ASTM D 6193 : 2016 : REDLINE
Current
Current
The latest, up-to-date edition.
Standard Practice for Stitches and Seams
Available format(s)
PDF
Language(s)
English
Published date
01-01-2016
Important note : Users cannot be edited or removed once added to your Multi user PDF.CONTAINED IN VOL. 07.02, 2016 Describes the requirements and characteristics of stitches and seams used in the fabrication of sewn items.
| Committee |
D 13
|
| DevelopmentNote |
Supersedes FED STD 751 (02/2004)
|
| DocumentType |
Redline
|
| Pages |
143
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1This practice covers the requirements and characteristics of stitches and seams used in the fabrication of sewn items.
1.2This practice identifies the category, formation, and general purpose for stitch types and seam types used in the fabrication of sewn items.
1.3Subsequent to a general discussion of stitches and seams that include schematic indices, this practice is comprised of the following sections that are listed in the order in which they appear:
1.3.1Section 5—Classification of Stitch Types for which drawings are shown in Stitch Figs. 1-69,
Note 1:This type of stitching shall be produced by folding the edge of the material in an “S” fold with the raw edge turned under to form a finished edge, and stitching through the two folds with one row of stitches.
1.3.3Annex A1—Seam Assembly Recommendations.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| MIL-DTL-44436 Revision B:2012 | CLOTH, WIND RESISTANT POPLIN, NYLON/COTTON BLEND |
| MIL-DTL-31008 Revision A:2004 | Jacket, Security Forces, Cold Weather (No S/S Document) |
| A-A-59369 Base Document:2003 | UNDERSHIRT, SILK WEIGHT SPEAR SYSTEM, LIGHTWEIGHT ENVIRONMENTAL PROTECTION (LEP), LAYER-1 |
| A-A-50194 Revision B:2003 | HOOD, BALACLAVA, EXTENDED COLD WEATHER |
| ASTM F 696 : 2006 | Standard Specification for Leather Protectors for Rubber Insulating Gloves and Mittens |
| ASTM F 696 : 2006 : R2011 | Standard Specification for Leather Protectors for Rubber Insulating Gloves and Mittens |
| ASTM F 1085 : 2014 : REDLINE | Standard Specification for Mattress and Box Springs for Use in Berths in Marine Vessels |
| MIL-DTL-44048 Revision H:2000 | COATS, CAMOUFLAGE PATTERN, COMBAT |
| MIL-DTL-85633 Revision D:2016 | COVERALLS, FLYERS, ANTI-EXPOSURE, CWU-74/P, CWU-86/P, AND CWU-87/P |
| MIL-DTL-32082 Revision A:2012 | COVERALLS, MECHANICS, COLD WEATHER |
| ASTM D 204 : 2002 : R2010 : EDT 1 | Standard Test Methods for Sewing Threads |
| MIL-DTL-11922 Revision F:2016 | SCARF, BRANCH OF SERVICE, BIB TYPE |
| MIL-DTL-32130 Base Document:2003 | UNDERWEAR, CHEMICAL PROTECTIVE, TWO PIECE (UNDERSHIRT AND DRAWERS) |
| A-A-59483 Base Document:2004 | OVERALLS, POWERSTRETCH WITH "RAINBOW DROM SEAT" SPEAR SYSTEM: LAYER-3 |
| MIL-DTL-44105 Revision C:2008 | Hat, Sun, Hot Weather |
| A-A-55077 Revision A:2000 | Bag, Duffel (No S/S Document) |
| MIL-DTL-32149 Revision A:2007 | CLOTH, WATERPROOF, FLAME RESISTANT, MOISTURE VAPOR PERMEABLE |
| MIL-DTL-32063 Base Document:2000 | TARPAULINS, COTTON OR POLYESTER, FWWMR |
| ASTM E 1549/E1549M : 2013 | Standard Specification for ESD Controlled Garments Required in Cleanrooms and Controlled Environments for Spacecraft for Non-Hazardous and Hazardous Operations |
