ASTM D 6357 : 2021 : REV B
Current
The latest, up-to-date edition.
Standard Test Methods for Determination of Trace Elements in Coal, Coke, and Combustion Residues from Coal Utilization Processes by Inductively Coupled Plasma Atomic Emission Spectrometry, Inductively Coupled Plasma Mass Spectrometry, and Graphite Furnace Atomic Absorption Spectrometry
Hardcopy , PDF
English
17-12-2021
Important note : Users cannot be edited or removed once added to your Multi user PDF.| Committee |
D 05
|
| DocumentType |
Test Method
|
| Pages |
16
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1These test methods pertain to the determination of antimony, arsenic, beryllium, cadmium, chromium, cobalt, copper, lead, manganese, molybdenum, nickel, vanadium, and zinc in coal and coke. These test methods can also be used for the analysis of residues from coal combustion processes. Additionally, there are specific test methods outlined that pertain to the determination of rare earth elements in coal and coal combustion residues.
Note 1:These test methods may be applicable to the determination of other trace elements.
Note 2:Rare earth elements are understood to include: cerium, dysprosium, erbium, europium, gadolinium, holmium, lanthanum, lutetium, neodymium, praseodymium, samarium, scandium, terbium, thulium, ytterbium, and yttrium.
1.2Units—The values stated in SI units are to be regarded as standard. The values given in parentheses after SI units are provided for information only and are not considered standard.
1.2.1All percentages are percent mass fractions unless otherwise noted.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM D 7348 : 2021 | Standard Test Methods for Loss on Ignition (LOI) of Solid Combustion Residues |
| ASTM D 5016 : 2016 | Standard Test Method for Total Sulfur in Coal and Coke Combustion Residues Using a High-Temperature Tube Furnace Combustion Method with Infrared Absorption |
| ASTM D 3174 : 2012 : R2018 : EDT 1 | Standard Test Method for Ash in the Analysis Sample of Coal and Coke from Coal |
| ASTM D 7260 : 2020 | Standard Practice for Optimization, Calibration, and Validation of Inductively Coupled Plasma-Atomic Emission Spectrometry (ICP-AES) for Elemental Analysis of Petroleum Products and Lubricants |
| ASTM D 8146 : 2022 | Standard Guide for Evaluating Test Method Capability and Fitness for Use |
| ASTM D 7582 : 2015 : R2023 | Standard Test Methods for Proximate Analysis of Coal and Coke by Macro Thermogravimetric Analysis |
| ASTM D 8146 : 2018 | Standard Guide for Evaluating Test Method Capability and Fitness for Use |
| ASTM D 3180 : 2015 | Standard Practice for Calculating Coal and Coke Analyses from As-Determined to Different Bases |
| ASTM E 691 : 2023 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM D 7582 : 2024 | Standard Test Methods for Proximate Analysis of Coal and Coke by Macro Thermogravimetric Analysis |
| ASTM D 7582 : 2015 | Standard Test Methods for Proximate Analysis of Coal and Coke by Macro Thermogravimetric Analysis |
| ASTM D 121 : 2015 : R2024 | Standard Terminology of Coal and Coke |
| ASTM E 691 : 2022 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM D 121 : 2024 | Standard Terminology of Coal and Coke |
| ASTM D 121 : 2015 | Standard Terminology of Coal and Coke |
| ASTM E 691 : 2021 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM D 3180 : 2015 : R2023 | Standard Practice for Calculating Coal and Coke Analyses from As-Determined to Different Bases |
| ASTM D 7448 : 2016 | Standard Practice for Establishing the Competence of Laboratories Using ASTM Procedures in the Sampling and Analysis of Coal and Coke (Withdrawn 2024) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.