Skip to content
Please enter a keyword to search

  • ASTM D 6224 : 2016

    View superseded by
    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
    View superseded by

    Standard Practice for In-Service Monitoring of Lubricating Oil for Auxiliary Power Plant Equipment

    Available format(s):  Hardcopy, PDF

    Superseded date:  16-11-2023

    Language(s):  English

    Published date:  21-11-2016

    Publisher:  American Society for Testing and Materials

    Add To Cart

    Abstract - (Show below) - (Hide below)

    This practice covers the requirements for the effective monitoring of mineral oil and phosphate ester fluid lubricating oils in service auxiliary (non-turbine) equipment used for power generation.

    Scope - (Show below) - (Hide below)

    1.1This practice covers the requirements for the effective monitoring of mineral oil and phosphate ester fluid lubricating oils in service auxiliary (non-turbine) equipment used for power generation. Auxiliary equipment covered includes gears, hydraulic systems, diesel engines, pumps, compressors, and electrohydraulic control (EHC) systems. It includes sampling and testing schedules and recommended action steps, as well as information on how oils degrade.

    Note 1:Other types of synthetic lubricants are sometimes used but are not addressed in this practice because they represent only a small fraction of the fluids in use. Users of these fluids should consult the manufacturer to determine recommended monitoring practices.

    1.2This practice does not cover the monitoring of lubricating oil for steam and gas turbines. Rather, it is intended to complement Practice D4378.

    1.3The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

    1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

    General Product Information - (Show below) - (Hide below)

    Committee D 02
    Document Type Standard Practice
    Publisher American Society for Testing and Materials
    Status Superseded
    Superseded By
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    ASTM D 4378 : 2013 Standard Practice for In-Service Monitoring of Mineral Turbine Oils for Steam, Gas, and Combined Cycle Turbines
    ASTM D 7590 : 2009 : R2014 Standard Guide for Measurement of Remaining Primary Antioxidant Content In In-Service Industrial Lubricating Oils by Linear Sweep Voltammetry
    ASTM D 7720 : 2011 : R2017 Standard Guide for Statistically Evaluating Measurand Alarm Limits when Using Oil Analysis to Monitor Equipment and Oil for Fitness and Contamination
    ASTM D 8112 : 2017 Standard Guide for Obtaining In-Service Samples of Turbine Operation Related Lubricating Fluid
    ASTM D 6971 : 2009 : R2014 Standard Test Method for Measurement of Hindered Phenolic and Aromatic Amine Antioxidant Content in Non-zinc Turbine Oils by Linear Sweep Voltammetry
    ASTM D 8185 : 2018 Standard Guide for In-Service Lubricant Viscosity Measurement
    ASTM D 6810 : 2013 Standard Test Method for Measurement of Hindered Phenolic Antioxidant Content in Non-Zinc Turbine Oils by Linear Sweep Voltammetry
    ASTM D 4378 : 2020 Standard Practice for In-Service Monitoring of Mineral Turbine Oils for Steam, Gas, and Combined Cycle Turbines
    ASTM D 7669 : 2020 Standard Guide for Practical Lubricant Condition Data Trend Analysis
    ASTM D 7720 : 2021 Standard Guide for Statistically Evaluating Measurand Alarm Limits when Using Oil Analysis to Monitor Equipment and Oil for Fitness and Contamination

    Standards Referencing This Book - (Show below) - (Hide below)

