM D 3053 : 2017 : REV A | Standard Terminology Relating to Carbon Black |
| ASTM D 6556 : 2000 : REV A | Standard Test Method for Carbon Black—Total and External Surface Area by Nitrogen Adsorption |
| ASTM D 2414 : 2002 : REV A | Standard Test Method for Carbon Black—Oil Absorption Number |
| ASTM D 1511 : 2012 : R2017 | Standard Test Method for Carbon Black—Pellet Size Distribution |
| ASTM D 3053 : 2006 : REV A | Standard Terminology Relating to Carbon Black |
| ASTM D 6556 : 2014 | Standard Test Method for Carbon Black—Total and External Surface Area by Nitrogen Adsorption |
| ASTM D 1511 : 2012 | Standard Test Method for Carbon Black—Pellet Size Distribution |
| ASTM D 1512 : 2005 : R2012 | Standard Test Methods for Carbon Black—pH Value |
| ASTM D 1510 : 2017-11 | TEST METHOD FOR CARBON BLACK - IODINE ADSORPTION NUMBER |
| ASTM D 5230 : 2012 | Standard Test Method for Carbon Black—Automated Individual Pellet Hardness |
| ASTM D 6556 : 2001 : REV A | Standard Test Method for Carbon Black—Total and External Surface Area by Nitrogen Adsorption |
| ASTM D 1510 : 2006 : REV A | Standard Test Method for Carbon Black-Iodine Adsorption Number |
| ASTM D 2414 : 2001 | Standard Test Method for Carbon Black—Oil Absorption Number |
| ASTM D 1510 : 2002 : REV A | Standard Test Method for Carbon Black—Iodine Adsorption Number |
| ASTM D 1618 : 2017 | Standard Test Method for Carbon Black Extractables—Transmittance of Toluene Extract |
| ASTM D 1509 : 2018 | Standard Test Methods for Carbon Black—Heating Loss |
| ASTM D 3493 : 2018 : REV A | Standard Test Method for Carbon Black—Oil Absorption Number of Compressed Sample (COAN) |
| ASTM D 1510 : 2006 | Standard Test Method for Carbon Black—Iodine Adsorption Number |
| ASTM D 1619 : 1999 | Standard Test Methods for Carbon Black-Sulfur Content |
| ASTM D 3493 : 2013 | Standard Test Method for Carbon Black—Oil Absorption Number of Compressed Sample (COAN) |
| ASTM D 1514 : 2015 : REDLINE | Standard Test Method for Carbon Black—Sieve Residue |
| ASTM D 2414 : 2004 | Standard Test Method for Carbon Black—Oil Absorption Number (OAN) |
| ASTM D 3265 : 2002 | Standard Test Method for Carbon Black—Tint Strength |
| ASTM D 1510 : 2016 | Standard Test Method for Carbon Black—Iodine Adsorption Number |
| ASTM D 3191 : 2000 | Standard Test Methods for Carbon Black in SBR (Styrene-Butadiene-Rubber)-Recipe and Evaluation Procedures |
| ASTM D 1765 : 2010 | Standard Classification System for Carbon Blacks Used in Rubber Products |
| ASTM D 1511 : 2000 | Standard Test Method for Carbon Black-Pellet Size Distribution |
| ASTM D 1510 : 2005 | Standard Test Method for Carbon Black—Iodine Adsorption Number |
| ASTM D 1619 : 2003 | Standard Test Methods for Carbon Black—Sulfur Content |
| ASTM D 3053 : 2004 : REV B | Standard Terminology Relating to Carbon Black |
| ASTM D 1510 : 2010 | Standard Test Method for Carbon Black<span class='unicode'>—</span>Iodine Adsorption Number |
| ASTM D 5230 : 2000 : EDT 1 | Standard Test Method for Carbon Black—Automated Individual Pellet Hardness |
| ASTM D 1765 : 2004 | Standard Classification System for Carbon Blacks Used in Rubber Products |
| ASTM D 1513 : 2005 : R2017 | Standard Test Method for Carbon Black, Pelleted—Pour Density |
| ASTM D 3053 : 2013 | Standard Terminology Relating to Carbon Black |
| ASTM D 6556 : 2004 | Standard Test Method for Carbon Black-Total and External Surface Area by Nitrogen Adsorption |
| ASTM D 3053 : 2017 : REV A : EDT 1 | Standard Terminology Relating to Carbon Black |
| ASTM D 1510 : 2001 : REV A | Standard Test Method for Carbon Black—Iodine Adsorption Number |
