Skip to content
Please enter a keyword to search

  • ASTM D 5846 : 2007 : R2017

    Current The latest, up-to-date edition.

    Standard Test Method for Universal Oxidation Test for Hydraulic and Turbine Oils Using the Universal Oxidation Test Apparatus

    Available format(s):  Hardcopy, PDF

    Language(s):  English

    Published date:  01-10-2017

    Publisher:  American Society for Testing and Materials

    Add To Cart

    Abstract - (Show below) - (Hide below)

    CONTAINED IN VOL. 05.03, 2017 Defines a procedure for evaluating the oxidation stability of petroleum base hydraulic oils and oils for steam and gas turbines.

    Scope - (Show below) - (Hide below)

    1.1This test method covers a procedure for evaluating the oxidation stability of petroleum base hydraulic oils and oils for steam and gas turbines.

    1.2This test method was developed to evaluate the oxidation stability of petroleum base hydraulic oils and oils for steam and gas turbines.

    1.2.1Rust and oxidation inhibited hydraulic, anti-wear hydraulic and turbine oils of ISO 32–68 viscosity were used to develop the precision statement. This test method has been used to evaluate the oxidation stability of fluids made with synthetic basestock and in-service oils; however, these fluids have not been used in cooperative testing to develop precision data.

    1.3The values stated in SI units are to be regarded as standard.

    1.3.1Exception—The values given in parentheses are for information only.

    1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Identified hazardous chemicals are listed in 7.3, 7.6, and 7.8. Before using this test method, refer to suppliers' safety labels, Material Safety Data Sheets, and other technical literature.

    1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

    General Product Information - (Show below) - (Hide below)

    Committee D 02
    Document Type Test Method
    Product Note Reconfirmed 2017
    Publisher American Society for Testing and Materials
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    ASTM D 6514 : 2003 : R2019 Standard Test Method for High Temperature Universal Oxidation Test for Turbine Oils
    ASTM D 4871 : 2011 : R2016 Standard Guide for Universal Oxidation/Thermal Stability Test Apparatus
    ASTM D 7155 : 2018 Standard Practice for Evaluating Compatibility of Mixtures of Turbine Lubricating Oils

    Standards Referencing This Book - (Show below) - (Hide below)