    ASTM D 4057 : 2019 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
    ASTM D 2896 : 1998 Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration
    ASTM D 2896 : 2005 Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration
    ASTM D 4378 : 2003 Standard Practice for In-Service Monitoring of Mineral Turbine Oils for Steam and Gas Turbines
    ASTM D 974 : 2014 : EDT 2 Standard Test Method for Acid and Base Number by Color-Indicator Titration
    ASTM D 4057 : 1995 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
    ASTM D 974 : 2001 Standard Test Method for Acid and Base Number by Color-Indicator Titration
    ASTM D 2273 : 1997 : R2002 : EDT 1 Standard Test Method for Trace Sediment in Lubricating Oils
    ASTM D 3524 : 2004 Standard Test Method for Diesel Fuel Diluent in Used Diesel Engine Oils by Gas Chromatography (Withdrawn 2013)
    ASTM D 1401 : 2019 Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids
    ASTM D 7464 : 2020 Standard Practice for Manual Sampling of Liquid Fuels, Associated Materials and Fuel System Components for Microbiological Testing
    ASTM D 1298 : 2012 : REV A Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
    ASTM D 7669 : 2011 Standard Guide for Practical Lubricant Condition Data Trend Analysis
    ASTM D 7720:2011 Standard Guide for Statistically Evaluating Measurand Alarm Limits when Using Oil Analysis to Monitor Equipment and Oil for Fitness and Contamination
    ASTM E 1064 : 2012 Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration
    ASTM D 7155 : 2006 Standard Practice for Evaluating Compatibility of Mixtures of Turbine Lubricating Oils
    ASTM D 3427 : 2003 Standard Test Method for Air Release Properties of Petroleum Oils
    ASTM D 5185 : 1997 Standard Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
    ASTM D 2668 : 2002 : EDT 1 Standard Test Method for 2,6-di-tert-Butyl- p-Cresol and 2,6-di-tert-Butyl Phenol in Electrical Insulating Oil by Infrared Absorption
    ASTM D 4052 : 1996 : R2002 : EDT 1 Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter
    ASTM D 2422 : 1997 : R2007 Standard Classification of Industrial Fluid Lubricants by Viscosity System
    ASTM D 4739 : 2005 Standard Test Method for Base Number Determination by Potentiometric Titration
    ASTM D 1298 : 2012 : REV B Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
    ASTM D 3427 : 2015 Standard Test Method for Air Release Properties of Hydrocarbon Based Oils
    ASTM D 7687 : 2017 Standard Test Method for Measurement of Cellular Adenosine Triphosphate in Fuel and Fuel-associated Water With Sample Concentration by Filtration
    ASTM D 1533 : 2012 Standard Test Method for Water in Insulating Liquids by Coulometric Karl Fischer Titration
    ASTM D 2982 : 2007 Standard Test Methods for Detecting Glycol-Base Antifreeze in Used Lubricating Oils
    ASTM D 4057 : 2012 : R2018 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
    ASTM D 4052 : 2018 : REV A Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
    ASTM D 2422 : 1997 Standard Classification of Industrial Fluid Lubricants by Viscosity System
    ASTM D 2273 : 1997 : R2002 : EDT 2 Standard Test Method for Trace Sediment in Lubricating Oils
    ASTM D 6304:2016 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration
    ASTM D 1401 : 2018 : REV B Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids
    ASTM E 1064 : 2000 Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration
    ASTM D 3427 : 2014 : REV A Standard Test Method for Air Release Properties of Petroleum Oils
    ASTM D 2668 : 2007 : R2013 Standard Test Method for 2,6-di-tert-Butyl- p-Cresol and 2,6-di-tert-Butyl Phenol in Electrical Insulating Oil by Infrared Absorption
    ASTM D 4378 : 2012 Standard Practice for In-Service Monitoring of Mineral Turbine Oils for Steam, Gas, and Combined Cycle Turbines
    ASTM E 1064 : 2005 Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration
    ASTM D 7720 : 2021 Standard Guide for Statistically Evaluating Measurand Alarm Limits when Using Oil Analysis to Monitor Equipment and Oil for Fitness and Contamination
    ASTM D 2422 : 1997 : R2018 Standard Classification of Industrial Fluid Lubricants by Viscosity System
    ASTM D 6971 : 2009 : R2014 Standard Test Method for Measurement of Hindered Phenolic and Aromatic Amine Antioxidant Content in Non-zinc Turbine Oils by Linear Sweep Voltammetry