| ASTM D 3192 : 2002 | Standard Test Methods for Carbon Black Evaluation in NR (Natural Rubber) |
| ASTM D 1619 : 2011 | Standard Test Methods for Carbon Black<span class='unicode'>—</span>Sulfur Content |
| ASTM D 1510 : 2002 | Standard Test Method for Carbon Black—Iodine Adsorption Number |
| ASTM D 5230 : 2000 : EDT 2 | Standard Test Method for Carbon Black—Automated Individual Pellet Hardness |
| ASTM D 5230 : 2013 | Standard Test Method for Carbon Black—Automated Individual Pellet Hardness |
| ASTM D 2414 : 2018 | Standard Test Method for Carbon Black—Oil Absorption Number (OAN) |
| ASTM D 1513 : 1999 : REV A : R2004 | Standard Test Method for Carbon Black, Pelleted—Pour Density |
| ASTM D 6556 : 2016 | Standard Test Method for Carbon Black—Total and External Surface Area by Nitrogen Adsorption |
| ASTM D 1512 : 2015 : REV A | Standard Test Methods for Carbon Black—pH Value |
| ASTM D 1510 : 2009 : REV B | Standard Test Method for Carbon Black<span class='unicode'>—</span>Iodine Adsorption Number |
| ASTM D 1900 : 2006 : R2011 | Standard Practice for Carbon Black<char: emdash>Sampling Bulk Shipments |
| ASTM D 1506 : 1999 : R2007 | Standard Test Methods for Carbon Black-Ash Content |
| ASTM D 3192 : 2009 : R2014 | Standard Test Methods for Carbon Black Evaluation in NR (Natural Rubber) |
| ASTM D 1514 : 2000 | Standard Test Method for Carbon Black—Sieve Residue |
| ASTM D 1506 : 1999 | Standard Test Methods for Carbon Black-Ash Content |
| ASTM D 3265 : 2019 | Standard Test Method for Carbon Black—Tint Strength |
| ASTM D 3265 : 2001 | Standard Test Method for Carbon Black—Tint Strength |
| ASTM D 1510 : 2011 : REV A | Standard Test Method for Carbon Black<span class='unicode'>—</span>Iodine Adsorption Number |
| ASTM D 1510 : 2008 : REV A | Standard Test Method for Carbon Black<span class='unicode'>—</span>Iodine Adsorption Number |
| ASTM D 3192 : 2009 : R2019 | Standard Test Methods for Carbon Black Evaluation in NR (Natural Rubber) |
| ASTM D 1506 : 2015 | Standard Test Methods for Carbon Black—Ash Content |
| ASTM D 1510 : 2009 : REV A | Standard Test Method for Carbon Black<span class='unicode'>—</span>Iodine Adsorption Number |
| ASTM D 2414 : 2009 | Standard Test Method for Carbon Black<span class='unicode'>—</span>Oil Absorption Number (OAN) |
| ASTM D 3265 : 2014 | Standard Test Method for Carbon Black—Tint Strength |
| ASTM D 3265 : 2000 | Standard Test Method for Carbon Black—Tint Strength |
| ASTM D 2414 : 2013 : REV A | Standard Test Method for Carbon Black—Oil Absorption Number (OAN) |
| ASTM D 1509 : 1995 : R2007 | Standard Test Methods for Carbon Black-Heating Loss |
| ASTM D 1510 : 2001 | Standard Test Method for Carbon Black—Iodine Adsorption Number |
| ASTM D 3265 : 2017 : REV A | Standard Test Method for Carbon Black—Tint Strength |
| ASTM D 1765 : 2005 | Standard Classification System for Carbon Blacks Used in Rubber Products |
| ASTM D 1513 : 2005 | Standard Test Method for Carbon Black, Pelleted—Pour Density |
| ASTM D 6556 : 2010 | Standard Test Method for Carbon Black-Total and External Surface Area by Nitrogen Adsorption |
| ASTM D 5230 : 2009 : EDT 1 | Standard Test Method for Carbon Black—Automated Individual Pellet Hardness |
| ASTM D 1619 : 2016 | Standard Test Methods for Carbon Black—Sulfur Content |
| ASTM D 3053 : 2004 : REV A | Standard Terminology Relating to Carbon Black |
| ASTM D 1799 : 2003 : REV A : R2014 | Standard Practice for Carbon Black—Sampling Packaged Shipments |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.