| ASTM D 7571 : 2010 : R2014 : EDT 1 | Standard Specification for Retained Sewn Seam Strength After Exposures to Hot Air and Open Flame |
| NFPA 1977 : 2016 | PROTECTIVE CLOTHING AND EQUIPMENT FOR WILDLAND FIRE FIGHTING |
| MIL-DTL-29378 Revision B:2008 | BELT, MAN'S: CEREMONIAL, OFFICERS (SAM BROWNE) |
| MIL-DTL-32102 Base Document:2002 | JOINT SERVICE LIGHTWEIGHT INTEGRATED SUIT TECHNOLOGY (JSLIST) COAT AND TROUSER, CHEMICAL PROTECTIVE |
| MIL-DTL-10035 Revision L:2001 | TENT, HEXAGONAL, LIGHTWEIGHT, M-1950 |
| DDD-F-416 Revision F:2005 | Flag, National, United States of America and Flag, Union Jack |
| MIL-DTL-83406 Revision C:2006 | ANTI-G GARMENT, CUTAWAY, CSU-13B/P |
| MIL-PRF-32107 Base Document:2002 | Hose, Air Duct, General Specification for |
| MIL-DTL-43492 Revision D:2000 | TENT SECTIONS, FRAME TYPE, EXPANDABLE |
| MIL-DTL-12354 Revision G:2000 | TENT, ARCTIC, 10 MAN |
| MIL-DTL-43455 Revision K:2007 | COAT, COLD WEATHER, FIELD |
| JJ-N-180 Revision H:2015 | NETS, LAUNDRY |
| MIL-DTL-43415 Revision D:2003 | CAP, SERVICE, MILITARY POLICE, WHITE |
| MIL-DTL-81905 Revision H:2016 | ANTI-G GARMENT, CSU-15A/P |
| OO-S-256 Revision K:2012 | Sewing Machine, Industrial, General Specification for |
| MIL-DTL-82288 Revision C:2000 | TARPAULIN: LAMINATED, VINYL-NYLON OR VINYL-POLYESTER, FLEXIBLE |
| MIL-DTL-0083406 Revision D Interim Revision:2010 | ANTI-G GARMENT, CUTAWAY, CSU-13B/P |
| MIL-DTL-32160 Base Document:2004 | COVER, REVERSIBLE, ADVANCED COMBAT HELMET |
| MIL-DTL-32147 Base Document:2004 | SOCKS, FLYER'S, ANTI-EXPOSURE, RUGGEDIZED |
| MIL-DTL-43741 Revision C:2007 | NECKERCHIEF, COTTON, KNITTED |
| MIL-DTL-32146 Revision A:2015 | WRIST SEAL, FLYER'S, ANTI-EXPOSURE, RUGGEDIZED |
| ASTM D 204 : 2002 : R2010 | Standard Test Methods for Sewing Threads |
| ASCE/SEI 55 10 : 2010 | TENSILE MEMBRANE STRUCTURES |
| MIL-DTL-32240 Base Document:2007 | Submarine Wetbag |
| MIL-DTL-32182 Base Document:2005 | COAT, OPERATIONAL DRESS UNIFORM (COAST GUARD) |
| A-A-59358 Base Document:2003 | UNDERSHIRT, MID WEIGHT, SPEAR SYSTEM, LIGHTWEIGHT ENVIRONMENTAL PROTECTION (LEP), LAYER-2 |
| MIL-DTL-3372 Revision G:2000 | CASE, TENTAGE REPAIR KIT |
| A-A-59329 Base Document:2003 | DRAWERS, SILK WEIGHT SPEAR SYSTEM, LIGHTWEIGHT ENVIRONMENTAL PROTECTION (LEP), LAYER-1 |
| MIL-DTL-32185 Base Document:2005 | TROUSERS, COLD WEATHER, UNIVERSAL CAMOUFLAGE |
| MIL-DTL-32145 Base Document:2004 | Neck Seal, Flyers\', Anti-Exposure, Ruggedized |
| MIL-DTL-44050 Revision B:2009 | CLOTH, BALLISTIC, ARAMID |
| MIL-DTL-32158 Base Document:2004 | TROUSERS, ALL-PURPOSE, ENVIRONMENTAL, CAMOUFLAGE |
| MIL-DTL-32094 Base Document:2001 | GLOVE, AIRCREW, COLD/WET PROTECTIVE, HAU-14/P |
| MIL-DTL-32184 Base Document:2005 | PARKA, COLD WEATHER, UNIVERSAL CAMOUFLAGE |
| MIL-DTL-484 Revision J:2006 | CLOTH, WIND RESISTANT OXFORD, COTTON, WATER REPELLENT TREATED |
| MIL-DTL-44419 Revision A:2006 | GLOVES, MEN'S AND WOMEN'S, INTERMEDIATE COLD/WET |
| MIL-DTL-85040 Revision D:2004 | DRAWERS AND UNDERSHIRTS, FLYERS, ANTI-EXPOSURE, ARAMID, HIGH TEMPERATURE RESISTANT, CWU-43/P AND CWU-44/P |
| ASTM E 1549/E1549M : 2013 : R2016 | Standard Specification for ESD Controlled Garments Required in Cleanrooms and Controlled Environments for Spacecraft for Non-Hazardous and Hazardous Operations |
| MIL-DTL-20277-2 Revision A:2014 | Sheath, for Combat Knife |
| A-A-59892 Revision A:2013 | Cover-Cargo-HEMTT-Truck |
| MIL-DTL-44132 Revision C:2000 | VEST, CONDITIONING MICROCLIMATE: AIR |
| AA-F-00360 Revision B Interim Revision:2002 | FILING CABINETS, STEEL, MAP AND PLAN, (SECTIONAL) |
| MIL-DTL-81543 Revision C:2010 | CONTAINER ASSEMBLIES, INFLATABLE LIFE RAFT |
| MIL-DTL-14645 Revision C:2002 | INSIGNIA, RANK AND GRADE, EMBROIDERED SHOULDER MARKS, AIR FORCE AND ARMY, GENERAL SPECIFICATION FOR |
| MIL-DTL-43342 Revision F:2005 | WEBBING ASSEMBLY, GENERAL SPECIFICATION FOR |
| MIL-DTL-7620 Revision D:2002 | PARACHUTES AND COMPONENTS, CARGO, EXTRACTION AND DECELERATION, GENERAL SPECIFICATION FOR |
| MIL-DTL-83776 Revision B:2001 | HELMET, FLYER'S, WINTER |
| MIL-DTL-43549 Revision D:2000 | CAP, COLD WEATHER, INSULATING, HELMET LINER |
| A-A-59327 Base Document:2003 | DRAWERS, MID WEIGHT, SPEAR SYSTEM, LIGHTWEIGHT ENVIRONMENTAL PROTECTION (LEP), LAYER-2 |
| MIL-DTL-32200 Base Document:2005 | COVER, ADVANCED COMBAT HELMET |
| MIL-DTL-43649 Revision D:2005 | PARACHUTES, CARGO, 12,26, AND 34 FOOT DIAMETER |
| MIL-STD-849 Revision C:2009 | INSPECTION REQUIREMENTS, DEFINITIONS AND CLASSIFICATION OF DEFECTS FOR PARACHUTES |
| MIL-DTL-44400 Revision A:2000 | TENT, FABRIC ASSEMBLIES, STANDARDIZED INTEGRATED COMMAND POST SYSTEM |
| MIL-DTL-20268 Revision H:2017 | FRAME, CAP |
| ASTM D 7571 : 2010 | Standard Specification for Retained Sewn Seam Strength After Exposures to Hot Air and Open Flame |
| ASTM D 1683/D1683M : 2017-04 | TEST METHOD FOR FAILURE IN SEWN SEAMS OF WOVEN FABRICS |
| MIL-DTL-44117 Revision B:2011 | Helmet, Combat Vehicle Crewman, Ballistic Shell (DH-132B) (No S/S Document) |
| MIL-DTL-18186 Revision E:2017 | CROWNS, SERVICE AND DRESS CAP |
| MIL-DTL-32117 Revision A:2004 | HELMET COVER, REVERSIBLE, MARPAT[TM] WOODLAND AND DESERT PATTERN CAMOUFLAGE, MARINE CORPS |
| MIL-DTL-3866 Revision H:2005 | Gloves, Cloth, Cotton, Knitted, Lightweight (No S/S Document) |
| ASTM D 7722 : 2017 : REDLINE | Standard Terminology Relating to Industrial Textile Stitches and Seams |
| MIL-DTL-32157 Base Document:2004 | PARKA, ALL-PURPOSE ENVIRONMENTAL, CAMOUFLAGE |
| SAE AS7365 | Duct Assembly, Ground, Conditioned Air, Metallic Reinforced, Low Pressure, 350 °F |
| ASTM D 204 : 2002 | Standard Test Methods for Sewing Threads |
| MIL-DTL-7567 Revision C:2002 | PARACHUTES, PERSONNEL, DETAIL MANUFACTURING INSTRUCTIONS FOR |
| MIL-DTL-52543 Revision E:2010 | LIGHT, MARKER, GROUND-OBSTRUCTION |
| MIL-DTL-9401 Revision C:2003 | CANOPY, PARACHUTE, RING SLOT, GENERAL SPECIFICATION FOR |
| MIL-DTL-6279 Revision M:2003 | PARKA, EXTREME COLD WEATHER, TYPE N-3B |
| MIL-DTL-85361 Revision A:2010 | CARRYING CASE ASSEMBLIES, INFLATABLE LIFE RAFT |
| MIL-DTL-43695 Revision C:2000 | FRAME SECTIONS, TENT, FRAME TYPE, EXPANDABLE |
| MIL-DTL-43335 Revision G:2000 | LINER, WET WEATHER PONCHO |
| ASTM D 204 : 2002 : R2016 | Standard Test Methods for Sewing Threads |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.