    ASTM D 6304 : 2004 : REV A : EDT 1 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fisher Titration
    ASTM D 2273 : 1997 Standard Test Method for Trace Sediment in Lubricating Oils
    ASTM D 1401 : 2018 Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids
    ASTM D 5185 : 2005 Standard Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
    ASTM D 1500 : 2004 Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)
    ASTM D 257 : 2014 Standard Test Methods for DC Resistance or Conductance of Insulating Materials
    ASTM D 1401 : 2009 Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids
    ASTM D 1298 : 1999 : R2005 Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
    ASTM D 7414 : 2021 Standard Test Method for Condition Monitoring of Oxidation in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
    ASTM D 4052 : 2009 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
    ASTM D 4057 : 1981 : EDT 2 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
    ASTM E 1064 : 2004 Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration
    ASTM D 5185 : 2002 Standard Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
    ASTM D 2982 : 2007 : R2013 Standard Test Methods for Detecting Glycol-Base Antifreeze in Used Lubricating Oils
    ASTM D 1401 : 1998 Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids
    ASTM D 1298 : 2012 : REV B : R2017 Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
    ASTM D 1298 : 2012 Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
    ASTM D 2896 : 2007 : REV A Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration
    ASTM D 6810 : 2002 Standard Test Method for Measurement of Hindered Phenolic Antioxidant Content in HL Turbine Oils by Linear Sweep Voltammetry
    ASTM D 2668 : 2007 Standard Test Method for 2,6-di-tert-Butyl- p-Cresol and 2,6-di-tert-Butyl Phenol in Electrical Insulating Oil by Infrared Absorption
    ASTM D 6971 : 2009 Standard Test Method for Measurement of Hindered Phenolic and Aromatic Amine Antioxidant Content in Non-zinc Turbine Oils by Linear Sweep Voltammetry
    ASTM D 6304 : 2007 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration (Withdrawn 2016)
    ASTM D 974 : 2021 Standard Test Method for Acid and Base Number by Color-Indicator Titration
    ASTM D 6304 : 2004 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fisher Titration
    ASTM D 1298 : 1999 : EDT 2 Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
    ASTM D 7978 : 2014 Standard Test Method for Determination of the Viable Aerobic Microbial Content of Fuels and Associated Water—Thixotropic Gel Culture Method
    ASTM D 5185 : 2018 Standard Test Method for Multielement Determination of Used and Unused Lubricating Oils and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
    ASTM D 2896 : 2011 Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration
    ASTM D 1500 : 2012 Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)
    ASTM D 6810 : 2013 Standard Test Method for Measurement of Hindered Phenolic Antioxidant Content in Non-Zinc Turbine Oils by Linear Sweep Voltammetry
    ASTM D 1169 : 2002 Standard Test Method for Specific Resistance (Resistivity) of Electrical Insulating Liquids
    ASTM D 7464 : 2019 Standard Practice for Manual Sampling of Liquid Fuels, Associated Materials and Fuel System Components for Microbiological Testing
    ASTM D 6304 : 2016 : EDT 1 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration
    ASTM D 7978 : 2014 : R2019 Standard Test Method for Determination of the Viable Aerobic Microbial Content of Fuels and Associated Water—Thixotropic Gel Culture Method
    ASTM D 2982 : 2007 : R2019 Standard Test Methods for Detecting Glycol-Base Antifreeze in Used Lubricating Oils
    ASTM D 4739 : 2008 Standard Test Method for Base Number Determination by Potentiometric Hydrochloric Acid Titration
    ASTM D 3427 : 2002 Standard Test Method for Air Release Properties of Petroleum Oils
    ASTM D 2982 : 1998 : EDT 1 Standard Test Methods for Detecting Glycol-Base Antifreeze in Used Lubricating Oils
    ASTM D 5185 : 2013 : EDT 1 Standard Test Method for Multielement Determination of Used and Unused Lubricating Oils and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
    ASTM D 7687 : 2011 Standard Test Method for Measurement of Cellular Adenosine Triphosphate in Fuel, Fuel/Water Mixtures, and Fuel-Associated Water with Sample Concentration by Filtration
    ASTM D 6304 : 2004 : REV A Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fisher Titration
    ASTM D 445 : 1988 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and the Calculation of Dynamic Viscosity)
    ASTM D 1298 : 1999 Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
    ASTM D 6304 : 2004 : EDT 1 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fisher Titration
    ASTM D 7155 : 2011 Standard Practice for Evaluating Compatibility of Mixtures of Turbine Lubricating Oils
    ASTM D 4739 : 2017 Standard Test Method for Base Number Determination by Potentiometric Hydrochloric Acid Titration
    ASTM D 7464 : 2008 : R2013 Standard Practice for Manual Sampling of Liquid Fuels, Associated Materials and Fuel System Components for Microbiological Testing
    ASTM D 3524 : 2014 Standard Test Method for Diesel Fuel Diluent in Used Diesel Engine Oils by Gas Chromatography
    ASTM D 4739 : 2006 Standard Test Method for Base Number Determination by Potentiometric Titration
    ASTM D 4057 : 2006 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
    ASTM D 7414 : 2009 Standard Test Method for Condition Monitoring of Oxidation in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
    ASTM D 1500 : 2003 Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)
    ASTM D 7647 : 2010 : R2018 Standard Test Method for Automatic Particle Counting of Lubricating and Hydraulic Fluids Using Dilution Techniques to Eliminate the Contribution of Water and Interfering Soft Particles by Light Extinction
    ASTM D 4739 : 1996 Standard Test Method for Base Number Determination by Potentiometric Titration
    ASTM D 4052 : 2011 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
    ASTM D 1500 : 1982 Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)
    ASTM D 6304 : 2000 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fisher Titration
    ASTM D 1533 : 2000 : R2005 Standard Test Method for Water in Insulating Liquids by Coulometric Karl Fischer Titration
    ASTM D 7687 : 2021 Standard Test Method for Measurement of Cellular Adenosine Triphosphate in Fuel and Fuel-associated Water With Sample Concentration by Filtration
    ASTM D 4052 : 2016 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
    ASTM D 4057 : 2012 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
    ASTM D 3427 : 2014 : REV A : EDT 1 Standard Test Method for Air Release Properties of Petroleum Oils
    ASTM D 2896 : 2001 : EDT 1 Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration
    ASTM D 7843 : 2018 Standard Test Method for Measurement of Lubricant Generated Insoluble Color Bodies in In-Service Turbine Oils using Membrane Patch Colorimetry
    ASTM D 5185 : 2013 Standard Test Method for Multielement Determination of Used and Unused Lubricating Oils and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
    ASTM D 664 : 1995 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
    ASTM D 1500 : 2002 Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)
    ASTM D 7669 : 2015 Standard Guide for Practical Lubricant Condition Data Trend Analysis
    ASTM D 943 : 2018 Standard Test Method for Oxidation Characteristics of Inhibited Mineral Oils
    ASTM D 7647 : 2010 Standard Test Method for Automatic Particle Counting of Lubricating and Hydraulic Fluids Using Dilution Techniques to Eliminate the Contribution of Water and Interfering Soft Particles by Light Extinction
    ASTM D 7546 : 2009 Standard Test Method for Determination of Moisture in New and In-Service Lubricating Oils and Additives by Relative Humidity Sensor
    ASTM D 1169 : 2009 Standard Test Method for Specific Resistance (Resistivity) of Electrical Insulating Liquids
    ASTM D 2272 : 1998 Standard Test Method for Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel
    ASTM D 1500 : 1998 Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)
    ASTM D 1500 : 2012 : R2017 Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)
    ASTM D 2896 : 2001 Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration
    ASTM D 1298 : 1999 : EDT 1 Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
    ASTM D 4739 : 2011 : R2017 Standard Test Method for Base Number Determination by Potentiometric Hydrochloric Acid Titration
    ASTM D 1169 : 2011 Standard Test Method for Specific Resistance (Resistivity) of Electrical Insulating Liquids
    ASTM D 445 : 2019 : REV A Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
    ASTM D 2896 : 2003 Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration
    ASTM E 1064 : 2008 Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration
    ASTM D 1401 : 2002 Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids
    ASTM D 2982 : 1998 : R2004 Standard Test Methods for Detecting Glycol-Base Antifreeze in Used Lubricating Oils
    ASTM D 2273 : 2008 Standard Test Method for Trace Sediment in Lubricating Oils
    ASTM D 7155 : 2020 Standard Practice for Evaluating Compatibility of Mixtures of Turbine Lubricating Oils
    ASTM D 7843 : 2021 Standard Test Method for Measurement of Lubricant Generated Insoluble Color Bodies in In-Service Turbine Oils using Membrane Patch Colorimetry
    ASTM D 2668 : 2002 Standard Test Method for 2,6-di-tert-Butyl- p-Cresol and 2,6-di-tert-Butyl Phenol in Electrical Insulating Oil by Infrared Absorption
    ASTM D 6810 : 2007 Standard Test Method for Measurement of Hindered Phenolic Antioxidant Content in Non-Zinc Turbine Oils by Linear Sweep Voltammetry
    ASTM D 3524 : 1990 : R1999 Standard Test Method for Diesel Fuel Diluent in Used Diesel Engine Oils by Gas Chromatography
    ASTM D 2982 : 1998 Standard Test Methods for Detecting Glycol-Base Antifreeze in Used Lubricating Oils
    ASTM D 2272 : 2014 : REV A Standard Test Method for Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel
    ASTM D 1169 : 1995 Standard Test Method for Specific Resistance (Resistivity) of Electrical Insulating Liquids
    ASTM D 2896 : 2006 Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration
    ASTM D 7464 : 2014 Standard Practice for Manual Sampling of Liquid Fuels, Associated Materials and Fuel System Components for Microbiological Testing
    ASTM D 4378 : 2013 Standard Practice for In-Service Monitoring of Mineral Turbine Oils for Steam, Gas, and Combined Cycle Turbines
    ASTM D 1401 : 2021 Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids
    ASTM D 4052 : 1996 Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter
    ASTM D 4739 : 2008 : EDT 1 Standard Test Method for Base Number Determination by Potentiometric Hydrochloric Acid Titration
    ASTM D 6304 : 2003 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fisher Titration
    ASTM D 2668 : 1996 Standard Test Method for 2,6-Ditertiary-Butyl Para Cresol and 2,6-Ditertiary-Butyl Phenol in Electrical Insulating Oil by Infrared Absorption
    ASTM D 7546 : 2015 Standard Test Method for Determination of Moisture in New and In-Service Lubricating Oils and Additives by Relative Humidity Sensor
    ASTM D 4378 : 2008 Standard Practice for In-Service Monitoring of Mineral Turbine Oils for Steam and Gas Turbines
    ASTM D 2272 : 2009 Standard Test Method for Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel
    ASTM D 7155 : 2018 Standard Practice for Evaluating Compatibility of Mixtures of Turbine Lubricating Oils
    ASTM D 7843 : 2012 Standard Test Method for Measurement of Lubricant Generated Insoluble Color Bodies in In-Service Turbine Oils using Membrane Patch Colorimetry
    ASTM D 5185 : 2009 Standard Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
    ASTM D 445 : 2001 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (the Calculation of Dynamic Viscosity)
    ASTM D 2272 : 2014 Standard Test Method for Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel
    ASTM D 445 : 2021 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
    ASTM D 2896 : 2015 Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration
    ASTM D 1401 : 2012 : EDT 1 Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids
    ASTM D 2273 : 2008 : R2012 Standard Test Method for Trace Sediment in Lubricating Oils
    ASTM E 1064 : 2004 : REV A Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration
    ASTM D 1169 : 2002 : EDT 1 Standard Test Method for Specific Resistance (Resistivity) of Electrical Insulating Liquids
    ASTM D 7414 : 2018 Standard Test Method for Condition Monitoring of Oxidation in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
    ASTM D 6971 : 2004 Standard Test Method for Measurement of Hindered Phenolic and Aromatic Amine Antioxidant Content in Non-zinc Turbine Oils by Linear Sweep Voltammetry