    ASTM D 4057 : 2019 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
    ASTM D 4871 : 2006 Standard Guide for Universal Oxidation/Thermal Stability Test Apparatus
    ASTM D 974 : 2014 : EDT 2 Standard Test Method for Acid and Base Number by Color-Indicator Titration
    ASTM D 4057 : 1995 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
    ASTM D 974 : 2001 Standard Test Method for Acid and Base Number by Color-Indicator Titration
    ASTM D 4740 : 2002 Standard Test Method for Cleanliness and Compatibility of Residual Fuels by Spot Test
    ASTM D 4871 : 2011 : R2022 Standard Guide for Universal Oxidation/Thermal Stability Test Apparatus
    BS 1829(1962) : LATEST REFERENCE TABLES FOR IRON V CONSTANTAN THERMOCOUPLES
    ASTM D 5770 : 2002 Standard Test Method for Semiquantitative Micro Determination of Acid Number of Lubricating Oils During Oxidation Testing
    ASTM D 664 : 2017 : REV A Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
    ASTM D 3339 : 1995 : EDT 2 Standard Test Method for Acid Number of Petroleum Products by Semi-Micro Color Indicator Titration
    ASTM D 4057 : 2012 : R2018 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
    ASTM B 1 : 1995 Standard Specification for Hard-Drawn Copper Wire
    ASTM D 943 : 2019 Standard Test Method for Oxidation Characteristics of Inhibited Mineral Oils
    ASTM D 974 : 2022 Standard Test Method for Acid and Base Number by Color-Indicator Titration
    ASTM D 4057 : 1981 : EDT 2 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
    ASTM D 4740 : 2004 : R2009 Standard Test Method for Cleanliness and Compatibility of Residual Fuels by Spot Test
    ASTM D 4740 : 1995 Standard Test Method for Cleanliness and Compatibility of Residual Fuels by Spot Test
    ASTM D 4740 : 2019 Standard Test Method for Cleanliness and Compatibility of Residual Fuels by Spot Test
    ASTM D 4740 : 2004 : R2014 Standard Test Method for Cleanliness and Compatibility of Residual Fuels by Spot Test
    ASTM D 974 : 2021 Standard Test Method for Acid and Base Number by Color-Indicator Titration
    ASTM D 5770 : 2011 : R2017 Standard Test Method for Semiquantitative Micro Determination of Acid Number of Lubricating Oils During Oxidation Testing
    ASTM D 5770 : 2023 Standard Test Method for Semiquantitative Micro Determination of Acid Number of Lubricating Oils During Oxidation Testing
    ASTM D 3339 : 2012 : R2017 Standard Test Method for Acid Number of Petroleum Products by Semi-Micro Color Indicator Titration
    ASTM D 4871 : 2011 Standard Guide for Universal Oxidation/Thermal Stability Test Apparatus
    ASTM D 3339 : 2012 Standard Test Method for Acid Number of Petroleum Products by Semi-Micro Color Indicator Titration
    ASTM D 4057 : 2006 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
    ASTM D 3339 : 2008 Standard Test Method for Acid Number of Petroleum Products by Semi-Micro Color Indicator Titration
    ASTM D 4057 : 2012 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
    ASTM D 5770 : 2002 : R2007 Standard Test Method for Semiquantitative Micro Determination of Acid Number of Lubricating Oils During Oxidation Testing
    ASTM D 664 : 1995 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
    ASTM D 943 : 2018 Standard Test Method for Oxidation Characteristics of Inhibited Mineral Oils
    ASTM D 3339 : 2011 Standard Test Method for Acid Number of Petroleum Products by Semi-Micro Color Indicator Titration
    ASTM D 3339 : 1995 : R2000 : EDT 1 Standard Test Method for Acid Number of Petroleum Products by Semi-Micro Color Indicator Titration
    ASTM D 664 : 2011 : REV A Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
    ASTM D 3339 : 2007 Standard Test Method for Acid Number of Petroleum Products by Semi-Micro Color Indicator Titration
    ASTM D 4057 : 2022 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
    ASTM D 4871 : 2000 Standard Guide for Universal Oxidation/Thermal Stability Test Apparatus
    ASTM D 943 : 1999 Standard Test Method for Oxidation Characteristics of Inhibited Mineral Oils
    ASTM D 3339 : 2004 Standard Test Method for Acid Number of Petroleum Products by Semi-Micro Color Indicator Titration
    ASTM D 4740 : 2004 Standard Test Method for Cleanliness and Compatibility of Residual Fuels by Spot Test
    ASTM D 4871 : 2011 : R2016 Standard Guide for Universal Oxidation/Thermal Stability Test Apparatus
    ASTM D 4057 : 1995 : R2000 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
    ASTM D 4740 : 1995 : R2000 Standard Test Method for Cleanliness and Compatibility of Residual Fuels by Spot Test
    ASTM D 3339 : 2021 Standard Test Method for Acid Number of Petroleum Products by Semi-Micro Color Indicator Titration
    ASTM D 4057 : 2006 : R2011 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
    ASTM D 943 : 2017-08 TEST METHOD FOR OXIDATION CHARACTERISTICS OF INHIBITED MINERAL OILS
    ASTM D 5770 : 1996 Standard Test Method for Semiquantitative Micro Determination of Acid Number of Lubricating Oils During Oxidation Testing
    ASTM D 3339 : 2002 Standard Test Method for Acid Number of Petroleum Products by Semi-Micro Color Indicator Titration
    ASTM D 5770 : 2011 Standard Test Method for Semiquantitative Micro Determination of Acid Number of Lubricating Oils During Oxidation Testing
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective