Skip to content
Please enter a keyword to search

  • ASTM D 6376 : 2010 : R2017 : EDT 1

    Current The latest, up-to-date edition.

    Standard Test Method for Determination of Trace Metals in Petroleum Coke by Wavelength Dispersive X-ray Fluorescence Spectroscopy

    Available format(s):  Hardcopy, PDF

    Language(s):  English

    Published date:  01-01-2017

    Publisher:  American Society for Testing and Materials

    Add To Cart

    Abstract - (Show below) - (Hide below)

    This test method covers the X-ray fluorescence spectrometric determination of total sulfur and trace metals in samples of raw or calcined petroleum coke.

    Scope - (Show below) - (Hide below)

    1.1This test method covers the X-ray fluorescence spectrometric determination of total sulfur and trace metals in samples of raw or calcined petroleum coke. Elements determined using this test method are listed in Table 1.

    1.2Detection limits, sensitivity, and optimal element ranges will vary with matrices, spectrometer type, analyzing crystal, and other instrument conditions and parameters.

    1.3All analytes are determined as the element and reported as such. These include all elements listed in Table 1. This test method may be applicable to additional elements or concentration ranges if sufficient standards are available to produce proper calibration equations.

    1.4The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

    1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

    General Product Information - (Show below) - (Hide below)

    Committee D 02
    Document Type Test Method
    Product Note Reconfirmed EDT 1
    Publisher American Society for Testing and Materials
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    ASTM D 6969 : 2017 Standard Practice for Preparation of Calcined Petroleum Coke Samples for Analysis

    Standards Referencing This Book - (Show below) - (Hide below)

    ASTM D 4057 : 2019 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
    ASTM D 6969 : 2017 Standard Practice for Preparation of Calcined Petroleum Coke Samples for Analysis
    ASTM D 1552 : 2003 Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
    ASTM D 4057 : 1995 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
    ASTM E 11 : 2020 Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves
    ASTM D 5600 : 2004 : EDT 1 Standard Test Method for Trace Metals in Petroleum Coke by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
    ASTM D 5600 : 2009 Standard Test Method for Trace Metals in Petroleum Coke by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
    ASTM D 6970 : 2003 : R2008 Standard Practice for Collection of Calcined Petroleum Coke Samples for Analysis
    ASTM D 5600 : 2014 Standard Test Method for Trace Metals in Petroleum Coke by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
    ASTM D 5056 : 2017 Standard Test Method for Trace Metals in Petroleum Coke by Atomic Absorption
    ASTM D 5600 : 2017 : REDLINE Standard Test Method for Trace Metals in Petroleum Coke by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
    ASTM D 1552 : 2008 : R2014 Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
    ASTM D 4057 : 2012 : R2018 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
    ASTM D 1552 : 1990 : EDT 1 Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
    ASTM D 6970 : 2003 : R2013 : EDT 1 Standard Practice for Collection of Calcined Petroleum Coke Samples for Analysis
    ASTM D 1552 : 2016 Standard Test Method for Sulfur in Petroleum Products by High Temperature Combustion and Infrared (IR) Detection or Thermal Conducitivity Detection (TCD)
    ASTM D 4057 : 1981 : EDT 2 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
    ASTM D 1552 : 2000 Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
    ASTM D 6969 : 2003 Standard Practice for Preparation of Calcined Petroleum Coke Samples for Analysis
    ASTM D 5600 : 1998 Standard Test Method for Trace Metals in Petroleum Coke by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
    ASTM D 5056 : 2017 : REDLINE Standard Test Method for Trace Metals in Petroleum Coke by Atomic Absorption
    ASTM E 11 : 2022 Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves
    ASTM D 1552 : 2023 Standard Test Method for Sulfur in Petroleum Products by High Temperature Combustion and Infrared (IR) Detection or Thermal Conductivity Detection (TCD)
    ASTM D 4057 : 2006 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
    ASTM D 6969 : 2003 : R2008 Standard Practice for Preparation of Calcined Petroleum Coke Samples for Analysis
    ASTM D 4057 : 2012 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
    ASTM D 5056 : 1996 Standard Test Method for Trace Metals in Petroleum Coke by Atomic Absorption
    ASTM D 5056 : 2004 : R2010 Standard Test Method for Trace Metals in Petroleum Coke by Atomic Absorption
    ASTM D 1552 : 2016 : EDT 1 Standard Test Method for Sulfur in Petroleum Products by High Temperature Combustion and Infrared (IR) Detection or Thermal Conductivity Detection (TCD)
    ASTM D 5600 : 2022 Standard Test Method for Trace Metals in Petroleum Coke by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
    ASTM D 1552 : 2007 Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
    ASTM D 1552 : 1995 Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
    ASTM D 1552 : 2015 Standard Test Method for Sulfur in Petroleum Products by High Temperature Combustion and IR Detection
    ASTM D 1552 : 2001 Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
    ASTM D 5056 : 2002 Standard Test Method for Trace Metals in Petroleum Coke by Atomic Absorption
    ASTM D 1552 : 2008 : R2014 : EDT 1 Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
    ASTM D 5600 : 2017 Standard Test Method for Trace Metals in Petroleum Coke by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
    ASTM E 11 : 2017 : REDLINE Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves
    ASTM D 5600 : 2004 Standard Test Method for Trace Metals in Petroleum Coke by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
    ASTM D 5056 : 2015 Standard Test Method for Trace Metals in Petroleum Coke by Atomic Absorption
    ASTM D 6969 : 2023 Standard Practice for Preparation of Calcined Petroleum Coke Samples for Analysis
    ASTM D 4057 : 2022 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
    ASTM D 1552 : 2008 Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
    ASTM D 6969 : 2016 Standard Practice for Preparation of Calcined Petroleum Coke Samples for Analysis
    ASTM D 6970 : 2003 Standard Practice for Collection of Calcined Petroleum Coke Samples for Analysis
    ASTM D 4057 : 1995 : R2000 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
    ASTM D 6969 : 2017 : REDLINE Standard Practice for Preparation of Calcined Petroleum Coke Samples for Analysis
    ASTM D 6969 : 2015 Standard Practice for Preparation of Calcined Petroleum Coke Samples for Analysis
    ASTM D 6970 : 2003 : R2019 Standard Practice for Collection of Calcined Petroleum Coke Samples for Analysis
    ASTM D 1552 : 2016 : R2021 Standard Test Method for Sulfur in Petroleum Products by High Temperature Combustion and Infrared (IR) Detection or Thermal Conductivity Detection (TCD)
    ASTM D 5056 : 2022 Standard Test Method for Trace Metals in Petroleum Coke by Atomic Absorption
    ASTM D 4057 : 2006 : R2011 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
    ASTM D 1552 : 1983 Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
    ASTM D 5056 : 2004 Standard Test Method for Trace Metals in Petroleum Coke by Atomic Absorption
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective