ASTM D 6570 : 2018 : REV A
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practice for Assigning Allowable Properties for Mechanically Graded Lumber
Hardcopy , PDF
12-08-2023
English
30-10-2018
This practice covers the methodology of grade qualification, assignment of design properties, and requirements for the quality control of mechanically graded solid sawn lumber.
Committee |
D 07
|
DocumentType |
Standard Practice
|
Pages |
9
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This practice covers the methodology of grade qualification, assignment of design properties, and requirements for the quality control of mechanically graded solid sawn lumber.
1.2This practice acknowledges alternative methods for the assignment of specific properties. These methods are assignment by test, relationship to other properties, and by procedures in other appropriate standards.
1.3This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM D 2915 : 2017 | Standard Practice for Sampling and Data-Analysis for Structural Wood and Wood-Based Products |
ASTM D 1165 : 1980 : R1994 : EDT 1 | Standard Nonmenclature of Domestic Hardwoods and Softwoods (Withdrawn 2002) |
ASTM D 1165 : 2007 | Standard Nomenclature of Commercial Hardwoods and Softwoods |
ASTM D 3737 : 2008 | Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam) |
ASTM D 9 : 2020 | Standard Terminology Relating to Wood and Wood-Based Products |
ASTM D 143 : 2022 | Standard Test Methods for Small Clear Specimens of Timber |
ASTM D 2555 : 2005 | Standard Practice for Establishing Clear Wood Strength Values |
ASTM D 1990 : 2000 : R2002 : EDT 1 | Standard Practice for Establishing Allowable Properties for Visually-Graded Dimension Lumber from In-Grade Tests of Full-Size Specimens |
ASTM D 1990 : 2007 | Standard Practice for Establishing Allowable Properties for Visually-Graded Dimension Lumber from In-Grade Tests of Full-Size Specimens |
ASTM D 4761 : 2013 | Standard Test Methods for Mechanical Properties of Lumber and Wood-Base Structural Material |
ASTM D 4442 : 2007 | Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Base Materials |
ASTM D 3737 : 2001 : REV B | Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam) |
ASTM D 2915 : 2017 | Standard Practice for Sampling and Data-Analysis for Structural Wood and Wood-Based Products |
ASTM D 3737 : 2012 | Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam) |
ASTM D 3737 : 2018 | Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam) |
ASTM D 2555 : 2006 | Standard Practice for Establishing Clear Wood Strength Values |
ASTM D 1990 : 2016 | Standard Practice for Establishing Allowable Properties for Visually-Graded Dimension Lumber from In-Grade Tests of Full-Size Specimens |
ASTM D 2395 : 1993 : R1997 : EDT 2 | Standard Test Methods for Specific Gravity of Wood and Wood-Based Materials |
ASTM D 7438 : 2020 | Standard Practice for Field Calibration and Application of Hand-Held Moisture Meters |
ASTM D 143 : 2014 | Standard Test Methods for Small Clear Specimens of Timber |
ASTM D 1990 : 2000 : EDT 1 | Standard Practice for Establishing Allowable Properties for Visually-Graded Dimension Lumber from In-Grade Tests of Full-Size Specimens |
ASTM D 4442 : 2015 | Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Based Materials |
ASTM D 2555 : 2017 | Standard Practice for Establishing Clear Wood Strength Values |
ASTM D 4761 : 2002 | Standard Test Methods for Mechanical Properties of Lumber and Wood-Base Structural Material |
ASTM D 245 : 2022 | Standard Practice for Establishing Structural Grades and Related Allowable Properties for Visually Graded Lumber |
ASTM D 245 : 2006 : R2019 | Standard Practice for Establishing Structural Grades and Related Allowable Properties for Visually Graded Lumber |
ASTM D 4761 : 2011 | Standard Test Methods for Mechanical Properties of Lumber and Wood-Base Structural Material |
ASTM D 2555 : 2006 : R2011 | Standard Practice for Establishing Clear Wood Strength Values |
ASTM D 3737 : 2009 : EDT 1 | Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam) |
ASTM D 198 : 2021 | Standard Test Methods of Static Tests of Lumber in Structural Sizes |
ASTM D 4761 : 2018 | Standard Test Methods for Mechanical Properties of Lumber and Wood-Based Structural Materials |
ASTM D 4442 : 2016 | Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Based Materials |
ASTM D 2395 : 2017 : R2022 | Standard Test Methods for Density and Specific Gravity (Relative Density) of Wood and Wood-Based Materials |
ASTM D 2395 : 1993 : R1997 : EDT 1 | Standard Test Methods for Specific Gravity of Wood and Wood-Based Materials |
ASTM D 1165 : 2018 | Standard Nomenclature of Commercial Hardwoods and Softwoods |
ASTM D 7438 : 2013 | Standard Practice for Field Calibration and Application of Hand-Held Moisture Meters |
ASTM D 2395 : 2007 : REV A | Standard Test Methods for Specific Gravity of Wood and Wood-Based Materials |
ASTM D 4761 : 2019 | Standard Test Methods for Mechanical Properties of Lumber and Wood-Based Structural Materials |
ASTM D 2395 : 2017 | Standard Test Methods for Density and Specific Gravity (Relative Density) of Wood and Wood-Based Materials |
ASTM D 2915 : 2003 | Standard Practice for Evaluating Allowable Properties for Grades of Structural Lumber |
ASTM D 4761 : 2005 | Standard Test Methods for Mechanical Properties of Lumber and Wood-Base Structural Material |
ASTM D 2915 : 2017 : R2022 | Standard Practice for Sampling and Data-Analysis for Structural Wood and Wood-Based Products |
ASTM D 7438 : 2008 | Standard Practice for Field Calibration and Application of Hand-Held Moisture Meters |
ASTM D 1990 : 2019 | Standard Practice for Establishing Allowable Properties for Visually-Graded Dimension Lumber from In-Grade Tests of Full-Size Specimens |
ASTM D 4442 : 2020 | Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Based Materials |
ASTM D 3737 : 2009 | Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam) |
ASTM D 3737 : 2018 : EDT 1 | Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam) |
ASTM D 2555 : 2017 : REV A | Standard Practice for Establishing Clear Wood Strength Values |
ASTM D 3737 : 2002 | Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam) |
ASTM D 3737 : 2007 | Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam) |
ASTM D 198 : 2021 : REV A | Standard Test Methods of Static Tests of Lumber in Structural Sizes |
ASTM D 2395 : 2014 : EDT 1 | Standard Test Methods for Density and Specific Gravity (Relative Density) of Wood and Wood-Based Materials |
ASTM D 2395 : 2014 | Standard Test Methods for Density and Specific Gravity (Relative Density) of Wood and Wood-Based Materials |
ASTM D 198 : 2022 | Standard Test Methods of Static Tests of Lumber in Structural Sizes |
ASTM D 2395 : 2006 | Standard Test Methods for Specific Gravity of Wood and Wood-Based Materials |
ASTM D 3737 : 2006 | Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam) |
ASTM D 3737 : 2003 | Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam) |
ASTM D 2555 : 2005 : REV A | Standard Practice for Establishing Clear Wood Strength Values |
ASTM D 2555 : 1998 | Standard Test Methods for Establishing Clear Wood Strength Values |
ASTM D 143 : 2021 | Standard Test Methods for Small Clear Specimens of Timber |
ASTM D 3737 : 2000 : REV A | Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam) |
ASTM D 3737 : 2004 | Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam) |
ASTM D 2395 : 2007 : REV A : EDT 1 | Standard Test Methods for Specific Gravity of Wood and Wood-Based Materials |
ASTM D 1165 : 2003 | Standard Nonmenclature of Domestic Hardwoods and Softwoods |
ASTM D 1990 : 2014 | Standard Practice for Establishing Allowable Properties for Visually-Graded Dimension Lumber from In-Grade Tests of Full-Size Specimens |
ASTM D 2555 : 1998 : EDT 1 | Standard Test Methods for Establishing Clear Wood Strength Values |
ASTM D 1165 : 2013 | Standard Nomenclature of Commercial Hardwoods and Softwoods |
ASTM D 4761 : 2002 : REV A | Standard Test Methods for Mechanical Properties of Lumber and Wood-Base Structural Material |
ASTM D 198 : 2022 : REV A | Standard Test Methods of Static Tests of Lumber in Structural Sizes |
ASTM D 2915 : 2010 | Practice for Sampling and Data-Analysis for Structural Wood and Wood-Based Products |
ASTM D 2915 : 1998 : EDT 1 | Standard Practice for Evaluating Allowable Properties for Grades of Structural Lumber |
ASTM D 2555 : 2015 | Standard Practice for Establishing Clear Wood Strength Values |
ASTM D 2915 : 2002 | Standard Practice for Evaluating Allowable Properties for Grades of Structural Lumber |
ASTM D 2395 : 2002 | Standard Test Methods for Specific Gravity of Wood and Wood-Based Materials |
ASTM D 198 : 2015 | Standard Test Methods of Static Tests of Lumber in Structural Sizes |
ASTM D 4442 : 1992 : R1997 : EDT 1 | Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Base Materials |
ASTM D 4442 : 1984 | Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Base Materials |
ASTM D 4442 : 1992 : R2003 | Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Base Materials |
ASTM D 3737 : 2005 | Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam) |
ASTM D 2555 : 2016 | Standard Practice for Establishing Clear Wood Strength Values |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.