    ASTM D 3427 : 2006 Standard Test Method for Air Release Properties of Petroleum Oils
    ASTM D 2422 : 1997 : R2013 Standard Classification of Industrial Fluid Lubricants by Viscosity System
    ASTM D 2273 : 2005 Standard Test Method for Trace Sediment in Lubricating Oils
    ASTM D 2896 : 2007 Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration
    ASTM D 3427 : 2007 Standard Test Method for Air Release Properties of Petroleum Oils
    ASTM D 5185 : 2002 : EDT 1 Standard Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
    ASTM D 2272 : 2002 Standard Test Method for Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel
    ASTM D 3427 : 2019 Standard Test Method for Air Release Properties of Hydrocarbon Based Oils
    ASTM D 1169 : 2019 Standard Test Method for Specific Resistance (Resistivity) of Electrical Insulating Liquids
    ASTM D 4378 : 1997 Standard Practice for In-Service Monitoring of Mineral Turbine Oils for Steam and Gas Turbines
    ASTM D 1298 : 1985 : R1990 : EDT 1 Standard Practice for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
    ASTM D 943 : 1999 Standard Test Method for Oxidation Characteristics of Inhibited Mineral Oils
    ASTM D 7720 : 2011 : R2017 Standard Guide for Statistically Evaluating Measurand Alarm Limits when Using Oil Analysis to Monitor Equipment and Oil for Fitness and Contamination
    ASTM D 2422 : 1997 : R2002 Standard Classification of Industrial Fluid Lubricants by Viscosity System
    ASTM D 5185 : 2002 : EDT 2 Standard Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
    ASTM D 1401 : 2018 : REV A Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids
    ASTM D 4739 : 2011 Standard Test Method for Base Number Determination by Potentiometric Hydrochloric Acid Titration
    ASTM D 1500 : 2004 : REV A Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)
    ASTM D 3427 : 2012 Standard Test Method for Air Release Properties of Petroleum Oils
    ASTM D 1500 : 2007 Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)
    ASTM D 4739 : 2002 Standard Test Method for Base Number Determination by Potentiometric Titration
    ASTM D 1401 : 2012 Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids
    ASTM D 4052 : 2015 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
    ASTM D 445 : 2021 : EDT 1 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
    ASTM D 4057 : 1995 : R2000 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
    ASTM D 4739 : 2006 : REV A Standard Test Method for Base Number Determination by Potentiometric Titration
    ASTM D 7843 : 2016 Standard Test Method for Measurement of Lubricant Generated Insoluble Color Bodies in In-Service Turbine Oils using Membrane Patch Colorimetry
    ASTM D 2272 : 2011 Standard Test Method for Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel
    ASTM D 3427 : 2014 Standard Test Method for Air Release Properties of Petroleum Oils
    ASTM D 1169 : 2019 : REV A Standard Test Method for Specific Resistance (Resistivity) of Electrical Insulating Liquids
    ASTM D 257 : 2014 : R2021 : EDT 1 Standard Test Methods for DC Resistance or Conductance of Insulating Materials
    ASTM D 2896 : 2021 Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration
    ASTM D 1401 : 2010 Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids
    ASTM D 4057 : 2006 : R2011 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
    ASTM D 1533 : 2000 Standard Test Method for Water in Insulating Liquids by Coulometric Karl Fischer Titration
    ASTM E 1064 : 2016 Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration
    ASTM D 6810 : 2021 Standard Test Method for Measurement of Hindered Phenolic Antioxidant Content in Non-Zinc Turbine Oils by Linear Sweep Voltammetry
    ASTM D 2668 : 2007 : R2021 Standard Test Method for 2,6-di-tert-Butyl- p-Cresol and 2,6-di-tert-Butyl Phenol in Electrical Insulating Oil by Infrared Absorption
    ASTM D 4052 : 2018 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
    ASTM D 2273 : 2008 : R2016 Standard Test Method for Trace Sediment in Lubricating Oils (Withdrawn 2023)
    ASTM D 7464 : 2008 Standard Practice for Manual Sampling of Liquid Fuels, Associated Materials and Fuel System Components for Microbiological Testing
    ASTM D 3427 : 1999 Standard Test Method for Air Release Properties of Petroleum Oils
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective